Very first mod for my E92! - Page 2 - BMW 3-Series (E90 E92) Forum

Exzackt · 03-27-2012, 04:20 PM

Quote:

Originally Posted by BimmerCop

Gloss it is guys! Anyone have a link to buy Plasti-Dip plus the gloss for it?

dipyourcar.com

they sell packages of the black and glossifier

Exzackt · 03-27-2012, 04:21 PM

Quote:

Originally Posted by ndog14

I like that PlastiDip. What about wheels? I was watching the videos, if I'm washing my car and go to clean the rims will that stuff come off?

No it only peels off if you intentionally take the edge and peel. Comes off in one clean piece if you do 5-6 layers

I did my reflectors, side markers (light still shows through just the same), window trim, and 335i emblem yesterday. Couldn't be happier with results:

Sorry I don't have more pics with better light

335 oClock · 03-27-2012, 06:43 PM

... here goes 20 grand

Sales@modmy3.com · 03-27-2012, 06:46 PM

congrats on your first mod

now next, wheels, suspensions, tune, leds, and the list is un-ending >.<

djjasper · 03-27-2012, 08:47 PM

Next up.... JB4!!!

sammy_0559 · 03-27-2012, 08:54 PM

Quote:

Originally Posted by djjasper

Next up.... JB4!!!

+1!

psmitty95 · 03-27-2012, 09:19 PM

I love plasti dip and have used it for a ton of stuff however i would go against using it on the trim... I personally have never done it but i've spoken to people that have and they say its nearly impossible to get all the angles like the inside edges. If i were you i'd just

Buy the vinyl here: http://www.bmwshadowline.com/

And follow these instructions: http://www.bmwshadowline.com/images/ShadowlineDIY.pdf

Since i haven't done it yet i don't know how difficult it really is but from the instructions it seems like it's pretty easy and just requires patience.

Also if you go the plasti dip route and use the glossifier you might not like how the gloss turns out. It's still slightly textured like the original matte black plasti dip unfortunately

ndog14 · 03-27-2012, 09:31 PM

Quote:

Originally Posted by Exzackt

No it only peels off if you intentionally take the edge and peel. Comes off in one clean piece if you do 5-6 layers

Sweet. Best $45 rims, ever! Not really, but good alternative till my tires are shoot so I have an excuse for new rims.

BimmerCop · 03-28-2012, 06:34 PM

Quote:

Originally Posted by JimVR4

+1. I went with smoked and love them

Where can I get smoked side reflectos? Any pics on how they look on a Space Grey coupe?

Amini9 · 03-28-2012, 07:05 PM

Quote:

Originally Posted by Blubaron79

Can you post a link/pics of the lower bumper grille? I just added the black grille, and I'm curious about the lower grille.

+1.

Im curious about the lower grille too.

BimmerCop · 03-28-2012, 07:20 PM

Loving the look of my new black kidney grills/lower mesh!!!

Next? Plastidipping my shadowline gloss black!

BTW, should I leave those yellow side reflectors as-is? The quarter moon shaped yellow reflectors on the fenders above the tires, do you guys plastidip them or something?

OlivaresAnthony · 03-28-2012, 07:31 PM

Quote:

Originally Posted by BimmerCop

BTW, should I leave those yellow side reflectors as-is? The quarter moon shaped yellow reflectors on the fenders above the tires, do you guys plastidip them or something?

You should buy painted ones to match your car.

BimmerCop · 03-28-2012, 07:33 PM

Quote:

Originally Posted by OlivaresAnthony

You should buy painted ones to match your car.

Same color as the car?

Amini9 · 03-28-2012, 07:34 PM

What did you change for the lower grille? Was it not already black?

OlivaresAnthony · 03-28-2012, 07:36 PM

Quote:

Originally Posted by BimmerCop

Same color as the car?

Yeah, I think if they were black it would look weird.

BimmerCop · 03-28-2012, 07:38 PM

Quote:

Originally Posted by OlivaresAnthony

Yeah, I think if they were black it would look weird.

Gotcha... I guess I need to get myself a quart of Space Grey paint... How about the lighted reflectors on the fenders? I've heard some say to buy smoked reflectors but I can't find a link for them.

OlivaresAnthony · 03-28-2012, 07:44 PM

Quote:

Originally Posted by BimmerCop

Gotcha... I guess I need to get myself a quart of Space Grey paint... How about the lighted reflectors on the fenders? I've heard some say to buy smoked reflectors but I can't find a link for them.

I think some vendors sell pre-painted reflectors.
As far as the side markers, you can have them smoked by a tint place for real cheap. I've heard the aftermarket ones don't fit well.

Dozhdbog · 03-28-2012, 07:56 PM

I installed BMS angel eyes last week. When I showed my girlfriend, she asked what she was supposed to be looking at. I said, the angel eyes. She asked what was different. I said, the old lights were yellow, and now they're a slight blue.

She said she didn't get it and went back inside. Well, I like 'em anyway.

Game · 03-28-2012, 08:06 PM

Should have saved your money and done it yourself for $6.

Game · 03-28-2012, 08:14 PM

Quote:

Originally Posted by Exzackt

No it only peels off if you intentionally take the edge and peel. Comes off in one clean piece if you do 5-6 layers

I did my reflectors, side markers (light still shows through just the same), window trim, and 335i emblem yesterday. Couldn't be happier with results:

Sorry I don't have more pics with better light

How did your window trim turn out?

