e90 LCI VB3 Wheel & Tire Size Help

GermanMuscle · 05-13-2012, 11:42 PM

So I have decided I want the 19inch VMR VB3 CSL Hyper black, but can someone tell me what will be the best setup with the H&R touring kit without rubbing or fender roll?

edirtaynine · 05-14-2012, 12:02 AM

no rub and/or no fender roll = NOT aggressive at all

dtea604 · 05-14-2012, 02:03 AM

+1 to what he said, closest i can think would be 19x8.5 maybe 9 if they have it in that size it also depends on the offset. in the front and 19x10 in the rear for the vb3.

ModBargains.com · 05-14-2012, 11:15 AM

The setup that is recommended is the 19x8.5 ET40 with a 235/35/19 up front and the 19x9.5 ET45 with a 265/30/19 in the rear for the E90 LCI. This will not require you to roll your fenders or cause any rubbing issues even if the car is lowered.

VMRWheels · 05-14-2012, 11:59 AM

Quote:

Originally Posted by **********s.com

The setup that is recommended is the 19x8.5 ET40 with a 235/35/19 up front and the 19x9.5 ET45 with a 265/30/19 in the rear for the E90 LCI. This will not require you to roll your fenders or cause any rubbing issues even if the car is lowered.

wdeerfield · 05-14-2012, 02:57 PM

et +40 may "work" but mine in 18 rubbed with 235s on the inside. its best to get 8.5 et35

GermanMuscle · 05-16-2012, 01:59 AM

Anyone have this setup or similar, any rubbing or needs fender rolling?

Front - 19x8.5 et 35 with 235/35/19
Rear - 19x9.5 et 33 with 265/30/19
Tires - Hankook v12s
Drop - H&R touring cup kit

remmib · 05-16-2012, 04:39 AM

^Front is fine, rear will be close on an e90 LCI.

Marc R · 05-16-2012, 05:30 AM

Are the offsets for E90 and E91 the same?

bmw325i · 05-16-2012, 08:26 AM

Quote:

Originally Posted by YOLO!

Anyone have this setup or similar, any rubbing or needs fender rolling?

Front - 19x8.5 et 35 with 235/35/19
Rear - 19x9.5 et 33 with 265/30/19
Tires - Hankook v12s
Drop - H&R touring cup kit

Rears are a little close because of the 8mm wider track on the lci. If it rubs you can just add some negative camber. You should consider 9.5 et33 square. You'll still need to use a 235 up front to clear the strut.

D_Smiderreen · 05-16-2012, 08:44 AM

Quote:

Originally Posted by YOLO!

Anyone have this setup or similar, any rubbing or needs fender rolling?

Front - 19x8.5 et 35 with 235/35/19
Rear - 19x9.5 et 33 with 265/30/19
Tires - Hankook v12s
Drop - H&R touring cup kit

Don't know if it makes that big off a difference, but I am running the same offset with 275/30/19 and it rubs like crazy. I definatley need a roll.

GermanMuscle · 05-16-2012, 10:53 AM

I did some searching last night and found one person who is running this setup without rubbing:

Front: 19x8.5 et35 with 235/35/19 with 5mm spacer
Rear: 19x9.5 et45 with 265/30/19 with 12mm spacer
Tires: Conti DWs

GermanMuscle · 05-16-2012, 10:54 AM

Is there a difference between 19x9.5 et33 and 19x9.5 et45 with 12mm spacer?

ModBargains.com · 05-16-2012, 01:15 PM

Quote:

Originally Posted by YOLO!

Is there a difference between 19x9.5 et33 and 19x9.5 et45 with 12mm spacer?

In the end they both come down to the ET33. It's better to go with the ET45 as that will give you the option to run spacers if you'd like to push it out further. Going straight with the ET33 will give you an aggressive fitment and you cannot do anything to make them less aggressive.

GermanMuscle · 06-14-2012, 05:06 PM

Anyone have this setup on a LCI?

