Quote:
Originally Posted by Frobius
Hi guys,
Just to let you know, this can be done without the harness that's talked about on the coding forum.
To get the halogen light angel eyes as DRL (on all the time) and still working as welcome lights, the following lines need to be looked at in the NFRM.
VERHALTEN_DRL_TFL
drl_s
DRL_TFL_MIT_BFD
nicht_aktiv
DRL_TFL_MIT_NSW
nicht_aktiv
DRL_TFL_MIT_BLK_V_GED
nicht_aktiv
DRL_TFL_MIT_SML
aktiv
DRL_TFL_MIT_KZL
nicht_aktiv
DRL_TFL_MIT_RL_BL_2
nicht_aktiv
DRL_TFL_MIT_RL_BL_1
nicht_aktiv
DRL_TFL_MIT_RL_BL
nicht_aktiv
The red ones are the lines I had to change but I've copied the others just to make sure. Once this is done, just go into the OBC and enable the DRL - Voila!
Note that this is for cars with halogen LCI angel eyes, I'm not sure of the procedure for cars with Xenon lights but I believe it's roughly similar.
Did my main beam flash on alarm, beep on lock & unlock, digital speed in OBC, closing window doesn't stop when opening door and digital speed correction while I was at it.   |
Hey Frobius! thanks for this. I got the DRL's working using the above ^^, but the AE welcome lights stopped working
are you able to paste in your FRM PSW MAN file here? Any help is much appreciated. thanks.