[Thrash]

Yikes, ok Rob, where did you go?

Originally Posted by Rob.K

Eurasia quoted me over $1K...

[ray_futbol]

Originally Posted by aig01

Does anyone know of an installer for coilovers in either Edm or Cgy?, I tried Autoworks in Calgary however they were quoting $8 bills...which seems a bit excessive.

I asked these people about installing Kw's:

Tunerworks calgary quoted me $1000
Wheels plus best they could do is $735 all in (with alignment and corner balance if i can recall correctly)
Speedtech edmonton said it would take around 5 hours to do and their shop rate is $95/hr and $100/hr for alignment and they told me they're very familiar with the e90 chassis

[Rob.K]

Originally Posted by aig01

Yikes, ok Rob, where did you go?

Went to Wheels Plus where I got it done for under $450 and let Ray know to check them out.
But he's getting quotes for $700ish. Looks like they jacked up their prices too...
Maybe it'll have to be a DIY project?

[Thrash]

Thanks for the responses, much appreciated, I think it would be a bit tough as a DIY for me, I will probably end up in Edmonton to get this done just need to source the KW or H&H coilovers, I received a quote for $1,300 for the KW from the states with $175 shipping (ouch).

Seems like a lot of $$$ for simply changing that goofy stance of the xi, but it seems the best way to go as springs alone seems to present issues to the stock shocks.

[Inzane]

Originally Posted by Rob.K

Eurasia quoted me over $1K...

Did that include an alignment and corner-balance? If yes, then that's not bad.

A guy I know in my local Z Car club had his 350Z alignment (including corner-balance) done at Eurasia and his bill was $600. But practically his entire suspension was all aftermarket adjustable pieces.

[Rob.K]

Don't remember, it was quite a while ago. But $1K was way too much when I kept hearing installs in the States being done for $200-300

[ray_futbol]

Originally Posted by aig01

Thanks for the responses, much appreciated, I think it would be a bit tough as a DIY for me, I will probably end up in Edmonton to get this done just need to source the KW or H&H coilovers, I received a quote for $1,300 for the KW from the states with $175 shipping (ouch).

Seems like a lot of $$$ for simply changing that goofy stance of the xi, but it seems the best way to go as springs alone seems to present issues to the stock shocks.

Dont forget duties/ taxes Just re-read all my emails. Wheels plus said $735 for install (alignment + corner balance included). Tunerworks quoted $1575 for kw v1 and $1500 for h&r street performance coil from wheel works.

For myself I decided to do bilstein sports with eibach pro springs which will go in at the end of the month

[///N54]

https://www.facebook.com/groups/BMW.alberta

bumppp

[Thrash]

Thanks, received the same quote from Tunerworks, with about 6hrs. of labour, I don't think that included alignment.

What did you end up spending on the bilstein setup? + install, thoughts on why you went with it, did you source locally?

Originally Posted by ray_futbol

Dont forget duties/ taxes Just re-read all my emails. Wheels plus said $735 for install (alignment + corner balance included). Tunerworks quoted $1575 for kw v1 and $1500 for h&r street performance coil from wheel works.

For myself I decided to do bilstein sports with eibach pro springs which will go in at the end of the month

[ray_futbol]

Originally Posted by aig01

Thanks, received the same quote from Tunerworks, with about 6hrs. of labour, I don't think that included alignment.

What did you end up spending on the bilstein setup? + install, thoughts on why you went with it, did you source locally?

Buddy of mine gave me his hibachis pro springs from his 335i which i'll be using. Biltstein's i bought locally which were about $800 ish. Install is approx $500 including alignment.

Decided to do this instead, because it seems like too much of a hassle just to raise and lower for winter, and just so many more problems with our colder winters and lots of salt etc. Cold weather, the coils could get a little squeaky and heard from others which I'm not sure if it's true or not, but their adjusting bolts ended up rusting so they lost that function
I'm also not tracking the car either, so another reason why i went with shock/strut + springs

Heard the bilsteins are just a tad stiffer than ZSP's. The koni sa yellows front are adjustable which is nice, but they're back ordered just about everywhere i checked.

[Airboy]

Dyno'd car again, this time with Husky 94 in the tank (filled with 52L). ECU added a bunch of ignition advance and power is up from the first set of runs last year with 91 octane (Shell, iirc)




Maybe it is time to test "stage 1" with the Cobb Accessport

[miguex@ecuprogram]

^ Yep, I have always filled Husky 94 on my car! I am still doing it for 4 years and got zero issues (Calgary BMW told me against to use it! Yeah sure!!! lol ).

[bigup]

Interesting .. I've always used Husky 94 since I started to increase the boost .. always felt better, even when using meth.

People keep telling me it's bad gas, but I'm inclined to think otherwise

[Phantom 335i]

Hope some of you can make it out.
It was a great show last year,

[pounder]

hi all,

cody here aka pounder. Came from the mitsu world. Check out my thread here!
I live in Ponoka, they let me out from time to time to drive my 08 335i.

http://www.e90post.com/forums/showthread.php?t=710770

[ZIPNBYE]

Did the Alberta Facebook group go poof?

[skylineguv]

New guy from Calgary here with a white E92 335.....wife picks hers up tomorrow. His and hers yet again (we both have/had Evolution X's before).

We also know the other new guy a couple of posts above. Scarred for life as a result

[Rob.K]

Originally Posted by ZIPNBYE

Did the Alberta Facebook group go poof?

http://www.facebook.com/groups/BMW.alberta/

[ZIPNBYE]

Originally Posted by Rob.K

http://www.facebook.com/groups/BMW.alberta/

Try that link...it's gone poof. Content unavailble. I was a member of the group, and it's no longer listed.

[Rob.K]

Originally Posted by ZIPNBYE

Try that link...it's gone poof. Content unavailble. I was a member of the group, and it's no longer listed.

hmm must be a problem on your end. Works fine for me and people are posting today...

[Rob.K]

Did you accidentally remove yourself from the group? I don't see a Richard in the Members List

[ZIPNBYE]

No, I didn't remove myself, but after making a comment about the street racing videos that were posted and how those should not be condoned, it would appear that I'm out. WTF?