Quote:
Originally Posted by CT335xi
Quote:
Originally Posted by chillbil79
Here are some pics
Since I'm hitting the strut I think a 5mm will work fine and still allow some lip left on hub
I'm measuring again this week. So a 5mm would be 35mm offset in front and 20 in rear
|
From the looks of your pics , I assuming the front wheel in the picture is with the 15 mm spacer on ? I agree the 5 mm spacer would work nicely but also think a 10 may look real nice too. By looking at the picture if that is the 15 mm spacer , its not sticking out to far past the fender. So even with a 10 mm it would stick back in almost a 1/4 inch back , but a 5 mm is probably perfect. Keep in mind that if down the road you lower the car the camber will also dip the top of the tire in a little.
|
Yes. 15mm up front. Going 3/4/5 mm so I still have enough lip on hub for a good fit
Since 20mm in rear I think a 10mm would stick out too far.
Ill post pics once I get appropriate spacers on