» MORR Wheels | Introducing the MultiForged™ 3PC Concave Collection - BMW 3-Series (E90 E92) Forum

MORRWheels · 07-11-2011, 05:56 PM

In 2008, the R&D team at MORR looked into creating a multi-piece wheel program, but was not satisfied with what was being offered at the time. So, in true MORR fashion, the engineering and product development team set out to make a 2pc and 3pc line-up worthy of carrying the MORR name. Their had to be a better option to combine the flexibility of multi-piece wheels with the craftsmanship, engineering, attention to detail, and performance-minded pedigree that is MORR.

Enter the MORR MultiForged™ Collection.

MORR MultiForged™ is MORR’s answer to a far behind 3pc market that has remained stagnant in many aspects of wheel manufacturing technologies. The MORR MultiForged™ collection is as different as it can get when it comes to 3pc wheels. Assembly of a MultiForged™ wheel takes 3 hours per wheel, the back-pad is engineered with torque-assisted mounting and Anti-Water rain grooves for water retention prevention, to virtually eliminate any and all possible vibration issues that can occur. Furthermore, all MultiForged™ wheels receive a low curing anti-corrosion powdercoat on both the outside and inside barrels for additional corrosion resistance and cosmetic appearance. Lastly, through of the use of proprietary assembly components and techniques we are able to torque our assembly bolts close to 2.5 times more than the traditional multi-piece wheels, providing a structure that is much more resistant to load. Our fasteners are stronger, lighter, and much more resistant to corrosion when compared to the zinc fasteners most companies use. Titanium Fasteners are also available.

Additionally, MORR uses a proprietary silicone sealant that was co-developed with 3M to seal the inner and outer parts. This sealant is specifically designed for modular wheels making, and it is preferable for heat resistance, temperature changes, corrosion, humidity and more. Lastly, every wheel is assembled and torqued by hand for utmost care. Aside from all of these features, the MORR MultiForged™ collection includes standard features that are only offered as “optional” features by most. These standard features include but are not limited to:

Race-Prep Precision Machining
BackPad Precision Pocketing
Side-Spoke Precision Pocketing
Powdercoated Inner & Outer Barrels

All of this precise additional machining adds significant manufacturing cost, but dramatically reduces the weight of the wheel. We are able keep our weight targets to a minimum, while still maintain all of our strength and structural integrity criteria when subjected to FEA Analysis, DOT SAE-J2530 testing, and VIA/JWL Testing and registration.

MultiForged™ is a 3PC Concave product line, that unlike anyone else, uses FORGED 6061-T6 inners, outters AND centers – no extruded, cast, or rolled aluminum in 5000 series to be found anywhere. They are custom made to order, in any finish, offset, or width desired from 19” – 22”.

Right now, the MultiForged™ collection is available in two introductory styles: the MS8 (7-spoke mesh concave 3PC) and the MS10 (10-spoke radial concave 3PC). Our MultiForged™ collection represents the most elite 3PC product on the market, taking us 3-years to fully develop. Anybody can make a 3PC nowadays, but very few, if any, do it right. MORR does it right – on a completely new level.

MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave)
*Brushed & Cleared Centers w/ Polished Lip and Silver barrels

MORRWheels · 07-11-2011, 05:57 PM

MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave)
*Brushed Titanium Centers w/ Brushed Titanium Lips and Gunmetal barrels

MORR MultiForged™ MS10 (10-spoke Radial 3pc Concave)
*Gunmetal Centers w/ Brushed Titanium Lips and Gunmetal barrels

MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave)
*Texture Gunmetal Centers w/ Gloss Black Lips, Gloss Black Barrels, and (1) Front wheel side-spoke pocket painted Brembo Yellow:

- The Boys @ MORR

OwnAge · 07-11-2011, 06:03 PM

hoT!

francisomar · 07-11-2011, 06:38 PM

EVO_S4 · 07-11-2011, 06:44 PM

nice no doubts, but a common design with a nice concave. Bring back the classic VS7!!!

TSM330i · 07-11-2011, 07:02 PM

VERY sharp!

Weights?

Chico · 07-11-2011, 07:51 PM

You guys already know how I feel about the MS8.

This is my next set on the new ride.

Park828 · 07-11-2011, 08:16 PM

price?

Rich@GTBPerformance · 07-11-2011, 10:55 PM

Woohoo! They have arrived!

BKap08 · 07-12-2011, 12:55 AM

MS 10

CRT3 · 07-12-2011, 01:59 AM

Quote:

Originally Posted by BKap08

MS 10

+ 1 please someone buy these! i would love to see them on a black e92

EVO_S4 · 07-12-2011, 03:37 AM

Quote:

Originally Posted by Park828

price?

