[Syndicategt]

Originally Posted by hotrod182

Be careful, meth addictions can become fairly expensive!

HR - now you have a serious addiction "Hi, my name is Hotrod and I'm an addict"

[ar design]

I love nitrous

[venom3469]

I wanna jump on the NOS train! To bad I want to do more bolt ons first though! Again looks great, but whenever and if I do NOS. I'll have to do a 50 shot at lest. Haha

[cn555ic]

Originally Posted by venom3469

I wanna jump on the NOS train! To bad I want to do more bolt ons first though! Again looks great, but whenever and if I do NOS. I'll have to do a 50 shot at lest. Haha

50 shot is a pretty big jump in power using a .31 and higher jet I think. You would need to be careful as these levels are asking for trouble if not monitored right. Also this large of a shot is not a daily usage like my setup in which one flip of a button and I have 25 extra at my disposal. I honestly think that my setup will become more appealing to daily drivers that don't drag their cars and want to spray nitrous safely

[venom3469]

Originally Posted by cn555ic

50 shot is a pretty big jump in power using a .31 and higher jet I think. You would need to be careful as these levels are asking for trouble if not monitored right. Also this large of a shot is not a daily usage like my setup in which one flip of a button and I have 25 extra at my disposal. I honestly think that my setup will become more appealing to daily drivers that don't drag their cars and want to spray nitrous safely

I would probably end up around something you have. It is just the thought of an extra 50 by the push of the button. Also yeah I do plan on this being my daily driver so I might not go that hard. Ill cross that bridge when I get there but still nice set up!

[cn555ic]

Some renegade just sent Terry a log of his nitrous run using a .46 jet! I stand corrected and this is the largest jet so far used with a N54! DAMN that must be fast as hell and also dangerous as hell for a major engine failure...That close to 100 shot and running 18 psi....That is insane in the membrane! Was that you Hotrod?
Damn 11.4

[hotrod182]

Originally Posted by cn555ic

Some renegade just sent Terry a log of his nitrous run using a .46 jet! I stand corrected and this is the largest jet so far used with a N54! DAMN that must be fast as hell and also dangerous as hell for a major engine failure...That close to 100 shot and running 18 psi....That is insane in the membrane! Was that you Hotrod?
Damn 11.4

Yeah, first time running map #6 with nitrous. Had it set at 17psi, and didn't realize the meth additive I set at 50 was on top of the 17psi. So it was targeting 22psi, (although I had the max at 20psi limit). But it did hit 20psi several times, had fuel starvation with 20:1 AFRs. JB4 did its job and cut the nitrous whenever this happened. But I was still running right around 20psi on nitrous for a while before the fuel starvation occured. If that isn't a testament to the strength of this engine, I don't know what is. I am using no CPS offset either. So again, I believe there is so much overraction to little timing drops at much less HP levels. Yes, that 11.4 was at 131.1mph with a 2.0 sec 60' time.

[cn555ic]

Originally Posted by hotrod182

Yeah, first time running map #6 with nitrous. Had it set at 17psi, and didn't realize the meth additive I set at 50 was on top of the 17psi. So it was targeting 22psi, (although I had the max at 20psi limit). But it did hit 20psi several times, had fuel starvation with 20:1 AFRs. JB4 did its job and cut the nitrous whenever this happened. But I was still running right around 20psi on nitrous for a while before the fuel starvation occured. If that isn't a testament to the strength of this engine, I don't know what is. I am using no CPS offset either. So again, I believe there is so much overraction to little timing drops at much less HP levels. Yes, that 11.4 was at 131.1mph with a 2.0 sec 60' time.

Damn thats good to know that your car was strong enough for a .46 jet running 18-20 psi and not even FBO..It gives me a sense of confidence to know what you have experimented with the .46 jet which is a huge shot compared to my
.15 jet that I am running at 16.5 psi with timing throughout the run at 10 and steady and a/f 12.2~ and a bit richer, that I am well within the safety parameters IMO of what this engine can safely handle with nitrous. Your car must have been hailin ass thats for sure. It was strange though that your car ran lean at 20.1 for that split second but could you could have max out the 20 psi of stock turbos limits when you accidentally set it to target 22psi and induce some slight throttle closure? I guess at that point you must of been at peak HP and psi and the meth was not enough to compensate for the extra oxygen if indeed there was no throttle closure. Are you running 2 CM10 nozzles? With a .46 jet I thought you would have beaten your record of 11.33..

[stilov]

Im jumping on the nitrous train soon.

Got my bungs, extra meth stuff for a 2nd injector and my bottle, lines, and solenoid. I am still waiting on my nozzle and jets.

[cn555ic]

Originally Posted by stilov

Im jumping on the nitrous train soon.

Got my bungs, extra meth stuff for a 2nd injector and my bottle, lines, and solenoid. I am still waiting on my nozzle and jets.

It's a very fun install and out of all my mods it was one of the easiest installs but my shift knob took the longest time since it had to be custom fabricated.
What kind of nitrous setup you looking to do. Small shot or you going big? You should also invest in a bottle heater and remote bottle opener and a purge kit because it makes things really user friendly when you have that sudden urge to use the bottle and it's at a flick of buttons within the cabin area and your ready to go. Probably over the top nitrous set for a car spraying such a small shot (lol) but the way I look at it is, if I am doing it might as well do it to its fullest!

