[cn555ic]

I have sucessfully coded with the coding program NCSexpert for the E series models and the E-Sys coding software for the F series models. I can code ALL BMWs for the following model years:



-E90, E92, E93, E80s (all E series basically) 2006-2013
-E53 X5 2000-2006
-E60s 2004-2010
-E70s 2007-2013
-E83 2007-2010
-E46 2004-2006
-F01, F10, F12, F13, F20, F25, F30 ( all F series besides Z4 or X5) 2009-2013

These are a few of the most popular basic codings available:

-Key fob opens/closes windows/mirrors/sunroof/trunk lid
-CIC module DVD in motion
-Remove seatbelt chime/warning
-Enable windows to close when door is open
-Remove I-drive legal disclaimer on startup
-Euro double blinking hazards
-Komfort Eject- Key fob auto ejects from socket (E series only)
-Fog lights stay on while flashing high beams
-Fog lights stay on with high beams on
-remove bulb errors (LCI RETROFITS , LED replacement bulbs, etc)
-Registering new Battery
-Injector coding (e series)
-Reverse mirror passenger side to tilt further down to help avoid rim curbing (e series)
-Digital Speedo
-Efficient Dynamic Shifting (MT only)
-AE as daytime running lights
-Frm retrofit to FRM2
-CIC Navigation map update 2013
-TCU/BLUETOOTH Retrofit coding
-Folding mirror retrofit coding
-FRM1, FRM2, FRM3 short circuit reset
-Alpina B3 TCU transmission FLASH (only good for E series 3/07 till present


+ There are many other features that I can code that are on the PDF spreadsheet for the E and F series that you can find and download at the bottom of the page:



I can help anyone interested in CODING, to try it out for themselves and code YOUR own car, as it is not intimidating as it sounds and looks. I can actually give you a tutorial on NCSexpert as well as the E-sys for F-series coding

The laptop or netbook should be running Windows 32bit. A laptop running Windows 64bits is fine, but requires a VMware software to run a virtual machine. (Inquire for more info on that setup).

You need to buy a D-can cable from this link if you are coding with NCSexpert:
http://www.one-stop-electronics.com/...&product_id=16

For F-series coding with E-Sys you need to make your own cable which you can download the PDF at the bottom of the page..

You can PM me or Text me on my phone if you have any questions about coding or want a tutorial on how to code with NCSexpert or E-sys...Please text me instead of calling me! My location is roughly 5 minutes from the Verazzano Bridge area. I am available Monday through Friday from 10am-9pm and Saturdays and Sundays, I can fit you into my schedule.

917-939-4980

Steven

[Mojave92]

Originally Posted by cn555ic

I coded so far to my 2007 E93 with NCSexpert.

-folding mirrors/windows with key fob
-Side marker delete
-Blinker delete
-Digital speed readout
-Cluster lights always on
-Idrive warning message delete
-Seat belt chime delete pass/driver
-Annoying GONG when key is inserted
-Euro double blinking hazards

Next on my list:

-Keyfob automatic eject after ignition cutoff is pressed
-fog lights stay on when flashing high beams
-fog lights stay on when on high beams
-license plate light on when unlocking car
-+ many other features but I just need to see what I want

I can help anyone interested in the software to try it out for themselves and code YOUR own car, as it is not intimidating as it sounds and looks. You just need to buy the D-can cable (70-80 bucks) and I can help set it up for you on your own laptop. It has to be running Windows 32bit as 64 bit is not compatible.. I am sure you can run a Mac laptop using bootcamp parallels, but I am not familiar with it so I wont be able to get it going for you...


I need to get back to my performance mods that I have neglected this whole winter because of this coding!

You do u self ?
Can u email me?
Yyunior1@hormail.com

[plastixx]

dropbox.com

[Mojave92]

Originally Posted by cn555ic

Cant email the programs as they are too large to send via email and I dont have a server to upload the files to, plus it takes forever to do especially large files.

Can i use tha program for my 09 328xi? is cic

[NYC_e92]

you the man Stevo!

