[Bunkei]

Hi there,

There's a E92 335 owner and myself that have ran into a weird error. I've searched all over the board (and others too) and haven't found any leads. The story is this: I got my car retrofitted yesterday with the LCI Taillight retrofit that I bought from EAS (the lights are great by the way).

I had a coder follow the instructions located in the other thread to disable the bulb checks. Now, when the car starts up, there are no errors. However, as soon as I put the car in gear, there's a "rear right taillamp malfunction" error that comes on, and does not go away.

Has anyone heard of this issue, and if so, know the solution or perhaps point us to someone who may be able to help?

Thanks!

~Ben

[Dziqsek_]

I assume you do only Cold Check, not Warmcheck thats why your error pops up

[Bunkei]

Originally Posted by Dziqsek_

I assume you do only Cold Check, not Warmcheck thats why your error pops up

We thought of that too since the error occurs only when the car is put into gear. I will doublecheck this coming weekend when my coder comes to visit. Can you take a look at the other thread and see if there are any warm checks that might be missing from the list?

[Dziqsek_]

This is all functions you need to change to get rid of bulb errors :


Warm test Brake
WARMUEBERWACHUNG_BL_MI -> nicht_aktiv

Cold Test Brake
KALTUEBERWACHUNG_BL_MI -> nicht_aktiv

Warm test turn
WARMUEBERWACHUNG_BLK_HI -> nicht_aktiv

Cold test turn
KALTUEBERWACHUNG_BLK_HI -> nicht_aktiv

cold rear turn signal...
KALTUEBERWACHUNG_BLK_H -> nicht_aktiv

cold brake light.....
KALTUEBERWACHUNG_BL -> nicht_aktiv

warm rear turn signal...
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv

warm brake light..
WARMUEBERWACHUNG_BL -> nicht_aktiv

Brake force display
CC_MELD_BFD_BL -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_L -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_R -> nicht_aktiv


[[Cold Test Brake Light]]
KALTUEBERWACHUNG_BL -> nicht_aktiv

[[Warm Test Blinker Rear]]
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv

[[Warm Test Brake Light]]
WARMUEBERWACHUNG_BL -> nicht_aktiv

[[Cold Test Brake Force Display]]
KALTUEBERWACHUNG_BFD <--Cold BFD test

[[Warm Test Brake Force Display]]
WARMUEBERWACHUNG_BFD <--Warm BFD test

WARMUEBERWACHUNG_BLK_H


You may not have all features , they are from my nfrm but most of them should present in your module.

Greets from Poland

[Bunkei]

Originally Posted by Dziqsek_

This is all functions you need to change to get rid of bulb errors :


Warm test Brake
WARMUEBERWACHUNG_BL_MI -> nicht_aktiv

Cold Test Brake
KALTUEBERWACHUNG_BL_MI -> nicht_aktiv

Warm test turn
WARMUEBERWACHUNG_BLK_HI -> nicht_aktiv

Cold test turn
KALTUEBERWACHUNG_BLK_HI -> nicht_aktiv

cold rear turn signal...
KALTUEBERWACHUNG_BLK_H -> nicht_aktiv

cold brake light.....
KALTUEBERWACHUNG_BL -> nicht_aktiv

warm rear turn signal...
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv

warm brake light..
WARMUEBERWACHUNG_BL -> nicht_aktiv

Brake force display
CC_MELD_BFD_BL -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_L -> nicht_aktiv
FEHLERMELDUNG_CC_BFD_R -> nicht_aktiv


[[Cold Test Brake Light]]
KALTUEBERWACHUNG_BL -> nicht_aktiv

[[Warm Test Blinker Rear]]
WARMUEBERWACHUNG_BLK_H -> nicht_aktiv

[[Warm Test Brake Light]]
WARMUEBERWACHUNG_BL -> nicht_aktiv

[[Cold Test Brake Force Display]]
KALTUEBERWACHUNG_BFD <--Cold BFD test

[[Warm Test Brake Force Display]]
WARMUEBERWACHUNG_BFD <--Warm BFD test

WARMUEBERWACHUNG_BLK_H


You may not have all features , they are from my nfrm but most of them should present in your module.

Greets from Poland

Thank you sooo much. We'll go through each one this coming weekend to make sure we didn't miss anything. Greets from Seattle!!

~Ben

[makkan00]

I have tried and entered most of these codes, but still signal indicator flashes very quickly.
Any suggestions?

[Dziqsek_]

Originally Posted by makkan00

I have tried and entered most of these codes, but still signal indicator flashes very quickly.
Any suggestions?

There is a command with led_blinker_hinte or something like that, change it to aktiv

[rafiq335i]

Try a warm check

[makkan00]

Originally Posted by Dziqsek_

There is a command with led_blinker_hinte or something like that, change it to aktiv

It cannot be in English.
Can you kindly confirm what actually it is?

I changed all these values, and after finishing with programming, all values are reverting back to old values.

Coding works and I have done all other codings except this one.

Any suggestions?