Qoute from a vendor m3post msrp $1900 a wheel for 19"

Andy@MORR · 07-12-2011, 10:35 AM

Quote:

Originally Posted by OwnAge

hoT!

Thank you!!!

Quote:

Originally Posted by francisomar

they're something else, aren't they?!

Quote:

Originally Posted by EVO_S4

nice no doubts, but a common design with a nice concave. Bring back the classic VS7!!!

I wouldn't say common by any means

The intricate details of the design, the attention to detail, and paired with the manufacturing/assembly processes developed specifically for this line in combination with top-notch components NO one else uses, I'd say they are pretty unique

The VS7.2 is in the works as we speak! Can't say too much more, but you're going to be impressed with the weight targets

Quote:

Originally Posted by AW325xi

VERY sharp!

Weights?

Thank you! Figure low-mid 20lbs for 19". They are VERY light for 3PC concave, but naturally our 1pc line-up is lighter

Quote:

Originally Posted by Rich@GTBPerformance

Woohoo! They have arrived!

Quote:

Originally Posted by BKap08

MS 10

Loving that 10-spoke radial!! MS10 on a slammed E9x would be

Quote:

Originally Posted by CRT3

+ 1 please someone buy these! i would love to see them on a black e92

we've got plenty of orders in production right now, so they'll be pictures very shortly! One of them is on a black E93

remmib · 07-12-2011, 11:00 AM

Awesome wheels.

Will the center only be concave?

ACEE · 07-12-2011, 11:37 AM

Quote:

Originally Posted by Park828

price?

Quote:

Originally Posted by EVO_S4

Qoute from a vendor m3post msrp $1900 a wheel for 19"

1900 a wheel???? OMG I hope not. This would be another wheel I could only dream about.

Nice looking wheels though

BKap08 · 07-12-2011, 11:03 PM

Quote:

Originally Posted by CRT3

+ 1 please someone buy these! i would love to see them on a black e92

Or an LCI e90. The wheel looks amazing and I've been trying to imagine what it would look like on my car haha

triggz · 07-13-2011, 08:56 AM

i think he meant $1900 for 4 wheels

cuban335i · 07-13-2011, 09:26 AM

Quote:

Originally Posted by triggz

i think he meant $1900 for 4 wheels

lmao for 4 wheels?

I say somewhere between 1250-1750 a wheel. Their price point has to be lower than ADV.1 Track specs, as they are not as well known and ADV.1 has been doing this a while now. (FYI - ADV.1 track specs are around $1950 a wheel with no paint extras or race prep)

SpmnE9zero · 07-13-2011, 09:31 AM

Quote:

Originally Posted by triggz

i think he meant $1900 for 4 wheels

hahah not too sure about this.... better re-think your thought process if I had to guess.
If you guys want a price, just pm them, they will get back to you.

shockin330i · 07-13-2011, 09:42 AM

Hhmm, I'd rock these...

cuban335i · 07-13-2011, 10:03 AM

MORR I have a suggestion for you. I think you should make some higher quality center caps. Your's look like stickers. Get something like ADV.1 or at least something a little more high class like HRE or DPE where it is engraved on a little piece of metal and glued on to a plain center cap. Your's make the wheels look much cheaper imo.

Carlos@MORR · 07-13-2011, 12:36 PM

Quote:

Originally Posted by remmib

Awesome wheels.

Will the center only be concave?

What do you mean?

Quote:

Originally Posted by ACEE

1900 a wheel???? OMG I hope not. This would be another wheel I could only dream about.

Nice looking wheels though

Thank you!

Quote:

Originally Posted by SpmnE9zero

hahah not too sure about this.... better re-think your thought process if I had to guess.
If you guys want a price, just pm them, they will get back to you.

+ 1

Quote:

Originally Posted by shockin330i

Hhmm, I'd rock these...

Thanks. Congratulations on the promotion. Nice to have a knowledgable moderator on the N55 forums.

