Depo P90 Projectors to suit pre-LCI E90 - Page 3 - BMW 3-Series (E90 E92) Forum

woosh · 09-11-2011, 10:38 PM

pcockley: lets play

LT5PLA: all i can say is lol @ your plates resembling Alan's plates.

sbce90 · 09-12-2011, 04:22 AM

Quote:

Originally Posted by pcockley

Ok now let me say i am shit at plates, but is that meant to mean something

bloody hell you're TERRIBLE at recognising plates.

Stuart@BMRAutowerkes · 09-12-2011, 04:53 AM

Quote:

Originally Posted by LT5PLA

Lets play lol

anyways, is there a guide on how to adjust the level of the headlights?

grab an allen key or hex tool and look for a white/beige coloured slot to put the allenkey/hex tool in and you can rotate it which will adjust the beam up and down...

it's over near the 'outer' edge of the projectors and it's facing up at you through the bonnet...

if you need pics lemme know.

LT5PLA · 09-12-2011, 06:54 PM

pics wouldnt hurt lol

are u talking about the depo headlights tho?

Stuart@BMRAutowerkes · 09-12-2011, 08:49 PM

Quote:

Originally Posted by LT5PLA

pics wouldnt hurt lol

are u talking about the depo headlights tho?

Yeh, for the depos. Ok I'll get some pics for you..

VicXD888 · 09-13-2011, 12:10 AM

Some pic at this link

http://www.e90post.com/forums/showpo...5&postcount=20

Aaron.B · 09-30-2011, 06:24 AM

did you manage to get to the bottom of the weird beam pattern, im also looking the depo angel eyes but this pattern worries me

Stuart@BMRAutowerkes · 09-30-2011, 09:32 AM

Quote:

Originally Posted by AZZ

did you manage to get to the bottom of the weird beam pattern, im also looking the depo angel eyes but this pattern worries me

my beam pattern was fine, as were others I have seen... unforunately I think vicxd might have an isolated incident

Aaron.B · 09-30-2011, 09:43 AM

Quote:

Originally Posted by bmroxm5

my beam pattern was fine, as were others I have seen... unforunately I think vicxd might have an isolated incident

vicxd? whats that?

Also, do you have to open the headlights up to replace the rings with led rings or can you replace the small standard ring bulbs with led bulbs?

VicXD888 · 10-02-2011, 05:33 PM

I'm stuck with the light pattern. Not happy with it, but can live with it for now.

I tried to rotate the light globe, but the socket only allowed for the wire pointing down.

I didn't open the headlight up. Kept the original yellow angle eyes.

Tried to contact Jason at Eurodivision a couple of times, but still haven't heard his reply.

Will need to bring the car back to Hamzi (the installer) for other installation and will ask him to check it out.

Stuart@BMRAutowerkes · 10-03-2011, 08:07 AM

Quote:

Originally Posted by AZZ

vicxd? whats that?

Also, do you have to open the headlights up to replace the rings with led rings or can you replace the small standard ring bulbs with led bulbs?

'vicxd' I was referring to another member who had these lights..

yes I had to open up the headlight lens to replace the LED angel eyes.

clt330ci · 03-06-2012, 10:47 AM

bmroxM5... I installed some P90 with standard halogen AE for a Pre-LCI.. They are in my buddies car '07 328. Got some questions about upgrading the AE..

Can I jus take the headlight apart and replaces the 4 wedge bulbs in each ring with LED's?
Or is it better and/or easier to jus swap out for LED rings like shown here?
I prefer the bulb swap if it's easier, I figured installing the other LED rings was for brightness..

Stuart@BMRAutowerkes · 03-06-2012, 05:06 PM

Quote:

Originally Posted by clt330ci

bmroxM5... I installed some P90 with standard halogen AE for a Pre-LCI.. They are in my buddies car '07 328. Got some questions about upgrading the AE..

