Okay, this is for anyone that has either done the "silencer" delete mod, and/or the charcoal filter delete mod.
I removed the charcoal filter and now i cant get the actual intake back on.
It all started when i couldnt get the hose to connect to where the intake hole is. it is a very very tight fit and i doubt anyone who did this charcoal delete mod truly/completely refitted their intake hose onto the intake. it has to go
all the way back on and it snaps into place due to the shape.
after attempting to do this by pulling on the hose and getting it to fit for an hour, i gave up, and i removed the hose from the other side, and then within 5 minutes i could get the leverage i needed to connect the hose back onto the intake. but now i cannot connect the other end of the hose back to the engine.
How did you guys reconnect this part. Either by the method of connecting the hose to the intake, and then to the engine. or just leaving the hose connected to the engine and then connecting the intake to the hole. Seems impossible to do either way for me.
This was of course, all accomplished in an open area parking lot when it was 0 degrees F. I need help since now
i cant drive my car!! Someone please help.
http://e90post.com/forums/showthread.php?t=46144