Quote:
Originally Posted by *******_
This is all functions you need to change to get rid of bulb errors :
Warm test Brake
WARMUEBERWACHUNG_BL_MI -> nicht_aktiv
Cold Test Brake
KALTUEBERWACHUNG_BL_MI -> nicht_aktiv
Warm test turn
WARMUEBERWACHUNG_BLK_HI -> nicht_aktiv
Cold test turn
KALTUEBERWACHUNG_BLK_HI -> nicht_aktiv
cold rear turn signal...
KALTUEBERWACHUNG_BLK_H -> nicht_aktiv
cold brake light.....
KALTUEBERWACHUNG_BL -> nicht_aktiv
warm rear turn signal...
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv
warm brake light..
WARMUEBERWACHUNG_BL -> nicht_aktiv
Brake force display
CC_MELD_BFD_BL -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_L -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_R -> nicht_aktiv
[[Cold Test Brake Light]]
KALTUEBERWACHUNG_BL -> nicht_aktiv
[[Warm Test Blinker Rear]]
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv
[[Warm Test Brake Light]]
WARMUEBERWACHUNG_BL -> nicht_aktiv
[[Cold Test Brake Force Display]]
KALTUEBERWACHUNG_BFD <--Cold BFD test
[[Warm Test Brake Force Display]]
WARMUEBERWACHUNG_BFD <--Warm BFD test
WARMUEBERWACHUNG_BLK_H
You may not have all features , they are from my nfrm but most of them should present in your module.
Greets from Poland
|
Thank you sooo much. We'll go through each one this coming weekend to make sure we didn't miss anything. Greets from Seattle!!
~Ben