Cable - BMW 3-Series (E90 E92) Forum

SayHello · 02-07-2012, 06:54 AM

Hi Guys,

Been reading quite alot here, trying to get EDIABAS & INPA working for diagnostics.

Trying to run on 2008 BMW 328i E93 -

Got everything set with INPA and EDIABAS, variables etc..

However I'm thinking it might be the cable I got..

http://www.ebay.com/itm/170775059289

Do I need K-CAN + D-CAN, or that cable should work?

Also, at device manager there is no choice for latency. See screenshot -
http://s15.postimage.org/na6ee4k1m/bmw.jpg

Thanks!

ctuna · 02-07-2012, 11:11 AM

To get to the screen where com port number and the latency setting are shown.

SayHello · 02-11-2012, 08:56 AM

Ah, my bad. Posted wrong screenshot.

However in advanced there are still no selection for latency.

Mad Hatter · 02-11-2012, 09:05 AM

you need a DCAN cable for 08 models, K-CAN +DCAN should work as well. I learned it the hard way by buying a DCAN cable for my 06 E90, only to find out that 06 and 07 models made before march only work with K-CAN cable.

You should be able to adjust latency after installing the cable driver, if its still not an option you probably have a newer driver and don't need to worry about it.

SayHello · 06-16-2012, 10:23 PM

bump, ;p

Still having same issue...

cn555ic · 06-16-2012, 11:13 PM

You need to goto advanced to get that menu for latency

02-07-2012, 06:54 AM	#1
SayHello New Member Drives: BMW Join Date: Dec 2011 Location: Howell, NJ Posts: 5 iTrader: (0)	Cable Hi Guys, Been reading quite alot here, trying to get EDIABAS & INPA working for diagnostics. Trying to run on 2008 BMW 328i E93 - Got everything set with INPA and EDIABAS, variables etc.. However I'm thinking it might be the cable I got.. http://www.ebay.com/itm/170775059289 Do I need K-CAN + D-CAN, or that cable should work? Also, at device manager there is no choice for latency. See screenshot - http://s15.postimage.org/na6ee4k1m/bmw.jpg Thanks!
	Tweet

02-07-2012, 11:11 AM	#2
ctuna Colonel Drives: 325xi 06 wagon MT Join Date: Jan 2010 Location: Santa Cruz, Ca Posts: 2,740 iTrader: (0)	You have to click on the Advanced Tab/button To get to the screen where com port number and the latency setting are shown.

06-16-2012, 11:13 PM	#6
cn555ic The Coding Guy Drives: FBO 335i Vert meth/nitrous Join Date: Jun 2007 Location: Brooklyn, New York Posts: 17,872 iTrader: (5)	You need to goto advanced to get that menu for latency __________________ *CODING BMWs in N.Y Area 917-939-4980* Call or Text for more INFO

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-11-2012, 08:56 AM	#3
SayHello New Member Drives: BMW Join Date: Dec 2011 Location: Howell, NJ Posts: 5 iTrader: (0)	Ah, my bad. Posted wrong screenshot. However in advanced there are still no selection for latency.

02-11-2012, 09:05 AM	#4
Mad Hatter New Member Drives: 2006 BMW 330i Join Date: Feb 2012 Location: Boston, MA Posts: 5 iTrader: (0)	you need a DCAN cable for 08 models, K-CAN +DCAN should work as well. I learned it the hard way by buying a DCAN cable for my 06 E90, only to find out that 06 and 07 models made before march only work with K-CAN cable. You should be able to adjust latency after installing the cable driver, if its still not an option you probably have a newer driver and don't need to worry about it.

06-16-2012, 10:23 PM	#5
SayHello New Member Drives: BMW Join Date: Dec 2011 Location: Howell, NJ Posts: 5 iTrader: (0)	bump, ;p Still having same issue...