Can I jus take the headlight apart and replaces the 4 wedge bulbs in each ring with LED's?
Or is it better and/or easier to jus swap out for LED rings like shown here?
I prefer the bulb swap if it's easier, I figured installing the other LED rings was for brightness..

imo I think it would be easier to replace with the LED rings as shown here... these rings are virtually plug and play and either way, you'll have to open up the headlight housing.

Also the little bulbs (4 per ring) that power the regular AE on the Depo P90 are tiny and I think you would have a hard time finding a replacement and installing it.

Goodluck.

clt330ci · 03-07-2012, 10:26 AM

Quote:

Originally Posted by bmroxm5

imo I think it would be easier to replace with the LED rings as shown here... these rings are virtually plug and play and either way, you'll have to open up the headlight housing.

Also the little bulbs (4 per ring) that power the regular AE on the Depo P90 are tiny and I think you would have a hard time finding a replacement and installing it.

Goodluck.

Actually I found a website to get the LED's fairly cheap..

http://www.ledwholesalers.com/store/...&productId=338

Found link on this forum somewhere.. It would be 16 of these and would be about $30 for the LED's.. What was your price on the LED rings?

Stuart@BMRAutowerkes · 03-07-2012, 09:08 PM

Quote:

Originally Posted by clt330ci

Actually I found a website to get the LED's fairly cheap..

http://www.ledwholesalers.com/store/...&productId=338

Found link on this forum somewhere.. It would be 16 of these and would be about $30 for the LED's.. What was your price on the LED rings?

Those LEDs still look a bit big, look closely at the bulbs powering the rings and they are ~2x4mm...

I have the bulbs that I ripped out of one of the sets, I'll take a photo to show you.

IIRC the LED rings are ~$200 but I don't even know if they are available anymore.

clt330ci · 03-12-2012, 11:33 AM

Quote:

Originally Posted by bmroxm5

Those LEDs still look a bit big, look closely at the bulbs powering the rings and they are ~2x4mm...

I have the bulbs that I ripped out of one of the sets, I'll take a photo to show you.

IIRC the LED rings are ~$200 but I don't even know if they are available anymore.

I found these LED AE on eBay.. Are these the same AE(or similar) that you used for your install??

Appearance wise they look every similar

http://item.mobileweb.ebay.com/viewi...d=150769603601

Stuart@BMRAutowerkes · 03-12-2012, 11:45 PM

Quote:

Originally Posted by clt330ci

I found these LED AE on eBay.. Are these the same AE(or similar) that you used for your install??

Appearance wise they look every similar

http://item.mobileweb.ebay.com/viewi...d=150769603601

Yes they are the ones.

I believe fishcake is a reputable seller and a lot of US guys get their Depos from him.

clt330ci · 03-29-2012, 08:16 PM

Quote:

Originally Posted by bmroxm5

Yes they are the ones.

I believe fishcake is a reputable seller and a lot of US guys get their Depos from him.

Thanks!
Came in this week and gettin started Saturday morning!

cruvon · 03-30-2012, 02:07 AM

Beautiful writeup Stu, just reading it again

!

wickedfrog86 · 04-16-2012, 07:05 PM

Hey bmroxm5,

How did you get the ambers to be off during the day? I just got a pair of Depos for my 08 e90 sedan from fishcake on ebay as well and would love to have angel eyes on without the ambers (I'm a newbie, sorry if you already answered this question).

Thanks for your help bud!!

Stuart@BMRAutowerkes · 04-17-2012, 01:34 AM

Quote:

Originally Posted by wickedfrog86

Hey bmroxm5,

How did you get the ambers to be off during the day? I just got a pair of Depos for my 08 e90 sedan from fishcake on ebay as well and would love to have angel eyes on without the ambers (I'm a newbie, sorry if you already answered this question).

Thanks for your help bud!!

Not sure on that, perhaps cause these are 'Aus Spec' headlights I did not have to do anything to turn the ambers off during the day.

If you only want them to be on when your driving light/low beams are on I imagine you could rewire them quite easily to do so.

Goodluck.

mrtanz · 04-17-2012, 04:48 AM

pretty sure it could be coded to either be on or off?

