INPA problem? (both black dots are on) - BMW 3-Series (E90 E92) Forum

milly · 11-29-2011, 05:50 PM

Ok so when i open inpa, it connects and both black dots show....unfortunately i don't have the option to choose my car (f9)

look at the pic... what shoild i do?

milly · 11-29-2011, 06:05 PM

Okay I downloaded new version of inpa and it seems to work but now when I try to check the air bags an error comes up saying not found or file not found or something... What do I need to do?

Thanks

1QuikWS6 · 11-30-2011, 02:48 AM

Disregard the airbag error - that airbag check listed in the post doesn't work for most people...

Never has worked on my car & I have been coding since the day that BMW Coding thread was started.

milly · 11-30-2011, 06:40 AM

[quote=1QuikWS6;10893011]Disregard the airbag error - that airbag check listed in the post doesn't work for most people...

Never has worked on my car

milly · 11-30-2011, 06:45 AM

That's good to know, thank you!

mot · 04-05-2012, 09:19 PM

I get an error when I check my airbags also. It says my version is out of date/ does not match. Anyone have this issue and how do I clear it?

Alpineweiss e90 · 04-05-2012, 10:51 PM

What version of INPA did you get? The one you show in your first post is bare and looks like it was installed from an original release of BMW Standard Tools. Did Toolset 32 and WinKPF (or something like that) install as well?

The original release of BMW Standard tools does not include scripts or any daten files, etc. You need to load them after your install INPA, in the proper C:\ directory.

mot · 04-06-2012, 09:27 PM

Anyone?

Alpineweiss e90 · 04-06-2012, 09:36 PM

I told you.....you need to load the scripts and daten files into the correct folders in your C:\ directories. Check out bmw coding . com

EDIT: Wait you're not the OP, sorry.

But regardless, I believe you may need newer daten files.

mot · 04-06-2012, 10:37 PM

I was using v45

e90sexion · 04-06-2012, 11:58 PM

Quote:

Originally Posted by mot

I get an error when I check my airbags also. It says my version is out of date/ does not match. Anyone have this issue and how do I clear it?

when I check the airbags, some error box came up on the screen but I ignored it, and now looks like many others do too. Coding worked for me tho.

mot · 04-07-2012, 08:22 AM

I would like to diagnose the car using INPA though.

cn555ic · 04-07-2012, 09:48 AM

It's weird. When I first installed INpa my lights would work fine with my Old IBM laptop. When connected battery light would just light up and when ignition was turned on the ignition would then also log black which is normal. Installed on a new laptop and now when I am just connected with no ignition the battery light does not come on, but when I turn ignition on both circles turn black. Connection is perfect but it just doesn't light up the connection circles like before. Weird

VTECaddict · 04-07-2012, 03:36 PM

Quote:

Originally Posted by Alpineweiss e90

What version of INPA did you get? The one you show in your first post is bare and looks like it was installed from an original release of BMW Standard Tools. Did Toolset 32 and WinKPF (or something like that) install as well?

The original release of BMW Standard tools does not include scripts or any daten files, etc. You need to load them after your install INPA, in the proper C:\ directory.

I have the same problem. Can you tell me what exactly I need to move where? I tried searching and I cant find anything.

I have v45 daten files and BMW Standard Tools 2.11

melloww22 · 05-23-2012, 12:11 AM

I received two errors when trying to read the airbag function...

Error1: "versions do not match"
Error2 Pops right after error 1: "language variants do not match "

I am using INPA v5.02 , EDIABAS v6.4.7 , with Daten SP-V45-E89

I have a 2011 April build 335 e90, last year i had the dealer perform the Power Perfromance Kit.

Is it telling me that my car was tuned using a newer/older version of INPA? What is the next step?

Thank you in advance for your help in this matter...

GenePoole · 05-23-2012, 07:22 AM

Quote:

Originally Posted by melloww22

I received two errors when trying to read the airbag function...

Error1: "versions do not match"
Error2 Pops right after error 1: "language variants do not match "

I am using INPA v5.02 , EDIABAS v6.4.7 , with Daten SP-V45-E89

I have a 2011 April build 335 e90, last year i had the dealer perform the Power Perfromance Kit.

Is it telling me that my car was tuned using a newer/older version of INPA? What is the next step?

Thank you in advance for your help in this matter...

Those are warnings, not errors. I don't think they are any cause for alarm. I think it just means that you have a mix of German and English INPA scripts and/or some scripts compiled for a different version or language variant of INPA. Unfortunately, we don't have (that I know of) the source code for the common scripts that are part of most of the INPA distributions floating around or we could recompile them for the proper version/language variant.

melloww22 · 05-23-2012, 11:48 AM

Mixed Success!!

