Quote:
Originally Posted by ska325xi
I already did one...please check DIY section
|
thanks for the link. i'm def going to do this.
with that being said, i have few questions on step 3 of your diy as i'm wiring noobie!
Quote:
If you have empty pin slots, then insert 2 wires you made with the pin connectors (these 2 wires will need to be approx. 2.5 feet long).
If you have 2 yellow wires in pin #2&4, then remove the pins and follow above. Make sure to tape up the unused pins of the yellow wires and secure them.
|
1) what do you mean by follow above if there are two yellow wires as picutred? take it out those two yellow wires from pin # 2&4 and insert those 2 new wires? just take it out that's it?
2) so which wires are pin #2 and pin #4? blue? green? little lack of info there or am i missing something?
3) another question is that on the picture below, i see green/purple/blue/white and the diagram alan put together has different colors so where do i exactly tab those two wires into?