[JustinGTP]

Try this

Erasure of initialization:
 Open door window glass fully
 Operate power window switch in "Open" position four times
within 10 seconds
This erases initialization of the power window, anti-trapping
protection and toll function are inactive.
Check whether one-touch control (toll) function is inactive,
otherwise repeat procedure.
Reinitialization:
Avoid a break between the two steps!
 Open door window glass fully
 Operate and hold power window switch in "Close" position
(second switch stage)
 Once the upper end position has been reached, hold power
window switch in "Close" position for approx. 2 seconds longer
 Open door window glass fully
 Operate and hold power window switch in "Close" position
(second switch stage)
 Once the upper end position has been reached, hold power
window switch in "Close" position for approx. 2 seconds longer
This completes initialization.
Note:
Carry out function check (one-touch control function, anti-trapping
protection and, if necessary, comfort function).