I was able to do the following:

CAS: BC_DIGITAL_V
CAS: DIGITAL_KVA
CAS: BC_DIGITAL_V_KORREKTUR
KOMBI: KOMFORTSCHLIESSUNG_FB
KOMBI: LEGAL_DISCLAIMER_TIME
KOMBI: NAVI_FUELSTOP_PROPOSAL

however

I wanted to code:
FRM (NFRM) LH_UND_NSW_NICHT_GLEICHZ
FRM (NFRM) FL_UND_NSW_NICHT_GLEICHZ

I was unable to read the NFRM. I received the following errors:

COAPI-2000: EDIABAS or SGBD error
BIP-0009: BEST VERSION ERROR

Here is the error log:

ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000
COAPI-2000: EDIABAS or SGBD error
BIP-0009: BEST VERSION ERROR

Any guideance is greatly appreciated...

____

EDIT: I think it has to do with having newer daten files and 6.4.7 wont read them correctly, I am going to try using EDIABAS 7.2.0.

Coding@DetailAddict · 05-23-2012, 12:15 PM

^update your daten and ediabas

melloww22 · 05-23-2012, 10:40 PM

installing smart tools 2.11 resolved my problem...

11-29-2011, 05:50 PM	#1
milly Captain Drives: 328i Join Date: Dec 2010 Location: Charleston, SC Posts: 790 iTrader: (3) Garage List 2008 328i (e90) [4.50]	INPA problem? (both black dots are on) Ok so when i open inpa, it connects and both black dots show....unfortunately i don't have the option to choose my car (f9) look at the pic... what shoild i do? __________________ Black 2008 328i e90-BMW Performance CF Strut Bar/Muffler delete/8000k Fogs Fogs/Trunk Spoiler/5% Tint/BlueTooth/JVC HU/AG M359 Wheels/Matte Black kidney grills/H&R Race Springs/Koni Yellows/Orion V2 Angel Eyes/EuroCharged Tune/
	Tweet

11-29-2011, 06:05 PM	#2
milly Captain Drives: 328i Join Date: Dec 2010 Location: Charleston, SC Posts: 790 iTrader: (3) Garage List 2008 328i (e90) [4.50]	Okay I downloaded new version of inpa and it seems to work but now when I try to check the air bags an error comes up saying not found or file not found or something... What do I need to do? Thanks __________________ Black 2008 328i e90-BMW Performance CF Strut Bar/Muffler delete/8000k Fogs Fogs/Trunk Spoiler/5% Tint/BlueTooth/JVC HU/AG M359 Wheels/Matte Black kidney grills/H&R Race Springs/Koni Yellows/Orion V2 Angel Eyes/EuroCharged Tune/

11-30-2011, 02:48 AM	#3
1QuikWS6 No 55mph Drives: 09 E92 328ix Cpe Join Date: Jul 2009 Location: Blitzburgh, PA Posts: 3,143 iTrader: (68)	Disregard the airbag error - that airbag check listed in the post doesn't work for most people... Never has worked on my car & I have been coding since the day that BMW Coding thread was started. __________________ 2009 328ix E92 Cpe//SGM//ACS Roof Spoiler//MTech Aero Lip+Trunk Spoiler//M3 Side Skirts//CF Roundels//CF Grilles//M3 Novillo Interior//Perf Shift Lever+Boot//M3 DCT Wheel//M3 GT3 eBrake Handle/Boot//ACS Pedals//M3 Mirrors//LCI Tailights//LUX H8v3 AE/MTec 6000K D1S/HPB HID 6000K Fogs//HPB LED Interior//RPI Scoops//CF Euro Airbox+Underhood Hsgs//K&N//MTech Rear Bumper/iS Sport Diffuser//MFD Strut Brace//PBX//BMW 193M's+Kumho 4X

11-30-2011, 06:40 AM	#4
milly Captain Drives: 328i Join Date: Dec 2010 Location: Charleston, SC Posts: 790 iTrader: (3) Garage List 2008 328i (e90) [4.50]	[quote=1QuikWS6;10893011]Disregard the airbag error - that airbag check listed in the post doesn't work for most people... Never has worked on my car __________________ Black 2008 328i e90-BMW Performance CF Strut Bar/Muffler delete/8000k Fogs Fogs/Trunk Spoiler/5% Tint/BlueTooth/JVC HU/AG M359 Wheels/Matte Black kidney grills/H&R Race Springs/Koni Yellows/Orion V2 Angel Eyes/EuroCharged Tune/

11-30-2011, 06:45 AM	#5
milly Captain Drives: 328i Join Date: Dec 2010 Location: Charleston, SC Posts: 790 iTrader: (3) Garage List 2008 328i (e90) [4.50]	That's good to know, thank you! __________________ Black 2008 328i e90-BMW Performance CF Strut Bar/Muffler delete/8000k Fogs Fogs/Trunk Spoiler/5% Tint/BlueTooth/JVC HU/AG M359 Wheels/Matte Black kidney grills/H&R Race Springs/Koni Yellows/Orion V2 Angel Eyes/EuroCharged Tune/

04-05-2012, 09:19 PM	#6
mot Captain Drives: e92 AW M3 6MT Join Date: Oct 2010 Location: Bay Area, California Posts: 862 iTrader: (8)	I get an error when I check my airbags also. It says my version is out of date/ does not match. Anyone have this issue and how do I clear it?

