BMW 3-Series (E90 E92) Forum - View Single Post - FULL SWS-8 sub and amp install, 34 pictures, step by step

archaicbark · 08-17-2011, 02:08 PM

--------------------------------------------------------------------------------

Searched forever for this, and nothing but typical snide remarks. Hope this helps someone.
Must replace seat bolts when replacing seats in car, part number 07 14 7 146 686. Apparently bolts are coated for ?corrosion protection and safety.

See this link: http://tis.spaghetticoder.org/s/view.pl?1/08/07/70

Seat bolt torque is 35Nm.
***"Carpet must not get between seat rails and floor pan in area of fastening points (grating noises). "

Hope this helps someone else.

08-17-2011, 02:08 PM	#73
archaicbark New Member 3 Rep 16 Posts Drives: 2011 335d Sedan Join Date: Jul 2011 Location: Phoenix, AZ iTrader: (0)	Seat reinstallation info. -------------------------------------------------------------------------------- Searched forever for this, and nothing but typical snide remarks. Hope this helps someone. Must replace seat bolts when replacing seats in car, part number 07 14 7 146 686. Apparently bolts are coated for ?corrosion protection and safety. See this link: http://tis.spaghetticoder.org/s/view.pl?1/08/07/70 Seat bolt torque is 35Nm. ***"Carpet must not get between seat rails and floor pan in area of fastening points (grating noises). " Hope this helps someone else.
	Appreciate 0 Quote