As the title suggests, the code reading function function is done. So with the new update, you can now read the codes before clearing them
We'd like to post up the firmware update this week. But before we do that, we'd like to beta test the feature in the field for a few days. So if you are interested in testing the new goods, shoot me an email (shiv@vishnutuning.com) and put "Code Reading Beta" in the subject line. I will send an email containg the new firmware file and documentation on
Monday night. The procedure is really quite elegent.
Here's how it works right now:
It works just like the original code clearing demo shown here:
Except now, the codes are displayed/logged in the User Software (DME Diagnostic Codes) upon first throttle application ("arming" step).
The second throttle application (clearing step) clears the codes.
The codes numbers are listed and cycled through in 1 second increments. If there are 3 codes, for instance, it will cycle through them in 3 seconds. Pretty simple.
So yes, you will need your laptop to read codes (for now, at least). And yes, you will need to refer to a code list (which we have put together) to see the code description. This list will be part of the documention which you can keep on your laptop for reference. And yes, this reads ALL codes. Extended or otherwise.
What's next on the agenda (in no particular order):
1) Data logging canbus data (ign advance, knock status, throttle angle, etc,.)
2) Mapswitching via factory button on steering wheel
3) Boost display in dash
4) Autotuning
Cheers,
shiv