FORUMS
- 5
|
|
![]() |
![]() |
![]() |
|
![]() |
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
![]() |
|
BMW 3-Series (E90 E92) Forum
>
MS-8 integration
|
![]() |
| 01-30-2012, 09:19 PM | #1 |
|
Enlisted Member
![]() |
MS-8 integration
So it is my understanding that the MS-8 only understands 2 subwoofer outputs- those of you that have the 8" "subs" under the seat, AND subs in the trunk.. how did you configure them? Or is this incorrect? I could always pass the trunk subs straight through but would rather use the MS-8 for them as well of possible.
System is: Stock HU DLS 4"+tweets, active (for now, might change my mind and go passive) 8" kicker subs under seat 2- 12" JL subs in trunk. MS-8, JL 900/5 and a 600/6 if I stay active. I have all the equipment, and about to start installing and stumbled into some of these potential MS8 issues. |
|
|
|
| 01-30-2012, 10:01 PM | #2 |
|
Private First Class
![]() |
The "standard" configuration for the D9x is to ditch the rears or run them in parallel with the rear sides, so you have 2 channels on the front mid/highs, 2 channels on the underseats, 2 channels on the rear/sides, one channel for the center, and one channel for the sub. Equals 8 channels.
Maybe go passive between your mids and highs and add a center to make the most of the ms8. |
|
|
|
| 01-30-2012, 10:02 PM | #3 |
|
Colonel
![]() |
The underseats arent normally considered subs. A woofer and a subwoofer are not the same
__________________
WTB: 335is Black Chrome Tips -PM Me
FS:Sub Amp - works w/ Technic harness! MRD-M300 FREE!!: Euro-Amber LCI LED tails (for repair) DON'T BUY FROM RAF555!!!! Ask me why |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | Search this Thread |
|
|