19x8.5 et40 with 235/35/19
19x10 et38 with 265/30/19 or 275/30/19

VMRWheels · 06-15-2012, 01:21 PM

Quote:

Originally Posted by BimmerPower

Anyone have this setup on a LCI?

19x8.5 et40 with 235/35/19
19x10 et38 with 265/30/19 or 275/30/19

Sorry, I couldn't find pictures of this setup for some reason. It'll work, you'll need a fender roll though. You'll probably rub on big bumps depending on your suspension.

GermanMuscle · 06-15-2012, 02:21 PM

Quote:

Originally Posted by VMRWheels

Sorry, I couldn't find pictures of this setup for some reason. It'll work, you'll need a fender roll though. You'll probably rub on big bumps depending on your suspension.

Here I found a thread who is running 19x10 et38 in the rear without rubbing. Which means it should work for me too because I don't think this person roll his fenders too, correct?

http://www.e90post.com/forums/showthread.php?t=271622

VMRWheels · 06-15-2012, 08:39 PM

Quote:

Originally Posted by BimmerPower

Here I found a thread who is running 19x10 et38 in the rear without rubbing. Which means it should work for me too because I don't think this person roll his fenders too, correct?

http://www.e90post.com/forums/showthread.php?t=271622

Nice find! I think he might have his fenders rolled based on the photo below. The 19x10 +38 is a good solid fit on the pre-lci E90. Since the LCI changed their rear wheel base, it'll be a bit aggressive for most people. However, base on the photos it doesn't look like he rubs at all. All things considered, I'm sure you won't rub if you roll your fenders a bit.

Poison Dwarf · 06-17-2012, 02:21 AM

Quote:

Originally Posted by Marc R

Are the offsets for E90 and E91 the same?

I was going to ask that... anyone?

bmw325i · 06-17-2012, 11:55 AM

19x9.5et33 up front with a 235/35
19x10et 38 with a 265/30

slight roll in the rear if needed.

05-13-2012, 11:42 PM	#1
GermanMuscle Once you drive a Bimmer, you always drive a Bimmer Drives: 2011 e90 Join Date: May 2012 Location: Atlanta Posts: 257 iTrader: (1)	e90 LCI VB3 Wheel & Tire Size Help So I have decided I want the 19inch VMR VB3 CSL Hyper black, but can someone tell me what will be the best setup with the H&R touring kit without rubbing or fender roll? Last edited by GermanMuscle; 05-14-2012 at 02:18 AM.
	0 Tweet

05-14-2012, 02:57 PM	#6
wdeerfield A family of bimmers Drives: 2009 e90 2011 f10 Join Date: Jan 2012 Location: Clifton Park, NY Posts: 2,970 iTrader: (0)	et +40 may "work" but mine in 18 rubbed with 235s on the inside. its best to get 8.5 et35 __________________ 2009 MBM 328\| ZPP \| ZSP \| ZCW \| CA \| 6FL \| NAV \| XENONS \| 18x8.5 VB3s ET30/25 2011 Jet Black 535i xdrive \| ZPP \| ZSP \| ZCW \| 6FL \| NAV \| 331s Square
	0

05-16-2012, 04:39 AM	#8
remmib General Drives: 2013 F10 520d M-Sport Join Date: Feb 2006 Location: Norway Posts: 25,940 iTrader: (0)	^Front is fine, rear will be close on an e90 LCI. __________________ F10 520d M-Sport Alpine White \| HRE P43SC 20x9+20x11 \| Michelin PSS 255/35+295/30 \| KW V3 Coilover \| M5 Front Sway Bar + M550d Rear Sway Bar \| 3D Design Front Lip \| BMW M Performance CF Spoiler \| BMW M Performance Diffuser \| BMW M Performance Black Grills \| BMW M Performance Pedals \|
	0

