[bmwjavier]

Please I need Sp-DATEN v46.1 NCS for BMW E60.

I can´t find it

Thans,

[Dziqsek_]

lol first post and already request, i wont help you ,i dont like people like this. Everything can be found....

[bmwjavier]

Originally Posted by Dziqsek_

lol first post and already request, i wont help you ,i dont like people like this. Everything can be found....

Sorry. I can find V45 but i can´t find V46 and I need V46,

Sorry,

[Dracon]

The error looks like you are trying to select LM2 as the module to load and it's trying to load the LM2 coding index which isn't compatible with an LM.

There's been no changes between V45 to V46 for the E60 chassis. It's the same coding data. I checked my V45 E50 data and it has the coding files for coding index .C0E (which is 0EH) the file is LM_E60.C0E

Make sure you are selecting LM and not LM2, they are different modules and have different coding indexes, LM has 0B, 0C, 0D, 0E and LM2 has 32, 33, 34, 35.

[Dziqsek_]

From v44 there is no new updates to e60, and to e90 v45 to v46 its only cas and dde

[Dracon]

Originally Posted by Dziqsek_

From v44 there is no new updates to e60, and to e90 v45 to v46 its only cas and dde

According to the I-Level information,

No changes between v41-v44, I-Level stayed at E060-11-03-501.

I-Level changed to E060-11-12-500 with v45 and has stayed that way with v46, indicating no changes between the two versions.

[Dziqsek_]

I know ive rading ilevel, but changes are only in few modules so i dint count it as changes

[bmwjavier]

I tried coding KOMBI and the same error:

COAPI-2041: Wrong ecu coding index
A_E60KMB: CODIERINDEX = 06h

I have sp-daten V-45

[Coding@DetailAddict]

Did you install your v45 correctly

[Dracon]

Originally Posted by bmwjavier

I tried coding KOMBI and the same error:

COAPI-2041: Wrong ecu coding index
A_E60KMB: CODIERINDEX = 06h

I have sp-daten V-45

It really sounds like you haven't loaded the v45 daten properly into NCS Expert.

So back and re-read the beginner's topics and follow the instructions to the letter on how to load the daten.

EDIT: I'm feeling nice today, and I'll only do this once. Attached is a link to the *complete* NCS coding data from 45.2 (it has the sgdat, daten and ediabas\ecu directories from every chassis). I know these datens are loaded properly and work because 1. I did it myself and 2. They've been tested. Extract and copy the folders to their correct locations. If you are still having problems, then something is wrong with your installation. If copying these files into place makes everything work, then you loaded the datens wrong in the first place and need to re-read the getting started threads.

V45.2.7z

[Coding@DetailAddict]

My money is on bad daten update.

[JAZA]

http://www.mediafire.com/download.php?i426j64jpdxdz2l

[bmwjavier]

Originally Posted by Dracon

It really sounds like you haven't loaded the v45 daten properly into NCS Expert.

So back and re-read the beginner's topics and follow the instructions to the letter on how to load the daten.

EDIT: I'm feeling nice today, and I'll only do this once. Attached is a link to the *complete* NCS coding data from 45.2 (it has the sgdat, daten and ediabas\ecu directories from every chassis). I know these datens are loaded properly and work because 1. I did it myself and 2. They've been tested. Extract and copy the folders to their correct locations. If you are still having problems, then something is wrong with your installation. If copying these files into place makes everything work, then you loaded the datens wrong in the first place and need to re-read the getting started threads.

V45.2.7z

Thank you Dracon! Thank you very much! I will try with this Daten! Thank you!

[alpina527]

How do you get the info on the changes in each i level? Is it listed on pdf somewhere?

[Dracon]

Originally Posted by alpina527

How do you get the info on the changes in each i level? Is it listed on pdf somewhere?

There is no publicly listed change log published by BMW with the I-Levels so you can't check for individual changes, or what changes were made to each ECU firmware.

[Dziqsek_]

^^ this, only software number changes are listed on ilevel

[Gee_115]

Originally Posted by Dracon

It really sounds like you haven't loaded the v45 daten properly into NCS Expert.

So back and re-read the beginner's topics and follow the instructions to the letter on how to load the daten.

EDIT: I'm feeling nice today, and I'll only do this once. Attached is a link to the *complete* NCS coding data from 45.2 (it has the sgdat, daten and ediabas\ecu directories from every chassis). I know these datens are loaded properly and work because 1. I did it myself and 2. They've been tested. Extract and copy the folders to their correct locations. If you are still having problems, then something is wrong with your installation. If copying these files into place makes everything work, then you loaded the datens wrong in the first place and need to re-read the getting started threads.

V45.2.7z

Hey, I've been having the same problem. I already had v45 and I also downloaded from your link but I still do not have any .grp files in either ecu folder. Do you know where I can find these files?

[jadleb]

Hi to all

I have a similar problem with my e90.
i did retrofit the CIC but i can not access my CIC unit via ncs it it giving me ECU CODIERINDEX error.

Gee_115 did you fix your problem

[rich123321]

Originally Posted by jadleb

Hi to all

I have a similar problem with my e90.
i did retrofit the CIC but i can not access my CIC unit via ncs it it giving me ECU CODIERINDEX error.

Gee_115 did you fix your problem

Have you added the VO to the car? Maybe the car does not know that it has the CIC

[bmwcod]

Ensure ediabas is updated to 7.2.0. Should work.