Quote:
|
Originally Posted by rader1
Quote:
Originally Posted by enrita
Log both with all cylinders timings . Do this after at least 5 pulls 3-4-5 gear.
|
Where I live I'm lucky if I can find enough straight road for a 2-3-4 pull. I live in a very rural area but it's nothing but curves and drastic elavation shifts.
Quote:
Originally Posted by 2Times
Flashed v401 stage2+ Sport ST, ran out and did 2 quick logs... probably not 100% accurate since my ecu hasn't completely had time to adjust. Cyl 4 is pulling a little timing for a split second, had that before but that went away after a day. For some reason, I couldn't get it to log properly, it would either drop off the front end or the back end of the pull. Both pulls were in 4th gear.
|
Try logging cyl timing instead of correction. You'll get a better idea of what's going on. |
i thought it was correction that was undesirable so logged. not timing itself