05-16-2012, 05:30 AM	#9
Marc R Mr Anderson,we've been expecting you... Drives: 335i Touring Join Date: May 2012 Location: Dept. of Justice Posts: 117 iTrader: (0)	Are the offsets for E90 and E91 the same? __________________ 335i Touring, Le Mans Blue, Oyster, Procede, Riss Racing DP's,19" Miro111's....catback performance exhaust Audi S8 V10 no mods
	0

05-16-2012, 10:53 AM	#12
GermanMuscle Once you drive a Bimmer, you always drive a Bimmer Drives: 2011 e90 Join Date: May 2012 Location: Atlanta Posts: 257 iTrader: (1)	I did some searching last night and found one person who is running this setup without rubbing: Front: 19x8.5 et35 with 235/35/19 with 5mm spacer Rear: 19x9.5 et45 with 265/30/19 with 12mm spacer Tires: Conti DWs Attached Images
	0

05-14-2012, 12:02 AM	#2
edirtaynine Major General Drives: e92 Join Date: Mar 2011 Location: SoCal Posts: 6,094 iTrader: (0)	no rub and/or no fender roll = NOT aggressive at all
	0

05-14-2012, 02:03 AM	#3
dtea604 Lieutenant Drives: 06 E90 325i Join Date: Jan 2012 Location: Vancouver Posts: 445 iTrader: (0)	+1 to what he said, closest i can think would be 19x8.5 maybe 9 if they have it in that size it also depends on the offset. in the front and 19x10 in the rear for the vb3.
	0

05-14-2012, 11:15 AM	#4
ModBargains.com Banned Drives: JB E92 335i Join Date: Feb 2008 Location: 1721 E. Lambert Rd #C, La Habra, CA 90631 Posts: 13,594 iTrader: (51)	The setup that is recommended is the 19x8.5 ET40 with a 235/35/19 up front and the 19x9.5 ET45 with a 265/30/19 in the rear for the E90 LCI. This will not require you to roll your fenders or cause any rubbing issues even if the car is lowered.
	0

05-16-2012, 01:59 AM	#7
GermanMuscle Once you drive a Bimmer, you always drive a Bimmer Drives: 2011 e90 Join Date: May 2012 Location: Atlanta Posts: 257 iTrader: (1)	Anyone have this setup or similar, any rubbing or needs fender rolling? Front - 19x8.5 et 35 with 235/35/19 Rear - 19x9.5 et 33 with 265/30/19 Tires - Hankook v12s Drop - H&R touring cup kit
	0

05-16-2012, 10:54 AM	#13
GermanMuscle Once you drive a Bimmer, you always drive a Bimmer Drives: 2011 e90 Join Date: May 2012 Location: Atlanta Posts: 257 iTrader: (1)	Is there a difference between 19x9.5 et33 and 19x9.5 et45 with 12mm spacer?
	0

06-14-2012, 05:06 PM	#15
GermanMuscle Once you drive a Bimmer, you always drive a Bimmer Drives: 2011 e90 Join Date: May 2012 Location: Atlanta Posts: 257 iTrader: (1)	Anyone have this setup on a LCI? 19x8.5 et40 with 235/35/19 19x10 et38 with 265/30/19 or 275/30/19
	0

06-17-2012, 11:55 AM	#20
bmw325i Brigadier General Drives: 2006 BMW 325i Join Date: Oct 2010 Location: United States Posts: 3,956 iTrader: (5)	19x9.5et33 up front with a 235/35 19x10et 38 with a 265/30 slight roll in the rear if needed. __________________ 2006 BMW 325i Titanium Silver Mods- 19" AG M310's hypersilver, LCI xenons, drilled and slotted rotors, OEM rear spoiler, OEM exhaust tips, brushed black interior trim, Viper 5904 alarm + remote start Audio upgrades- Alpine S920HD, JL XD600/6, Jehnert XE200, Morel Hybrid Ovation II, Audioque 2200D, 2 Alpine SWR 12d4's (forward facing sealed from trunk)
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search