09-30-2011, 06:24 AM	#51
Aaron.B 'The Godfather' Drives: SAAB 9-3 Aero TTiD Join Date: Apr 2011 Location: Crossgar, Northern Ireland Posts: 1,048 iTrader: (0)	did you manage to get to the bottom of the weird beam pattern, im also looking the depo angel eyes but this pattern worries me __________________

10-02-2011, 05:33 PM	#54
VicXD888 Dan Drives: BMW 325i 06 & BMW X5 08 Join Date: Sep 2010 Location: Hampton, Victoria Posts: 9 iTrader: (0)	I'm stuck with the light pattern. Not happy with it, but can live with it for now. I tried to rotate the light globe, but the socket only allowed for the wire pointing down. I didn't open the headlight up. Kept the original yellow angle eyes. Tried to contact Jason at Eurodivision a couple of times, but still haven't heard his reply. Will need to bring the car back to Hamzi (the installer) for other installation and will ask him to check it out. Last edited by VicXD888; 10-02-2011 at 05:54 PM.

03-06-2012, 10:47 AM	#56
clt330ci New Member Drives: E46 330ci Join Date: Mar 2012 Location: Spartanburg SC Posts: 5 iTrader: (0)	?? bmroxM5... I installed some P90 with standard halogen AE for a Pre-LCI.. They are in my buddies car '07 328. Got some questions about upgrading the AE.. Can I jus take the headlight apart and replaces the 4 wedge bulbs in each ring with LED's? Or is it better and/or easier to jus swap out for LED rings like shown here? I prefer the bulb swap if it's easier, I figured installing the other LED rings was for brightness..

03-30-2012, 02:07 AM	#63
cruvon Lieutenant Colonel Drives: BMW 320i Exec (E90) Join Date: Feb 2010 Location: Sydney, Australia Posts: 1,520 iTrader: (1)	Beautiful writeup Stu, just reading it again! __________________ Tiag E90 \| JBSPEED Spli t t ers \| JBSPEED ACS style Roof Spoiler \| JBSPEED M3 style Trunk spoiler \| Euro plates \| K&N Intake \| BMW OEM Performance Exhaust \| Debadged \| OEM Chromeline trim \|230 OEM rims \| 19" Michelin Pilot Sport PS2 Non runflats Wishlist/In Progress: \| OEM Burr Walnut Gear knob \| OEM Blacklines \| OEM Spacesaver \|

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-11-2011, 10:38 PM	#45
woosh Lieutenant Colonel Drives: bsm e82 Join Date: Dec 2007 Location: Sydney Posts: 1,995 iTrader: (0)	pcockley: lets play LT5PLA: all i can say is lol @ your plates resembling Alan's plates.

09-12-2011, 06:54 PM	#48
LT5PLA Private Drives: BMW E90 Join Date: Jun 2011 Location: AUSTRALIA Posts: 94 iTrader: (0)	pics wouldnt hurt lol are u talking about the depo headlights tho?

09-13-2011, 12:10 AM	#50
VicXD888 Dan Drives: BMW 325i 06 & BMW X5 08 Join Date: Sep 2010 Location: Hampton, Victoria Posts: 9 iTrader: (0)	Some pic at this link http://www.e90post.com/forums/showpo...5&postcount=20

04-16-2012, 07:05 PM	#64
wickedfrog86 New Member Drives: 2008 BMW e90 Join Date: Apr 2012 Location: Norton Shores, MI Posts: 17 iTrader: (0)	Hey bmroxm5, How did you get the ambers to be off during the day? I just got a pair of Depos for my 08 e90 sedan from fishcake on ebay as well and would love to have angel eyes on without the ambers (I'm a newbie, sorry if you already answered this question). Thanks for your help bud!!

04-17-2012, 04:48 AM	#66
mrtanz Lieutenant Drives: BMW 2008 325i upgrade Join Date: Sep 2010 Location: Sydney, Australia Posts: 420 iTrader: (0)	pretty sure it could be coded to either be on or off?