I had trouble getting mine perfect. At times part of the plastdip didn't want to come off smoothly without peeling off some of the finished trim.

Exzackt · 03-28-2012, 08:23 PM

Quote:

Originally Posted by Game

How did your window trim turn out?

I had trouble getting mine perfect. At times part of the plastdip didn't want to come off smoothly without peeling off some of the finished trim.

Mine came out perfect. The trick is to not tape all the way to the edge, by leaving an inch between the trim and tape. This allows for a clean cut when you peel the excess off. Basically you let the cars lines cut it for you, all you do is peel it off. I use to have this problem plasti dipping things until I watched the video I posted earlier

the infamous... · 03-28-2012, 08:25 PM

grills n mesh look good! u should def plastidip ur window trim gloss black.
n get sg reflectors.

03-27-2012, 06:43 PM	#25
335 oClock MOE Drives: 2011 e92 335i 6MT Join Date: Jun 2011 Location: Los Angeles Posts: 2,523 iTrader: (13)	... here goes 20 grand __________________ Duke Dynamics//Evolution Racewerks//LTBMW *335 oClocks Project Build//Photo Shoot*

03-27-2012, 06:46 PM	#26
Sales@modmy3.com BimmerPost Supporting Vendor Drives: Stock Join Date: Jul 2011 Location: Southern California Posts: 1,313 iTrader: (9)	congrats on your first mod now next, wheels, suspensions, tune, leds, and the list is un-ending >.< __________________ CREE LED Angel Eyes - $99 \| E90 M3 Rep Bumper - $350 \| E92 M3 Rep Bumper - $350 E90 LED Interior Kit - $60 \| E9x Matte/Piano Grilles - From $55 ModMy3.com \| Email: Sales@ModMy3.com

03-27-2012, 08:47 PM	#27
djjasper First Lieutenant Drives: 2007 E92 335i 6MT Join Date: Dec 2011 Location: PA Posts: 352 iTrader: (0)	Next up.... JB4!!! __________________

03-28-2012, 07:56 PM	#40
Dozhdbog Captain Drives: 2011 335i Sedan Join Date: Aug 2011 Location: Hollywood Posts: 954 iTrader: (0)	I installed BMS angel eyes last week. When I showed my girlfriend, she asked what she was supposed to be looking at. I said, the angel eyes. She asked what was different. I said, the old lights were yellow, and now they're a slight blue. She said she didn't get it and went back inside. Well, I like 'em anyway. __________________ 2011 E90 / Premium Package / Stage 2 PPK / Performance Suspension Last edited by Dozhdbog; 03-28-2012 at 08:23 PM.

03-28-2012, 08:06 PM	#41
Game Boycotting teaser threads Drives: E92 335i Join Date: Aug 2010 Location: Lockport/Chicago, IL Posts: 3,089 iTrader: (10)	Should have saved your money and done it yourself for $6. __________________ Space Gray / Saddle Brown E92 335i - APRIL 2013 Car of the Month FS: (1) 19x10 +25 VMR V710 Matte Black Writer at DecisiveSports.com

03-27-2012, 09:19 PM	#29
psmitty95 Lieutenant Colonel Drives: 2009 E90 335i xDrive Join Date: Jan 2012 Location: Greenwich, CT Posts: 1,910 iTrader: (4)	I love plasti dip and have used it for a ton of stuff however i would go against using it on the trim... I personally have never done it but i've spoken to people that have and they say its nearly impossible to get all the angles like the inside edges. If i were you i'd just Buy the vinyl here: http://www.bmwshadowline.com/ And follow these instructions: http://www.bmwshadowline.com/images/ShadowlineDIY.pdf Since i haven't done it yet i don't know how difficult it really is but from the instructions it seems like it's pretty easy and just requires patience. Also if you go the plasti dip route and use the glossifier you might not like how the gloss turns out. It's still slightly textured like the original matte black plasti dip unfortunately

03-28-2012, 07:20 PM	#33
BimmerCop Banned Drives: 2007 BMW 335i Coupe Join Date: Jan 2012 Location: Virginia Posts: 405 iTrader: (0)	Loving the look of my new black kidney grills/lower mesh!!! Next? Plastidipping my shadowline gloss black! BTW, should I leave those yellow side reflectors as-is? The quarter moon shaped yellow reflectors on the fenders above the tires, do you guys plastidip them or something?

03-28-2012, 07:34 PM	#36
Amini9 New Member Drives: '12 e92 335i Join Date: Mar 2012 Location: Bay Area Posts: 27 iTrader: (0)	What did you change for the lower grille? Was it not already black?

03-28-2012, 08:25 PM	#44
the infamous... Lieutenant General Drives: like I'M BOUT THAT LIFE Join Date: Jul 2008 Location: PARADISE aka DAWNTOWN Posts: 16,890 iTrader: (0)	grills n mesh look good! u should def plastidip ur window trim gloss black. n get sg reflectors. __________________ "simple is clean" -The ///ModFather [ iND ] - [ eAs ] - [ ACM ] - [ LTMW ] - [ AA ]

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search