[stilov]

Well I am going to do a pressure reg bottle heater...I have used nitrous before. Bottle pressure makes a HUGE difference.

purge kit...I always made do without one.

The remote bottle opener, while convenient, would give me that much more temptation to always hit it!!!! Maybe i'll add one in the future. I got a couple jets, .18, .26 and .34

Gonna start with the .18 (I am going to try and be somewhat conservative, and I have the JB4, so it will integrate similar to Hotrods set-up)

[cn555ic]

Originally Posted by stilov

Well I am going to do a pressure reg bottle heater...I have used nitrous before. Bottle pressure makes a HUGE difference.

purge kit...I always made do without one.

The remote bottle opener, while convenient, would give me that much more temptation to always hit it!!!! Maybe i'll add one in the future. I got a couple jets, .18, .26 and .34

Gonna start with the .18 (I am going to try and be somewhat conservative, and I have the JB4, so it will integrate similar to Hotrods set-up)

Well I guess you know more than me since this is my first time on the bottle.!

I have larger jet sizes for sale if you want. .31 .35 .42. .52 and a .62. Bought them for 4.67. I will take 3 bucks for each one. They are NX jets

[GeorgeSmooth]

Originally Posted by cn555ic

Well I guess you know more than me since this is my first time on the bottle.!

I have larger jet sizes for sale if you want. .31 .35 .42. .52 and a .62. Bought them for 4.67. I will take 3 bucks for each one. They are NX jets

I just bought 30 jets form NX and the jet holder. will post a pic. I think I got carried away though hehe.

[cn555ic]

Originally Posted by GeorgeSmooth

I just bought 30 jets form NX and the jet holder. will post a pic. I think I got carried away though hehe.

30 Jets! I have 9 jets in total

[cn555ic]

Just ordered a digital window switch from NX Express as I didn't feel comfortable spraying through a shift so this will prevent it from ever happening. Module cost $173 bucks Looks to be a cheap item to manufacture, and the profit ratio on this unit IMO is at least 100x but I need it so I have to pay the piper! I will Set the window of 3000 rpm to activate and set the nitrous window to deactivate at 6300 rpms, which should under the rpms of the gear changes in DS mode if I choose to let the car change gears on its own. This module should be pretty easy to install. Sucks that I have to pay for all these fail safes when Shiv promised he would have it for Procede users That never came about. Bummer

http://www.nitrousexpress.com/produc...ils.php?id=640

[R1000K3]

Here is a much better priced RPM switch in a rugged casing. http://www.summitracing.com/parts/SUM-830452/?rtype=1

And another unit that include a RPM switch and pulses the nitrous solenoid at activation to reduce the shock load at activation. http://www.dynotunenitrous.com/store...?idproduct=216

[FrankiE90]

awesome!






"just press the little button, boss.
I'm a professional."

[cn555ic]

Originally Posted by R1000K3

Here is a much better priced RPM switch in a rugged casing. http://www.summitracing.com/parts/SUM-830452/?rtype=1

And another unit that include a RPM switch and pulses the nitrous solenoid at activation to reduce the shock load at activation. http://www.dynotunenitrous.com/store...?idproduct=216

Nice switch for sure! Too late though as I already ordered the switch and its on the way already..plus the pulsing action will probably not benefit me since I am spraying a conservative 25 shot of nitrous but the price is definitely a plus! Thanks for caring!

[cn555ic]

I tapped the rpm signal from pin 21 (rpm signal wire) of the PNP harnass and ran it through to the cabin...All I have to do is hook the ground trigger wire to the ground of the nitrous relay, the rpm wire and the ground for the digital window switch..I only have one wire left which is the red wire for power and I have question.... once the setting is set on the digital window switch, can I hook it up to a on/off switch and will the settings be saved onto the chip? I dont want to run the digital window switch everytime I start the car because the instruction says red wire to 12+....I rather hook it up on my system arming switch which gives it power..Thanks if anyone can answer this question. The unit I am using is the NX digital window switch

[cn555ic]

I called up NX this morning and the settings are hard saved into the module and it doesnt need constant power to have settings to be set again upon giving it power! Nice. I already wired in the switch wire and basically have four wires in the glove box waiting for the window switch to be delivered and then just pop it in!

[SlowerThanU]

Originally Posted by cn555ic

Nope. I am full and don't want to eat! Lol. .15 and no MAS!

Good luck staying with the .15 ... I told myself the same thing ... 6 jets later I am up to .45 in the car now with a .50 in the trunk

[cn555ic]

Originally Posted by SlowerThanU

Good luck staying with the .15 ... I told myself the same thing ... 6 jets later I am up to .45 in the car now with a .50 in the trunk

Stop antagonizing me!

Anyway.....So basically my setup is all control by the ground wire to the nitrous relay...the microswitch, my "go fast button" both have to be pressed and then its up to the digital window switch to give the ground to that wire which is in series with the microswitch and my "go fast" button....WHen rpms are at its trigger point the window switch triggers the ground and then the nitrous will spray its joyful mist into the intake manifold, and you will get some
When the rpms reach the set max rpm, the window switcher takes the ground away and nitrous stops immediately...Pretty simple

The only reason why I would not do a larger jet is that I dont have lean run cutoff and the likihood of this happening with a smaller jet is less