KW coilovers pictures - Page 3 - BMW 3-Series (E90 E92) Forum

Fozzy · 05-29-2012, 07:31 PM

Quote:

Originally Posted by GreekboyD

I forget what but there's one part of the alignment process that they can't do.

I'm going for another one there (did it a year ago after my drop), but it's been pulling for a while so I either hit a pothole or they didn't get it quite right. I still likely the diligence and quality by Pat.

They can't do active steering.

Love the drops too guys. especially the xdrives

SG07 · 05-29-2012, 09:06 PM

I like this drop! How much of a drop is this (in terms of measurements)?

Quote:

Originally Posted by abhishriv

here are the pics i took.. some before and after for you guys! the first 2 are BEFORE the last 2 are AFTER

abhishriv · 05-29-2012, 09:39 PM

Quote:

Originally Posted by SG07

I like this drop! How much of a drop is this (in terms of measurements)?

i would say probably around 1.25" - 1.5" drop all around. i just told them i want the top of the tire to meet the fender line in the front without rubbing issues. i'll probably raise it up a touch though once it settles

Bladerunner · 05-30-2012, 12:59 PM

Here's mine, question for the experts. Will it affect the xi suspension or handling if I raised just the back a little, I wanted to add some spacers so the tires stick out for a more agressive look!

Kyter · 05-30-2012, 03:10 PM

Bladerunner, your car looks great man c;

Bladerunner · 05-30-2012, 03:20 PM

Quote:

Originally Posted by Kyter

Bladerunner, your car looks great man c;

Tks man...hey did you toolkit only include one adjustable tool as well? I thought the rears required a different one.

Kyter · 05-30-2012, 03:26 PM

I'm not sure. I can check when I get home. I've only opened it once to glance at it. The install was all Rocco while I was at work.

Dr. G · 05-30-2012, 03:31 PM

Quote:

Originally Posted by Bladerunner

Tks man...hey did you toolkit only include one adjustable tool as well? I thought the rears required a different one.

Hey man, I think your drop looks grreat! Very similar to mine. I have the same dilemma as well, I want to put more aggressive spacers in the rear, but I'm about 2mm away from rubbing unless I raise the rear a bit and maybe throw in another bumpstop, my car's probably just a tiny bit lower than yours and right now no rubbing issues.

I don't think you'll notice any tangible difference in handling with the spacers unless your a track monster, just go for it. The cars new so I don't know if you wanna roll the fenders, but I most likely will end up getting mine rolled by a guy I know and throw in a 12mm spacer.

Dr. G · 05-30-2012, 03:35 PM

Quote:

Originally Posted by abhishriv

i would say probably around 1.25" - 1.5" drop all around. i just told them i want the top of the tire to meet the fender line in the front without rubbing issues. i'll probably raise it up a touch though once it settles

If it doesn't get much lower when it settles just leave it! Looks great!
If you're worried about scraping, the only thing i scrape is those rubber things under the bumper and the jack points. If you just take things slow on speedbumps you'll be fine!

If you enter/exit steep driveways though that's a whole new story.

DESI4life10 · 05-30-2012, 03:42 PM

Quote:

Originally Posted by Bladerunner

Tks man...hey did you toolkit only include one adjustable tool as well? I thought the rears required a different one.

Congrats bro...Ride looks sick.

Raising the rear a bit will be fine. It will settle a little more anyways.

also the adjustment wrench is different in the rear and fron. One of them is bigger i believe.

CuriousIndian · 05-30-2012, 03:50 PM

Quote:

Originally Posted by Bladerunner

Here's mine, question for the experts. Will it affect the xi suspension or handling if I raised just the back a little, I wanted to add some spacers so the tires stick out for a more agressive look!

I like the drop. How much is it?

Bladerunner · 05-30-2012, 03:51 PM

Quote:

Originally Posted by DESI4life10

Congrats bro...Ride looks sick.

Raising the rear a bit will be fine. It will settle a little more anyways.

also the adjustment wrench is different in the rear and fron. One of them is bigger i believe.

cool tks, I may just do that! I think the v3 or v2 have 2 different wrenches. I called RMP about the missing wrench and they said it only came with one..

Quote:

Originally Posted by Kyter

I'm not sure. I can check when I get home. I've only opened it once to glance at it. The install was all Rocco while I was at work.

Yeah let me know, tks

Quote:

Originally Posted by Dr. G

Hey man, I think your drop looks grreat! Very similar to mine. I have the same dilemma as well, I want to put more aggressive spacers in the rear, but I'm about 2mm away from rubbing unless I raise the rear a bit and maybe throw in another bumpstop, my car's probably just a tiny bit lower than yours and right now no rubbing issues.

I don't think you'll notice any tangible difference in handling with the spacers unless your a track monster, just go for it. The cars new so I don't know if you wanna roll the fenders, but I most likely will end up getting mine rolled by a guy I know and throw in a 12mm spacer.

yeah I'm looking to add some spacers so I may raise it a bit. I like the agressive look of some of the old school muscle cars that have the back end up higher! Maybe 10's in the back and 8 in the front

DESI4life10 · 05-30-2012, 03:52 PM

I have 2 wrenches for my kw v1.

