Downpipes install near Charlotte NC

MrMushu · 05-03-2014, 11:23 AM

Looking for someone who has done downpipe installs.

I don't have the time to drive to my dad's shop in Winston Salem to install them because of work and a vacation coming up in June.

07' 335i sedan. 3" macht schnell cat less downpipes

james008 · 05-03-2014, 10:44 PM

I did it on mine in the garage. But I have the 2.5 inch so they were probably a little easier to work with. I would dread doing it again but also dread paying $400+ to have someone else do it.

It is possible to do at home DIY with just jack stands but not a fun one and plan for a hole day.

I am all for helping a fellow member but that project it so time consuming.

MrMushu · 05-04-2014, 08:23 AM

Thanks James! They shouldn't be impossible to do in my garage. I don't have a problem doing it myself... I seriously just don't have the time right now and none in the foreseeable future either.

I have a lift to use but it's an hour away and again I can't fit it into my schedule. Work is hectic this time of year... 70+ hours a week leaves no time to tinker with it lol

TrekNC · 05-05-2014, 10:12 AM

http://www.bchimports.com/

704-681-1582

BCH installed mine and did an excellent job.

MrMushu · 05-05-2014, 03:00 PM

Just called them... how much did they charge you?

Guy just told me $650!! Just wondering if he charged you the same?? And if so, did he at least gave you a reach around while the screwed you?!

That's preposterous!! That job calls for 2.5 hours labor... I'll install downpipes all day every day for $650 a pop!!

sagarjp1 · 05-05-2014, 05:08 PM

-Try Speedstyles, reasonably priced

1000 Van Buren Ave, Indian Trail, NC 28079
(704) 882-0333

Going to install my coilovers by them when they come in.

james008 · 05-05-2014, 10:47 PM

I know the owner of that place nice guy named Blake. Not sure they can do down pipes. Eurowise will do them. Priced around $400 I think.

MrMushu · 05-06-2014, 09:53 AM

Found a place off of south blvd that quoted me $200 and they'd have them done in a couple hours.

TrekNC · 05-06-2014, 01:43 PM

I didn't pay $650, but I paid more than $200. PM me the name of the shop on South Blvd and let me know how it works out for you.

By the way, GMP Performance quoted $800 - $1,000 for installing the downpipes.

MrMushu · 05-06-2014, 09:33 PM

Trek... I'm getting them installed after I take it to the dealership in a week or so.

I'll pm you and let you know how it turns out

B8bydesign · 05-07-2014, 01:38 PM

Quote:

Originally Posted by james008

I know the owner of that place nice guy named Blake. Not sure they can do down pipes. Eurowise will do them. Priced around $400 I think.

Another big +1 for Eurowise. They didn't install my DP's on my S4, but they did remove them. Were honest and upfront about the pricing and time beforehand, ended up being even cheaper than quoted.

Quote:

Originally Posted by TrekNC

By the way, GMP Performance quoted $800 - $1,000 for installing the downpipes.

That sounds about right

MrMushu · 05-08-2014, 09:05 AM

Lol @ James...

Bro, if people are actually paying $650 to $1000 for installing downpipes I'm in the wrong line of work!

Eurowise quoted $400, but that's still insane to pay that much when the job calls for 2.5 hours labor. That's $160/hr labor! Stealer ships don't charge that much! Lol

james008 · 05-08-2014, 11:56 AM

I never paid $650 for downpipe install, I did them myself... but I do trust Eurowise to do work over any dealership. Last time I went to the dealership (for a free recall) the next day my dash lite up like a Christmas tree. I will never go to the dealership again.

$200 is well worth it. To get the pipes lined up correctly it's a job that could take 1.5 hours or it could take 4 hours just depends on your luck.

Quote:

Originally Posted by MrMushu

Lol @ James...

Bro, if people are actually paying $650 to $1000 for installing downpipes I'm in the wrong line of work!

Eurowise quoted $400, but that's still insane to pay that much when the job calls for 2.5 hours labor. That's $160/hr labor! Stealer ships don't charge that much! Lol

Mr.Mastashake · 05-10-2014, 03:37 PM

I did mine in my complex parkin lot, 3" VRSF catless.. It's not crazy hard, jus a bitch if things are rusted/seized up.. I could do em, but it'd have to be soon tho

shauns4 · 05-16-2014, 10:21 PM

You could also check with euroenvy in concord.

EASTCOASTNINJA · 06-01-2014, 10:26 AM

im in hope mills NC and i can do them for $200 prob 3 hours

JuliaN26 · 07-14-2024, 04:23 PM

For anybody looking for a more recent answer, Uerowise qouted me 742 for install of the downpipe and O2 spacer.

05-03-2014, 11:23 AM	#1
MrMushu Private First Class 22 Rep 104 Posts Drives: 07' 335i sedan Join Date: Mar 2014 Location: NC iTrader: (0)	Downpipes install near Charlotte NC Looking for someone who has done downpipe installs. I don't have the time to drive to my dad's shop in Winston Salem to install them because of work and a vacation coming up in June. 07' 335i sedan. 3" macht schnell cat less downpipes
	Appreciate 0 Tweet Quote

05-03-2014, 10:44 PM	#2
james008 Captain 85 Rep 885 Posts Drives: AW 09 335i Join Date: Jul 2012 Location: Charlotte iTrader: (7)	I did it on mine in the garage. But I have the 2.5 inch so they were probably a little easier to work with. I would dread doing it again but also dread paying $400+ to have someone else do it. It is possible to do at home DIY with just jack stands but not a fun one and plan for a hole day. I am all for helping a fellow member but that project it so time consuming. __________________
	Appreciate 0 Quote

