View Single Post
      03-10-2011, 07:19 PM   #2170
NiVeDh
Major General
NiVeDh's Avatar
United_States
420
Rep
8,004
Posts

Drives: '08 E90 335i, '99 E36 M3
Join Date: Apr 2009
Location: Houston, TX & Atlanta, GA

iTrader: (132)

Garage List
Quote:
Originally Posted by ERIK335i View Post
I recently installed an alarm retrofit kit for my 2010 E90 LCI and now can't seem to get the alarm activated. I updated CAS AND NFRM with +K302, didn't work. I removed +K302 and used $302, alarm still not working.

I went into DWAI and activated the lock/unlock chirps. They work fine. The clown nose blinked prior to me coding. Holding down the panic button (tried for 10 seconds) does not sound off the alarm. I even changed PANIK_ALARM in DWAI to aktiv.

By the way the chirps on my car sound great... no low volume like others have reported after activating theirs.

Also, no i-drive in my car, so I can't change the chirp settings like someone mentioned to me.

what else can I try? Thanks in advance.
After you write $302 to VO (which is stored in more than one module), you need to re-code all modules so they recognize the new VO.
Appreciate 0