Maybe the changed the design.

wanlong · 05-30-2012, 04:09 PM

the front doesnt need a wrench, jack it up, release the small nut and u can spin it by hand.

Fozzy · 05-30-2012, 10:46 PM

Quote:

Originally Posted by Bladerunner

Here's mine, question for the experts. Will it affect the xi suspension or handling if I raised just the back a little, I wanted to add some spacers so the tires stick out for a more agressive look!

The short answer is yes as it will give it more rake and the weight distribution will be off. I had to do this to mine to clear me underground parking without scraping. However, it still handles way better than without the KW so it's not that bad or noticeable to someone who doesn't track the car.

SG07 · 05-31-2012, 02:49 PM

can you guys still go into car washes with this drop?

abhishriv · 06-01-2012, 02:58 PM

only one wrench with my v2

SG07 · 06-01-2012, 05:06 PM

Bladerunner - did you install yours at RMP?

e9012345 · 06-03-2012, 11:56 AM

what made you guys not opt for the cheap H&R Cup Kit that gives you the same drop? What about the cheaper ST kit?

itrocks4u · 06-03-2012, 03:30 PM

Quote:

Originally Posted by e9012345

what made you guys not opt for the cheap H&R Cup Kit that gives you the same drop? What about the cheaper ST kit?

ST kit = possibility of rusting

Cheap will always remain cheap so it's best not to cheap out on an important component like suspension.

abhishriv · 06-06-2012, 03:49 PM

i just came here to quickly vent about stupid downtown toronto parking lots! some of their driveways are so steep! i scraped the bottom of my front lip ATLEAST 5 times this past weekend going in and out of lots.

oh well... i guess its a little trade off for the better looking stance. still loving the kw v2s though!

itrocks4u · 06-06-2012, 05:15 PM

Quote:

Originally Posted by abhishriv

i just came here to quickly vent about stupid downtown toronto parking lots! some of their driveways are so steep! i scraped the bottom of my front lip ATLEAST 5 times this past weekend going in and out of lots.

oh well... i guess its a little trade off for the better looking stance. still loving the kw v2s though!

How low are you?

N/m. Just saw pics lol

05-30-2012, 12:59 PM	#48
Bladerunner Lieutenant Drives: 2011 e92 335xi Join Date: Mar 2009 Location: mississauga Posts: 559 iTrader: (6)	Here's mine, question for the experts. Will it affect the xi suspension or handling if I raised just the back a little, I wanted to add some spacers so the tires stick out for a more agressive look! Attached Images

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

05-30-2012, 03:10 PM	#49
Kyter Second Lieutenant Drives: E90 328xi 11' Join Date: Jan 2012 Location: Missisauga, Ontario Posts: 267 iTrader: (3) Garage List 2011 328xi [5.00]	Bladerunner, your car looks great man c;

05-30-2012, 03:26 PM	#51
Kyter Second Lieutenant Drives: E90 328xi 11' Join Date: Jan 2012 Location: Missisauga, Ontario Posts: 267 iTrader: (3) Garage List 2011 328xi [5.00]	I'm not sure. I can check when I get home. I've only opened it once to glance at it. The install was all Rocco while I was at work.

05-30-2012, 03:52 PM	#57
DESI4life10 Brigadier General Drives: Coding: Desi4life10@gmail.com Join Date: Oct 2008 Location: West of Toronto, Canada Posts: 3,369 iTrader: (18)	I have 2 wrenches for my kw v1. Maybe the changed the design.

05-30-2012, 04:09 PM	#58
wanlong First Lieutenant Drives: 2011 e92 lci Join Date: Mar 2010 Location: GTA Posts: 357 iTrader: (7)	the front doesnt need a wrench, jack it up, release the small nut and u can spin it by hand.

05-31-2012, 02:49 PM	#60
SG07 Second Lieutenant Drives: E90 Join Date: Apr 2010 Location: Toronto, Canada Posts: 255 iTrader: (0)	can you guys still go into car washes with this drop?

06-01-2012, 02:58 PM	#61
abhishriv Major Drives: 2007 335i Coupe (Space grey) Join Date: Oct 2011 Location: Toronto Posts: 1,095 iTrader: (0)	only one wrench with my v2

06-01-2012, 05:06 PM	#62
SG07 Second Lieutenant Drives: E90 Join Date: Apr 2010 Location: Toronto, Canada Posts: 255 iTrader: (0)	Bladerunner - did you install yours at RMP?

06-03-2012, 11:56 AM	#63
e9012345 First Lieutenant Drives: e90 Join Date: Feb 2012 Location: North York Posts: 356 iTrader: (0)	what made you guys not opt for the cheap H&R Cup Kit that gives you the same drop? What about the cheaper ST kit?

06-06-2012, 03:49 PM	#65
abhishriv Major Drives: 2007 335i Coupe (Space grey) Join Date: Oct 2011 Location: Toronto Posts: 1,095 iTrader: (0)	i just came here to quickly vent about stupid downtown toronto parking lots! some of their driveways are so steep! i scraped the bottom of my front lip ATLEAST 5 times this past weekend going in and out of lots. oh well... i guess its a little trade off for the better looking stance. still loving the kw v2s though!