Quote:
Originally Posted by Rotary Rasp
Yes you are correct; however, once you modify that value in the NETTODAT file, that overrides everything else. In other words, If you set it to 13 volts by coding NETTODAT, it will always be 13 volts regardless if the lights are on or off.
|
I was in the other coding forum and discovered that PWM_RL_BL_1_FKT_BL is the setting for the AE when low beams are not on. I confirmed it by coding it to a low voltage and it dimmed the AE's with headlights off. However, the default voltage is set at 13V which is why you thought PWM_RL_BL_1_FKT_SL changes both. Hope that helps.