Index of E90 DIY / E92 DIY / E93 DIY here!

Index of E90 DIY / E92 DIY / E93 DIY here!
Mark
06-29-2005

Exterior

Body Colour Finisher Rods (by nexus66)

Click here to read the entire tutorial

#22

By raceing86 on 12-29-2009, 07:00 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

Reset the spark plug service light

Just wondering if anyone had the instructions on how to reset the spark plug service light. I thought it use to be here in the DIY but I can't find it.

#23

By dgrott328 on 04-25-2010, 01:34 AM

http://www.e90post.com/forums/showthread.php?t=378914
Add this. It is vinyl matte black reflectors

#24

By J-Sin on 06-19-2010, 04:53 AM

I was wondering if anyone has a DIY for wiring some Cold Cathodes for ambient footwell lighting. I had done it previously in my 09' VW Jetta but I'm curious on how to do it for a 2011 328i E90.

#25

By Diesel///M on 08-05-2010, 03:37 PM

any diy for removing rear bumper?

#26

By pilly on 10-09-2010, 05:59 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

diy for removing the led in the doorhandles

Like it says in the title does anyone have a diy for removing the led in the doorhandles ?

thx in advance

#27

By Castel on 10-11-2010, 04:29 AM

New DIY created! MTech E92 front Bumper retrofit guide. Can it be added to the index?

http://www.e90post.com/forums/showthread.php?p=8140019

#28

By focusse on 11-25-2010, 08:04 AM

Hi !!

I have a front speaker problem the one in the Middle of the car !!! When i listen to loud music it keeps just farting any help with that ?? How can i change that speaker for a new one ?? Is there diy ?? Thanks

#29

By Eddie_1990 on 12-11-2010, 03:51 AM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

Thank you for this excllent sticky thread. ITS AMAZING !!!

#30

By PersianPete on 01-14-2011, 12:29 AM

Brake Pad Replacement - REAR

http://www.e90post.com/forums/showthread.php?t=473763

=]

#31

By thewallaby on 02-01-2011, 05:12 AM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

Anyone has installed trailer hook rear support beam and cables to that? Was it easy? Is it possible to bypass the programming or its needed for the correct function of the signals?
Any answers are much appreciated.

#32

By tsuma on 02-01-2011, 08:36 AM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

You mean a trailer hitch receiver? Have you searched this thread?

You can put on a 1 1/4" one only, seen in this DIY.
http://www.e90post.com/forums/showthread.php?t=57786

The electrical is a piece of cake since the battery is in the trunk, no reprogramming needed with this kit:
http://accessories.etrailer.com/search?w=119176
No drilling needed.

#33

By orionredwing on 02-07-2011, 08:55 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

DIY - Replacing Camshaft VANOS Solenoid
http://www.e90post.com/forums/showthread.php?t=486201

#34

By QLD on 03-12-2011, 08:04 AM

Member reviews
Difficulty [ 1 = Difficult ]		5
Cost [ 1 = Expensive ]		5
DIY Clarity [ 1 = Not clear ]		5
Average 100%

New DIY Grille replacement for 2011 LCI E92's...

Pictorial PDF - please add to index...thx

http://www.e90post.com/forums/showthread.php?t=500394

#35

By Vesar on 05-10-2011, 07:13 AM

Installation of Angel Eyes GP Thunder:
http://www.e90post.com/forums/showthread.php?t=528173

#36

By boom on 05-14-2011, 07:00 AM

Please add this for DIY oil cooler.
http://www.e90post.com/forums/showthread.php?t=525795

#37

By pez on 07-21-2011, 01:43 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

Hi guys

cant find a DIY on spark plug/coil replacements.

any ideas.

thanks

Pez

#38

By LocDawgg on 08-21-2011, 03:30 PM

Anyone have a diagram or even a DIY for changing your belts? Driver or A/C

#39

By jomegared on 09-17-2011, 12:03 AM

What's up everyone, does anyone know where I can find a DIY for the V/C gasket on a 330i?

#40

By gizmo335i on 09-28-2011, 11:52 AM

subscribed

#41

By AdVERS on 10-11-2011, 01:17 PM

This should be added to the list....A front and Rear PDC DIY
http://www.m3post.com/forums/showthread.php?p=10345624

#42

By tylerdurdon on 10-11-2011, 11:48 PM

Just a question, but that homelink mirror DIY was better then the one I created a few months ago? (http://www.e90post.com/forums/showthread.php?t=450516)

#43

By USAF Rick on 10-26-2011, 02:23 PM

Member reviews
Difficulty [ 1 = Difficult ]		1
Cost [ 1 = Expensive ]		1
DIY Clarity [ 1 = Not clear ]		1
Average 20%

Awesome thread.

Tutorial Tools	Search this Tutorial
Show Printable Version Email this Page	Search this Tutorial: Advanced Search