[ZheHbKa]

Originally Posted by cn555ic

Cant email the programs as they are too large to send via email and I dont have a server to upload the files to, plus it takes forever to do especially large files.

u can use dropbox

[PatJags156]

Love all the coding you have done. I'm in NJ and would love to do this as well..how far away are you..?

[PatJags156]

Hmm... you going over to NJ at all in the coming weeks? I could meet you anywhere you like.

Also, what is the "Speed Digital readout" code?

[ZheHbKa]

Originally Posted by cn555ic

What up kid! Long time no speak to man! Hows the married life!

I hear you but I rather just see the person and get it working for them in person!

hey! i know, been busy, getting warmer out, come out to one of the ceasars meets on Friday we'll take some pics

so far so good

whats going on with you?


yeah that's definitely better, i had one of the guys from the forum "onebadmofo" do some coding for me, i don't have much free time to play around with it


what have you been to these days?

[ZheHbKa]

Originally Posted by cn555ic

Same old crap...Work, kids and messing around with car, well not lately doing anything hardware related, but getting software...This winter was all about trying to get the software availabe for diagnostic and coding...these programs were not easy to get working...

get in touch with the guy that did it for me, he's pretty good, he can advise you

[NYC_e92]

Originally Posted by cn555ic

What's uP Rach!!! How's the house hunting going!

Hey Buddy!!!!! everything is good man. The hunt sucks

[TwinTorque]

Does coding void the CPO in any way? I'm interested and am in BK, any chance you're going to any future meets?

[TwinTorque]

Originally Posted by cn555ic

You can come by my showroom in Brooklyn tomorrow...Address is 765 65th street....I will be there from 11-5 pm....

My store is International Furniture

Will try and make it before 5, will send you a pm to confirm tomorrow. Thanks!

[sebaNYC]

can you please tell me whats the name of the cable or any link to buy it, i wat to code my car too but im not sure what cable should i get

[Alpine Whiteboy]

Will this work on my 2012 Mazda3 S-GT Hatch!?!?!?

[RevC]

good stuff dude! haven't talked to you a while cool your manning up and doing some coding. btw i think you're car is performanced out, lol! you know whats funny..i bought my xi cpo'd and for some reason i was used to my g35's auto windows- so today i went to unlock my car, held down the button and the windows went down by themselves, and when press holding the lock button they all closed, is that something that came like this or did the previous owner do some coding? my fogs also stay on when i put on my highbeams.. lol..hmm...

[RevC]

Originally Posted by Alpine Whiteboy

Will this work on my 2012 Mazda3 S-GT Hatch!?!?!?

only if its alpine white.

[Alpine Whiteboy]

Originally Posted by cn555ic

Hey Man thats a cool car bro..I have a Mazda 3 sedan as my beater and its one of the most reliable cars that I have owned...Put gas in it and it goes on and goes!

Wait... So you just basically called my new Mazda a BEATER....... :ANGERFACE:

[Alpine Whiteboy]

Originally Posted by cn555ic

Lol. Not intended that way! I meant the car is nice and smooth referring to my other car which is a Mazda 3. I used it everyday and it drives so smooth. Sometimes I feel better than my BMW in terms of smoothness but def not power though! Lol

LOL it's all good I know what you meant. The car is actually very nice IMO. Drives very smooth like you said, and is LOADED with options. Although its nowhere near as fast as my nearly 400 HP e92 was lol. But after I buy my house, I'll worry about getting another toy

I might stop by Ceasars bay sometime if I'm free. I'm suppose to start my Muay Thai training soon and classes are Tuesday and Thursday nights so, can't make no promises lol

[Mojave92]

Originally Posted by cn555ic

I will be by my showroom in Brooklyn from 930am till 1130am today. Come by if you want to

Hey man when you be back in brooklyn?

[Mojave92]

Originally Posted by cn555ic

This week should be Wednesday and Friday. Let me know if u want to swing by my store. I always have my laptop with me

Just let me know around what time you going to be in?
Thanks
If not on you store any other place tha I can meet you?

[ejazbmw]

you gonna be coding at CB?