07-11-2011, 05:56 PM	#1
MORRWheels Drives: BMWs Join Date: Sep 2005 Location: USA Posts: 1,527 iTrader: (1)	» MORR Wheels \| Introducing the MultiForged™ 3PC Concave Collection In 2008, the R&D team at MORR looked into creating a multi-piece wheel program, but was not satisfied with what was being offered at the time. So, in true MORR fashion, the engineering and product development team set out to make a 2pc and 3pc line-up worthy of carrying the MORR name. Their had to be a better option to combine the flexibility of multi-piece wheels with the craftsmanship, engineering, attention to detail, and performance-minded pedigree that is MORR. Enter the MORR MultiForged™ Collection. MORR MultiForged™ is MORR’s answer to a far behind 3pc market that has remained stagnant in many aspects of wheel manufacturing technologies. The MORR MultiForged™ collection is as different as it can get when it comes to 3pc wheels. Assembly of a MultiForged™ wheel takes 3 hours per wheel, the back-pad is engineered with torque-assisted mounting and Anti-Water rain grooves for water retention prevention, to virtually eliminate any and all possible vibration issues that can occur. Furthermore, all MultiForged™ wheels receive a low curing anti-corrosion powdercoat on both the outside and inside barrels for additional corrosion resistance and cosmetic appearance. Lastly, through of the use of proprietary assembly components and techniques we are able to torque our assembly bolts close to 2.5 times more than the traditional multi-piece wheels, providing a structure that is much more resistant to load. Our fasteners are stronger, lighter, and much more resistant to corrosion when compared to the zinc fasteners most companies use. Titanium Fasteners are also available. Additionally, MORR uses a proprietary silicone sealant that was co-developed with 3M to seal the inner and outer parts. This sealant is specifically designed for modular wheels making, and it is preferable for heat resistance, temperature changes, corrosion, humidity and more. Lastly, every wheel is assembled and torqued by hand for utmost care. Aside from all of these features, the MORR MultiForged™ collection includes standard features that are only offered as “optional” features by most. These standard features include but are not limited to: Race-Prep Precision Machining BackPad Precision Pocketing Side-Spoke Precision Pocketing Powdercoated Inner & Outer Barrels All of this precise additional machining adds significant manufacturing cost, but dramatically reduces the weight of the wheel. We are able keep our weight targets to a minimum, while still maintain all of our strength and structural integrity criteria when subjected to FEA Analysis, DOT SAE-J2530 testing, and VIA/JWL Testing and registration. MultiForged™ is a 3PC Concave product line, that unlike anyone else, uses FORGED 6061-T6 inners, outters AND centers – no extruded, cast, or rolled aluminum in 5000 series to be found anywhere. They are custom made to order, in any finish, offset, or width desired from 19” – 22”. Right now, the MultiForged™ collection is available in two introductory styles: the MS8 (7-spoke mesh concave 3PC) and the MS10 (10-spoke radial concave 3PC). Our MultiForged™ collection represents the most elite 3PC product on the market, taking us 3-years to fully develop. Anybody can make a 3PC nowadays, but very few, if any, do it right. MORR does it right – on a completely new level. MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave) Brushed & Cleared Centers w/ Polished Lip and Silver barrels __________________ Web:* MORRWheels.com \| Email: Sales@MORRWheels.com \| Toll Free: 877.947.6677 \| Fax: 877-408-7982 THE INDUSTRY'S BEST KEPT SECRET Last edited by MORRWheels; 07-18-2011 at 12:14 PM.
	Tweet

07-11-2011, 05:57 PM	#2
MORRWheels Drives: BMWs Join Date: Sep 2005 Location: USA Posts: 1,527 iTrader: (1)	MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave) Brushed Titanium Centers w/ Brushed Titanium Lips and Gunmetal barrels MORR MultiForged™ MS10 (10-spoke Radial 3pc Concave) Gunmetal Centers w/ Brushed Titanium Lips and Gunmetal barrels MORR MultiForged™ MS8 (7-spoke Mesh 3pc Concave) Texture Gunmetal Centers w/ Gloss Black Lips, Gloss Black Barrels, and (1) Front wheel side-spoke pocket painted Brembo Yellow: - The Boys @ MORR __________________ Web:* MORRWheels.com \| Email: Sales@MORRWheels.com \| Toll Free: 877.947.6677 \| Fax: 877-408-7982 THE INDUSTRY'S BEST KEPT SECRET Last edited by MORRWheels; 10-11-2011 at 05:31 PM.

