Quote:
Originally Posted by Woody80
Cool, I was going to send you a PM. Were they easy/quick to fit?
|
Well for me they were fine to fit. I did have 2 issues which took me longer than needed.
Using the DIY on the thread, you can "click" each side of the airbag out. Then there should be 2 clips on the back of the airbag unit. I used a trim tool to push up, see the pic. It's not the same unit but the principle is the same:
http://www.rogueengineering.com/Merc...wheel/clip.jpg
Once you do that the clips should clip out with a little force and you can place the unit somewhere.
The other thing which was tricky was unscrewing the T20 screws behind the wheel to take the steering wheel cover off. It's certainly not hard, i just didn't have a short enough T20 as there's not much room. But you'll be fine, it's all easy enough. The actual paddles are a direct replacement so they should just screw and clip in