View Single Post
      02-25-2011, 01:01 PM   #23
Edward
Colonel
United_States
377
Rep
2,981
Posts

Drives: 2013.9999 E92 Jerez ZCP
Join Date: May 2010
Location: Los Angeles

iTrader: (2)

Quote:
Originally Posted by swifty View Post
Thanks for the valuable info. Will defn do 10mm and 12 in the back. I read ppl were having issues with the smaller spacers in the front but I didn't understand why.

Also I'm interested in doing Muteki (http://www.weaksauceparts.com/store/...at=2173&page=1) closed end lugnuts. Will the bolts that come with spacers work with these closed lugnuts or do I have to go with open extended lugnuts.
Those closed lug nuts look like they have to be used with a stud conversion. If you are just doing normal 10mm+ spacers, simply use the black bolts that are provided with the spacers since they are longer than stock ones to accomodate the spacers. If you are going to go with a lug conversion, I'd play it safe and use normal nuts to go over the stud just to be safe. This is one area I don't like to mess around with because a a wheel that's not bolted down on all the threads could lead to a pretty disastrous result.
Appreciate 0