[makkan00]

Originally Posted by rafiq335i

Try a warm check

Thanks mate, can you kindly explain what is it?

I have deactivated all cold and warm check but it still blinks fast.

[Dziqsek_]

Originally Posted by makkan00

It cannot be in English.
Can you kindly confirm what actually it is?

I changed all these values, and after finishing with programming, all values are reverting back to old values.

Coding works and I have done all other codings except this one.

Any suggestions?

Just checked in my frm2 and like i wrote before:

LED_BLINKER_HINTEN aktiv

[makkan00]

Originally Posted by Dziqsek_

Just checked in my frm2 and like i wrote before:

LED_BLINKER_HINTEN aktiv

Thanks mate.

Can I confirm couple of things with you.
A) How do you know that you have FRM or FRMA (Frm2)? Is it on production date or can you find out from inpa or NCS expert?
B) considering you used NCS expert, you do followings
Load profile to expert mode
Press F1 and F3 --> select E89.
Now a windows pop up and gives you CAS, FRM, and FRMA options. I go for CAS option (well tried FRM and FRMA too but no success).
Then you select back.
then you click on ECU tab and select FRM.
Now you click on read ECU (frm in this case).
A windows pops out with many digits.
Now you head to 'Shortcut to my work' and go for FSW_PSW and save it as FSW_PSW.MAN and edit all those things which you mentioned above.

Once done you go back to NCS expert and click on basic functions.
Select 'CoapiReadSgGetFswPsw' and ok.
A small window pops out saying 'basic function perfect ended'.
Press OK.
now change job type to 'SG_CODIEREN and press ok.
Execute job and once coding finished, I check the indicator and it is still flashing fast.


Sorry to put all this here, but just wants to know if I am doing anything wrong.

Despite of trying 20-30 times, no luck.

Any suggestions?

[cn555ic]

Originally Posted by makkan00

Thanks mate.

Can I confirm couple of things with you.
A) How do you know that you have FRM or FRMA (Frm2)? Is it on production date or can you find out from inpa or NCS expert?
B) considering you used NCS expert, you do followings
Load profile to expert mode
Press F1 and F3 --> select E89.
Now a windows pop up and gives you CAS, FRM, and FRMA options. I go for CAS option (well tried FRM and FRMA too but no success).
Then you select back.
then you click on ECU tab and select FRM.
Now you click on read ECU (frm in this case).
A windows pops out with many digits.
Now you head to 'Shortcut to my work' and go for FSW_PSW and save it as FSW_PSW.MAN and edit all those things which you mentioned above.

Once done you go back to NCS expert and click on basic functions.
Select 'CoapiReadSgGetFswPsw' and ok.
A small window pops out saying 'basic function perfect ended'.
Press OK.
now change job type to 'SG_CODIEREN and press ok.
Execute job and once coding finished, I check the indicator and it is still flashing fast.


Sorry to put all this here, but just wants to know if I am doing anything wrong.

Despite of trying 20-30 times, no luck.

Any suggestions?

The steps you are taking are correct to the tee, but your using the wrong profile in Expertmode...YOu are basically writing the default parameters back to factory settings...Did you follow the directions and make a writable profile in which you can edit and save the FSW_PSW.man file??

Did you do this from steps 21 to step 34 from this PDF???

http://www.e90post.com/forums/attach...6&d=1330630236

[Dziqsek_]

So wrong... Cn555ic wrote correct. I will pm you in couple pf hours its 4am here now and its the best time to gp to sleep

[makkan00]

Originally Posted by cn555ic

The steps you are taking are correct to the tee, but your using the wrong profile in Expertmode...YOu are basically writing the default parameters back to factory settings...Did you follow the directions and make a writable profile in which you can edit and save the FSW_PSW.man file??

Did you do this from steps 21 to step 34 from this PDF???

http://www.e90post.com/forums/attach...6&d=1330630236

Thanks cn555ic.
Since day 1, I could never do step 25, as I never get that screen.

My coding history started couple of months ago, where I could not do step 25. Asked many people, and nobody could reply and I was told to skip step 35.
The files I had, already had FSW_PSW.man file. I have successfully entered locking / unlocking beeps, 'v' on cluster and some other features.

However I am stuck at LCI retrofitting coding.
Can you kindly explain how to do step 25?

Thanks.

[makkan00]

Originally Posted by cn555ic

The steps you are taking are correct to the tee, but your using the wrong profile in Expertmode...YOu are basically writing the default parameters back to factory settings...Did you follow the directions and make a writable profile in which you can edit and save the FSW_PSW.man file??

Did you do this from steps 21 to step 34 from this PDF???

http://www.e90post.com/forums/attach...6&d=1330630236

Thanks Cn555ic and Dzik.
You guys are champs. I was not loading the correct profile.
My mistake. Sorted and it worked like a charm.

[Dziqsek_]

Your welcome- thats why we are here

[pepsih]

Bump for a very helpful thread

dzieki wielkie dziqsek hehe