05-04-2014, 08:23 AM	#3
MrMushu Private First Class 22 Rep 104 Posts Drives: 07' 335i sedan Join Date: Mar 2014 Location: NC iTrader: (0)	Thanks James! They shouldn't be impossible to do in my garage. I don't have a problem doing it myself... I seriously just don't have the time right now and none in the foreseeable future either. I have a lift to use but it's an hour away and again I can't fit it into my schedule. Work is hectic this time of year... 70+ hours a week leaves no time to tinker with it lol
	Appreciate 0 Quote

05-05-2014, 10:12 AM	#4
TrekNC New Member 1 Rep 6 Posts Drives: 2007 335i Join Date: Feb 2013 Location: United States iTrader: (0)	BCH http://www.bchimports.com/ 704-681-1582 BCH installed mine and did an excellent job.
	Appreciate 0 Quote

05-05-2014, 03:00 PM	#5
MrMushu Private First Class 22 Rep 104 Posts Drives: 07' 335i sedan Join Date: Mar 2014 Location: NC iTrader: (0)	Just called them... how much did they charge you? Guy just told me $650!! Just wondering if he charged you the same?? And if so, did he at least gave you a reach around while the screwed you?! That's preposterous!! That job calls for 2.5 hours labor... I'll install downpipes all day every day for $650 a pop!! Last edited by MrMushu; 05-05-2014 at 05:11 PM..
	Appreciate 0 Quote

05-05-2014, 05:08 PM	#6
sagarjp1 Enlisted Member 7 Rep 43 Posts Drives: 09 e92 BMW 335i Join Date: Jul 2013 Location: Charlotte, NC iTrader: (1)	-Try Speedstyles, reasonably priced 1000 Van Buren Ave, Indian Trail, NC 28079 (704) 882-0333 Going to install my coilovers by them when they come in.
	Appreciate 0 Quote

05-05-2014, 10:47 PM	#7
james008 Captain 85 Rep 885 Posts Drives: AW 09 335i Join Date: Jul 2012 Location: Charlotte iTrader: (7)	I know the owner of that place nice guy named Blake. Not sure they can do down pipes. Eurowise will do them. Priced around $400 I think.
	Appreciate 0 Quote

05-06-2014, 09:53 AM	#8
MrMushu Private First Class 22 Rep 104 Posts Drives: 07' 335i sedan Join Date: Mar 2014 Location: NC iTrader: (0)	Found a place off of south blvd that quoted me $200 and they'd have them done in a couple hours.
	Appreciate 0 Quote

05-06-2014, 01:43 PM	#9
TrekNC New Member 1 Rep 6 Posts Drives: 2007 335i Join Date: Feb 2013 Location: United States iTrader: (0)	I didn't pay $650, but I paid more than $200. PM me the name of the shop on South Blvd and let me know how it works out for you. By the way, GMP Performance quoted $800 - $1,000 for installing the downpipes.
	Appreciate 0 Quote

05-06-2014, 09:33 PM	#10
MrMushu Private First Class 22 Rep 104 Posts Drives: 07' 335i sedan Join Date: Mar 2014 Location: NC iTrader: (0)	Trek... I'm getting them installed after I take it to the dealership in a week or so. I'll pm you and let you know how it turns out
	Appreciate 0 Quote

05-08-2014, 09:05 AM	#12
MrMushu Private First Class 22 Rep 104 Posts Drives: 07' 335i sedan Join Date: Mar 2014 Location: NC iTrader: (0)	Lol @ James... Bro, if people are actually paying $650 to $1000 for installing downpipes I'm in the wrong line of work! Eurowise quoted $400, but that's still insane to pay that much when the job calls for 2.5 hours labor. That's $160/hr labor! Stealer ships don't charge that much! Lol
	Appreciate 0 Quote

05-10-2014, 03:37 PM	#14
Mr.Mastashake Private First Class 7 Rep 141 Posts Drives: 07 335i Join Date: Oct 2013 Location: Charlotte, NC iTrader: (0)	I did mine in my complex parkin lot, 3" VRSF catless.. It's not crazy hard, jus a bitch if things are rusted/seized up.. I could do em, but it'd have to be soon tho __________________ 2007 BMW 335i- stockish for now.. ZHP shifter, VRSF DPs, JB4.. 2009 Chevy Cobalt SS- bolt-ons, 18/26psi tune: Easy M3 Killer [SOLD]
	Appreciate 0 Quote

05-16-2014, 10:21 PM	#15
shauns4 New Member 2 Rep 23 Posts Drives: 2011 335i xdrive Join Date: Apr 2014 Location: concord, nc iTrader: (1)	You could also check with euroenvy in concord.
	Appreciate 0 Quote

06-01-2014, 10:26 AM	#16
EASTCOASTNINJA WILL 32 Rep 496 Posts Drives: 2008 Alpine White 335i Sedan Join Date: Jan 2012 Location: Fayetteville, NC iTrader: (1)	im in hope mills NC and i can do them for $200 prob 3 hours
	Appreciate 0 Quote

07-14-2024, 04:23 PM	#17
JuliaN26 Registered 0 Rep 2 Posts Drives: 2016 328i SULEV Join Date: Jul 2024 Location: Charlotte iTrader: (0)	For anybody looking for a more recent answer, Uerowise qouted me 742 for install of the downpipe and O2 spacer.
	Appreciate 0 Quote