Turning of "BRAKE" light in instrument cluster - BMW 3-Series (E90 E92) Forum

Chaser720 · 06-04-2012, 02:08 PM

After several trips to the dealership with no progress I still havn't figured out how to turn of the red BRAKE light on the instrument cluster. The dealership says its due to my brake pads needing to be replaced 30000 miles ago. The pads are fine and they can't figure out to turn it off.

Anyone know if there is a parameter that can be deactivated or another method to turn this damn thing off. Ha. It's been more than an annoyance over the last few years.

Thanks

e90TiAg335i · 06-04-2012, 08:20 PM

Is the brake sensor worn? You could always desolder the led...lol

idrift4wd · 06-04-2012, 08:43 PM

just clear it. (if your brakes are okay)

Jose_JN · 06-05-2012, 05:44 AM

Try to clear it as idrift4wd said.

But you have to have the pad sensors OK, if they are broken you have to change them or bridge the wire.

Regards

Chaser720 · 06-06-2012, 10:54 AM

I don't think it's the sensors. I'll try the reset but looking into it a little while ago it looked a lot like this problem. http://www.e90post.com/forums/showthread.php?t=638811

Any way to code out the condition based service lights?

crypticc · 06-07-2012, 10:09 AM

Quote:

Originally Posted by Chaser720

I don't think it's the sensors. I'll try the reset but looking into it a little while ago it looked a lot like this problem. http://www.e90post.com/forums/showthread.php?t=638811

Any way to code out the condition based service lights?

With it setting just after turning on the ignition, press control stalk, i think for a number of seconds. Look at some of my posts, there's a thread about it i went to. Do rear first, sometimes front won't work till rear is done

raceyBMW · 06-07-2012, 02:29 PM

I had this issue a while back. I was able to use the BT tool to get rid of it.

http://www.e90post.com/forums/showthread.php?t=370746

Chaser720 · 06-23-2012, 10:27 AM

Quote:

Originally Posted by raceyBMW

I had this issue a while back. I was able to use the BT tool to get rid of it.

http://www.e90post.com/forums/showthread.php?t=370746

Any way to clear it using INPA or something similar? Trying to avoid buying a BT.

raceyBMW · 06-24-2012, 01:47 PM

Probably, but I don't personally know how. Try the coding section, they may be able to help.

e90TiAg335i · 06-25-2012, 08:06 PM

Quote:

Originally Posted by Chaser720

Any way to clear it using INPA or something similar? Trying to avoid buying a BT.

Yes you can. Don't remember the exact steps to get to it but you're looking for reset CBS. Condition based service.

06-04-2012, 02:08 PM	#1
Chaser720 Private Drives: 07 335i Join Date: Apr 2009 Location: Columbia, SC Posts: 85 iTrader: (1)	Turning of "BRAKE" light in instrument cluster After several trips to the dealership with no progress I still havn't figured out how to turn of the red BRAKE light on the instrument cluster. The dealership says its due to my brake pads needing to be replaced 30000 miles ago. The pads are fine and they can't figure out to turn it off. Anyone know if there is a parameter that can be deactivated or another method to turn this damn thing off. Ha. It's been more than an annoyance over the last few years. Thanks
	Tweet

06-04-2012, 08:20 PM	#2
e90TiAg335i Captain Drives: 10 e90 335i Join Date: Mar 2010 Location: jacksonville, FL Posts: 839 iTrader: (4) Garage List 2010 e90 335i [0.00]	Is the brake sensor worn? You could always desolder the led...lol __________________ JB4, BMS DCI, DP, VMR V710, Sonic Tuning S1 coilovers, 20%tint, 35% wndshld - Hybrid Ovations, Soundsplinter 10" and Zapco DC Ref amps, white gauge cluster

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-04-2012, 08:43 PM	#3
idrift4wd Colonel Drives: Three Hundred and Thirty Five Join Date: Jul 2010 Location: Yonkers NY Posts: 2,580 iTrader: (0) Garage List 2007 BMW [3.25]	just clear it. (if your brakes are okay)

06-05-2012, 05:44 AM	#4
Jose_JN Private First Class Drives: e93 330d Join Date: May 2011 Location: http://www.youtube.com/josejjn Posts: 143 iTrader: (0)	Try to clear it as idrift4wd said. But you have to have the pad sensors OK, if they are broken you have to change them or bridge the wire. Regards

06-06-2012, 10:54 AM	#5
Chaser720 Private Drives: 07 335i Join Date: Apr 2009 Location: Columbia, SC Posts: 85 iTrader: (1)	I don't think it's the sensors. I'll try the reset but looking into it a little while ago it looked a lot like this problem. http://www.e90post.com/forums/showthread.php?t=638811 Any way to code out the condition based service lights?

06-07-2012, 02:29 PM	#7
raceyBMW king of the hills Drives: 335i coupe Join Date: Dec 2006 Location: Denver, CO Posts: 2,480 iTrader: (1) Garage List 1994 530i [4.25] 2007 335i Coupe [4.07]	I had this issue a while back. I was able to use the BT tool to get rid of it. http://www.e90post.com/forums/showthread.php?t=370746

06-24-2012, 01:47 PM	#9
raceyBMW king of the hills Drives: 335i coupe Join Date: Dec 2006 Location: Denver, CO Posts: 2,480 iTrader: (1) Garage List 1994 530i [4.25] 2007 335i Coupe [4.07]	Probably, but I don't personally know how. Try the coding section, they may be able to help.