04-05-2012, 10:51 PM	#7
Alpineweiss e90 Banned Drives: AW 330xi Join Date: Feb 2012 Location: . Posts: 220 iTrader: (0)	What version of INPA did you get? The one you show in your first post is bare and looks like it was installed from an original release of BMW Standard Tools. Did Toolset 32 and WinKPF (or something like that) install as well? The original release of BMW Standard tools does not include scripts or any daten files, etc. You need to load them after your install INPA, in the proper C:\ directory.

04-06-2012, 09:27 PM	#8
mot Captain Drives: e92 AW M3 6MT Join Date: Oct 2010 Location: Bay Area, California Posts: 862 iTrader: (8)	Anyone?

04-06-2012, 09:36 PM	#9
Alpineweiss e90 Banned Drives: AW 330xi Join Date: Feb 2012 Location: . Posts: 220 iTrader: (0)	I told you.....you need to load the scripts and daten files into the correct folders in your C:\ directories. Check out bmw coding . com EDIT: Wait you're not the OP, sorry. But regardless, I believe you may need newer daten files.

04-06-2012, 10:37 PM	#10
mot Captain Drives: e92 AW M3 6MT Join Date: Oct 2010 Location: Bay Area, California Posts: 862 iTrader: (8)	I was using v45

04-07-2012, 08:22 AM	#12
mot Captain Drives: e92 AW M3 6MT Join Date: Oct 2010 Location: Bay Area, California Posts: 862 iTrader: (8)	I would like to diagnose the car using INPA though.

04-07-2012, 09:48 AM	#13
cn555ic The Coding Guy Drives: FBO 335i Vert meth/nitrous Join Date: Jun 2007 Location: Brooklyn, New York Posts: 17,859 iTrader: (5)	It's weird. When I first installed INpa my lights would work fine with my Old IBM laptop. When connected battery light would just light up and when ignition was turned on the ignition would then also log black which is normal. Installed on a new laptop and now when I am just connected with no ignition the battery light does not come on, but when I turn ignition on both circles turn black. Connection is perfect but it just doesn't light up the connection circles like before. Weird __________________ *CODING BMWs in N.Y Area 917-939-4980* Call or Text for more INFO

05-23-2012, 12:11 AM	#15
melloww22 Second Lieutenant Drives: 2011 335i E90 Join Date: Apr 2011 Location: San Diego Posts: 283 iTrader: (1)	Errors INPA I received two errors when trying to read the airbag function... Error1: "versions do not match" Error2 Pops right after error 1: "language variants do not match " I am using INPA v5.02 , EDIABAS v6.4.7 , with Daten SP-V45-E89 I have a 2011 April build 335 e90, last year i had the dealer perform the Power Perfromance Kit. Is it telling me that my car was tuned using a newer/older version of INPA? What is the next step? Thank you in advance for your help in this matter... Last edited by melloww22; 05-23-2012 at 12:27 AM.

05-23-2012, 11:48 AM	#17
melloww22 Second Lieutenant Drives: 2011 335i E90 Join Date: Apr 2011 Location: San Diego Posts: 283 iTrader: (1)	Mixed Success!! I was able to do the following: CAS: BC_DIGITAL_V CAS: DIGITAL_KVA CAS: BC_DIGITAL_V_KORREKTUR KOMBI: KOMFORTSCHLIESSUNG_FB KOMBI: LEGAL_DISCLAIMER_TIME KOMBI: NAVI_FUELSTOP_PROPOSAL however I wanted to code: FRM (NFRM) LH_UND_NSW_NICHT_GLEICHZ FRM (NFRM) FL_UND_NSW_NICHT_GLEICHZ I was unable to read the NFRM. I received the following errors: COAPI-2000: EDIABAS or SGBD error BIP-0009: BEST VERSION ERROR Here is the error log: ERROR! Modul: LFCDHDIA.CPP (A_PL2FRX.IPS/IPO), Proc: CDHapiResultText, LineNr: 01, ErrorNr: 2000 COAPI-2000: EDIABAS or SGBD error BIP-0009: BEST VERSION ERROR Any guideance is greatly appreciated... ____ EDIT: I think it has to do with having newer daten files and 6.4.7 wont read them correctly, I am going to try using EDIABAS 7.2.0. Last edited by melloww22; 05-23-2012 at 12:05 PM.

05-23-2012, 12:15 PM	#18
Coding@DetailAddict BimmerPost Supporting Vendor Drives: 2007 335i E92 (SGM) Join Date: May 2011 Location: 1600 Wyatt Dr. Ste. 16, Santa Clara CA Posts: 3,032 iTrader: (12) Garage List 2007 BMW 335i E92 [3.79]	^update your daten and ediabas __________________ █ Click HERE for Info & Pricing █

05-23-2012, 10:40 PM	#19
melloww22 Second Lieutenant Drives: 2011 335i E90 Join Date: Apr 2011 Location: San Diego Posts: 283 iTrader: (1)	installing smart tools 2.11 resolved my problem...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search