Quote:
Originally Posted by blackbeast06
I did the devils own setup with stainless lines. It has been rock solid so far with only a slight issue with the solenoid. If you ground the DO solenoid to the BMS fsb it may not work, I had to ground the solenoid to the chassis. This was an issue that another member had as well. I am only using one DO10 nozzle, I have read that is enough spray for FBO. People have talked about loosing atomization with two nozzles, I have no facts to back that up though.
|
You lose atomization with 1 big nozzle, you gain atomization with 2 small nozzles.
Quote:
Originally Posted by j1gilles
Just go with the BMS CM kit... You cannot go wrong for the price
|
I agree if using JB4.