MTEC HID Fogs... Error Code SOLVED! - Page 2 - BMW 3-Series (E90 E92) Forum

AH · 06-05-2007, 04:32 AM

Dankim, do the dealer charge you for the reset?

Dankim10 · 06-05-2007, 05:28 AM

free cuz I know the boss!

alex310 · 06-06-2007, 12:34 AM

Okay guys, figured out the problem, I used one 50 watt LED Load Equalizer from "http://superlumination.com/" on each side fog light. Just finished doing the full install, no ERRORS, remember if you do install these, plug mount them on METAL, they got as hot as a light bulb and will burn anything they touch.

Here is my 8000K set up half finished...

calvino · 06-06-2007, 04:22 PM

alex310 they sell 2 50w with one you got ?? the 6ohm or the 3 ohm ???

thanks

alex310 · 06-07-2007, 03:33 AM

Quote:

Originally Posted by calvino

alex310 they sell 2 50w with one you got ?? the 6ohm or the 3 ohm ???

thanks

Sorry...6ohm.

Kev · 06-12-2007, 08:37 AM

Quote:

Originally Posted by alex310

Sorry...6ohm.

Can you post pictures of how the load equalizer should be hooked up with the HID wiring harness? Thank you!

3thirty5 · 06-12-2007, 12:19 PM

Quote:

Originally Posted by Kev

Can you post pictures of how the load equalizer should be hooked up with the HID wiring harness? Thank you!

yes that would really help. I'm really interested in doing this now! finally a way to have HID fogs without the error message!

alex310 · 06-12-2007, 09:43 PM

Quote:

Originally Posted by Kev

Can you post pictures of how the load equalizer should be hooked up with the HID wiring harness? Thank you!

Quote:

Originally Posted by 3thirty5

yes that would really help. I'm really interested in doing this now! finally a way to have HID fogs without the error message!

I wish I could, but it is a PITA trying to remove everything to take pictures. It is very simple. Any end of the Load EQ must tap into the + Power of the wire harness of the fog lights on the car, then ground the other end to a ground, then the Load EQ must be mounted away from any plastic, mines for example are mounted all the way ontop of the engine bay. Here is a picture of where I mounted the Load EQ's for the Clear Corner Signal Mod...

06-05-2007, 04:32 AM	#23
AH Major Drives: E90 320i Join Date: Nov 2006 Location: Indonesia Posts: 1,165 iTrader: (0) Garage List 2006 E90 [0.00]	Dankim, do the dealer charge you for the reset? __________________ Mods: Remus, Blacklines, Hartge, ACS, Breyton, Eibach, 20" Lative

06-05-2007, 05:28 AM	#24
Dankim10 Major Drives: E90 325i AW Join Date: Sep 2005 Location: Indonesia - Bogor Posts: 1,200 iTrader: (6) Garage List 2006 325i [0.00]	free cuz I know the boss! __________________ Blackline \| Euro Xenon Headlight \| Brex white ring \| Breyton spoiler \| ACS roof spoiler \| 19" HRE C20 19x8.5, 19x9.5, with Michellin PS2 tires \| Authentic GruppeM intake \| Authentic M-technik full kits \| 3D Studie front Lip \| Hamann Quad Exhaust \| Hamann Mtech rear Diffuser \| Piaa HID kit for foglight \| KW Street comfort suspension

06-06-2007, 04:22 PM	#26
calvino Lieutenant Colonel Drives: had e90, 330i mystic blue Join Date: May 2006 Location: Weston,Florida Posts: 1,926 iTrader: (4) Garage List 2006 e90 330i [0.00]	alex310 they sell 2 50w with one you got ?? the 6ohm or the 3 ohm ??? thanks __________________ E90 Mytic Blue 330i 07-20-2006. 05-17-2011 Doesn't the idea of making nature against the law seem to you a bit . . . unnatural? Support NORML

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-06-2007, 12:34 AM	#25
alex310 Lieutenant Drives: 335I Coupe/M3 Sedan Join Date: Mar 2007 Location: West Los Angeles/Westwood Posts: 544 iTrader: (3)	Okay guys, figured out the problem, I used one 50 watt LED Load Equalizer from "http://superlumination.com/" on each side fog light. Just finished doing the full install, no ERRORS, remember if you do install these, plug mount them on METAL, they got as hot as a light bulb and will burn anything they touch. Here is my 8000K set up half finished...