Corrections made to WGDC base
With Ænema's help I was taught how to adjust my WGDC Base. Before I install it and test it out on the road just want to make sure I didn't screw up. I mostly focused on Boost Mean vs. Requested Boost and were i saw boost mean overshoot requested boost I reduced the closest corresponding value in the WGDC Base table by 5% unless indicated differently below.
There was one spot at around 280 MAF and 2.167 setpoint where I saw some throttle closures evidenced by TPS Act% going under 80.98 accompanied with boost mean overshooting requested boost as well so I reduced this value by 7.5%
At around 240 MAF and 2.073% setpoint there were more severe discrepancies between boost mean and boost requested so I also reduced this value by 7.5%
Attached are a graph of my before log and the an excel of the corresponding data as well as a screen shot of ATR AFTER the edits were made.
How did I do?
|