07-11-2011, 06:03 PM	#3
OwnAge Brigadier General Drives: LCI 328i Join Date: Mar 2007 Location: Toronto. Newmarket. Posts: 4,149 iTrader: (1) Garage List 2009 328i [4.49]	hoT! __________________ 20% Tint All around \| Matte Black Grills \| Painted Reflectors \| M-Tech Shifter/Hand brake lever \| 3000k HID Fogs \| Mtech 3300 AE \| Alufelgen CS7 19" F 8.5, R 9.5 ET30 \| ContiSport, F 235/R 275 \| H&R Sport Springs \| CF Perf. T.1 Trunk Spoiler \| CF BMW Perf. Splitters \| BMW Perf. Exhaust \| iPhone4 Doc \| PBX \| K&E Filter/Charcoal Delete

07-11-2011, 06:44 PM	#5
EVO_S4 Colonel Drives: 2012 Golf R Join Date: Apr 2005 Location: TN Posts: 2,204 iTrader: (28) Garage List 2009 BMW [4.12]	nice no doubts, but a common design with a nice concave. Bring back the classic VS7!!! __________________ 2013 Lexus RX350 F-Sport 2012 VW Golf R

07-11-2011, 07:02 PM	#6
TSM330i 2006 330i, TSM, Black, manual, sport Drives: E90 330i, E86 Z4 3.0si Join Date: Nov 2005 Location: Chester Springs, PA Posts: 2,627 iTrader: (1)	VERY sharp! Weights? __________________ 2006 330i, TSM, Black, Sport, JIC Cross Coil-Overs, UUC Sways, 18" Advan RS, Mich PSS 255/265, Custom Alcantara M-tech steering wheel, VAC pedals, Rogue shifter, M-Tech front, CF emblems, Dinan TB, Intake, exhaust, strut bar, Stoptech BBK, LSD, M3 susp., LUX 5, CF Hood and CSL, Sparco Seats, AA tune, CF Roof

07-11-2011, 06:38 PM	#4
francisomar First Lieutenant Drives: 2008 335i coupe jb Join Date: Feb 2010 Location: Yauco, PR Posts: 327 iTrader: (0)

07-11-2011, 07:51 PM	#7
Chico Captain Drives: 2011 E90 335i LCI Msport Join Date: Nov 2005 Location: EST Posts: 621 iTrader: (2)	You guys already know how I feel about the MS8. This is my next set on the new ride.

07-11-2011, 08:16 PM	#8
Park828 Lieutenant Drives: f10 535i msprt e60 550i msprt Join Date: Feb 2007 Location: San Jose CA Posts: 542 iTrader: (2)	price? __________________ 2011 F10 535i 07 e90 AW Terra Manual, Brushed Aluminium, ZCW, ZPP, ZSP, comfort access, power rear shades, manual side windows shades, PDC, NAV, HD radio, Sirius, 6FL Ipod, 6UH RTTI 97 e36 techno v M3 coupe manual

07-11-2011, 10:55 PM	#9
Rich@GTBPerformance BimmerPost Supporting Vendor Drives: A hard bargain Join Date: Dec 2010 Location: Northern NJ Posts: 6,423 iTrader: (4)	Woohoo! They have arrived! __________________ Your Home For Premium BMW Aftermarket Parts www.gtbperformance.com \| sales@gtbperformance.com \| Facebook \| 973 429 2839

07-12-2011, 12:55 AM	#10
BKap08 Colonel Drives: LCI Join Date: Mar 2011 Location: 408 Posts: 2,261 iTrader: (0)	MS 10

07-12-2011, 11:00 AM	#14
remmib General Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway Posts: 24,667 iTrader: (0)	Awesome wheels. Will the center only be concave? __________________ F10 520d M-Sport Alpine White \| KW V3 Coilover \| 3D Design Front Lip \| BMW M Performance Black Grills \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser\|

07-13-2011, 08:56 AM	#17
triggz Major Drives: E92 335i Join Date: Jun 2010 Location: Toronto Posts: 1,067 iTrader: (2)	i think he meant $1900 for 4 wheels __________________ FBO+Meth+G5 ISO

07-13-2011, 09:42 AM	#20
shockin330i Brigadier General Drives: blue Join Date: Jan 2007 Location: f y'all, I'm from Texas (RGV) Posts: 4,208 iTrader: (1)	Hhmm, I'd rock these... __________________ ERnie 2011 AW/e90/n55 12.9@107.53mph *N55 Moderator* I'm crawling similar to a ant cuz I'm low to the earth

07-13-2011, 10:03 AM	#21
cuban335i Brigadier General Drives: '12 M3/'09 e92 335i/'11 MCS Join Date: Feb 2009 Location: central NJ Posts: 3,546 iTrader: (18)	MORR I have a suggestion for you. I think you should make some higher quality center caps. Your's look like stickers. Get something like ADV.1 or at least something a little more high class like HRE or DPE where it is engraved on a little piece of metal and glued on to a plain center cap. Your's make the wheels look much cheaper imo. __________________ '12 e92 M3 Melbourne Red/Bamboo - ADV.1 ADV10, Volk TE37SL, OSS, Innotech F1, Arkym, iND '09 e92 335i Alpine White/Saddle Brown - fully modded

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search