Sponsored by The Tire Rack

[Archangel335]

Originally Posted by Archangel335

Am considering a set of 360Forged Spec 5. 19x9 ET28 for the fronts and 19x10 ET25 for the rears...basically M3 offset.

If I am gonna lowered the car with KW V2 and slightly roll the rear fenders, will I be able to fit 235/35/19 fronts and 265/30/19 rears? From what I have read so far it should be ok, but I just wanna be safe.

An also.....What's the widest tire I can go? Opinions appreciated.

Anyone can help please??

[Dr. G]

Originally Posted by Archangel335

Am considering a set of 360Forged Spec 5. 19x9 ET28 for the fronts and 19x10 ET25 for the rears...basically M3 offset.

If I am gonna lowered the car with KW V2 and slightly roll the rear fenders, will I be able to fit 235/35/19 fronts and 265/30/19 rears? From what I have read so far it should be ok, but I just wanna be safe.

An also.....What's the widest tire I can go? Opinions appreciated.

Fronts will be fine. Roll the rear fenders properly and the rear should be fine as well.

[Peter@VMRWheels]

With 19x10 ET25 and 265/30/19, the rear fenders will need quite a bit of rolling work; you might even need to flare it out a bit.

My lowered e92 coupe needed a little work to fit 275/30/19 on 19x10 ET38, your target fitment is around 8mm more aggressive (13mm on the offset -5mm on the narrower tire).

[Archangel335]

Thanks guys. I do not mind some fender rolling...but would not want to flare and so any major work.

Would having a little camber help? Say 2 degrees?

[imperial sloth]

gonna run 18x9.5 et28 on the rear with a michelin pilot ss 265/35/18... will post pics hopefully will help some of these guys stradling et30 offset on stock e92 suspension...

[Cloudx71]

Would 18x9 et29 fit for all 4? I figure I can stagger slightly hopefully. What tire size should I run? I'm open to rolling the fenders as well as getting coils. This is for a coupe btw. Thanks!

[Hey Ant]

New Setup with no spacers!

BBS CH:
19x8.5 +20 Hankook V12 - 235/35/19
19x10 +20 Hankook V12 - 265/30/19

[blakonblak]

What kind of fender work would you need to do for these?

20x9 ET20
20x10.5 ET27

Trying to get these Vossens to fit my e92 coupe

[BlackBB6]

I just wanted to give some information on what i'm running now.

On my E92
I have VMR V701's in:
19 x 8.5 +33 offset with 235/35/19
19 x 9.5 +22 offset with 245/35/19

Sport Package suspension

Rear fenders rolled about 10mm before I put them on. I haven't heard any rubbing yet, we have some pretty rough speed bumps at work too.

I want to step up to 245 and 255 when these tires run out.

[daparty]

Sorry, searched through this but just wanted to double check. Would this fit without any mods on an e92 and if so, would it be flush/near flush? Thanks!

Front Wheels 19x8.5, +35 mm Offset with a 1.5 " lip
235/35R19 BFGoodrich KDW2 Tires

Rear Wheels 19x9.5, +40 mm Offset with a 2.5 inch lip
265/30R19 BFGoodrich KDW2 Tires

[remmib]

Originally Posted by daparty

Sorry, searched through this but just wanted to double check. Would this fit without any mods on an e92 and if so, would it be flush/near flush? Thanks!

Front Wheels 19x8.5, +35 mm Offset with a 1.5 " lip
235/35R19 BFGoodrich KDW2 Tires

Rear Wheels 19x9.5, +40 mm Offset with a 2.5 inch lip
265/30R19 BFGoodrich KDW2 Tires

Yes, will fit without mods, but not really flush.

[will.c]

i don't know if this has been mentioned, i didn't have time to read all 22 pages, but here's my notable contribution:

E92, RWD, stock sport sus., -2deg front camber with pins removed and M3 arms
265/35/18 Hankook V12s on 189 rears wheels (18x8.5 ET37) at the FRONT, no rubbing, no problem at all.

i think the V12s run thinner than typical.

[daparty]

Originally Posted by remmib

Yes, will fit without mods, but not really flush.

Thanks for the help man. Would this be possible to get flush with spacers without rubbing or is it more trouble than it'd be worth?

[WilliamLAdams]

Will these fit:

Front: 19x8.5 235/35/19 et20
Rear: 19x9.5 265/30/19 et20

Willing to make modifications.

[torquematters]

Hi, just to but in, I have an E92 335d msport and E92 325i se and there is about 10mm difference in ride height and the 325i se is quite soggy in comparison.

wheels and tyres on the 335d are
19x8.5 235/35/19 19x9.5 265/30/19 both ofset 35 without body mods and everybody has commented about the agressive stance it now has.
If you get too wide a tyre and the wrong ofset on the front it will tramline like hell. i made that mistake with a Z4, it ruined the cars feel.

[joehk8004]

Hi everyone, hope some of you can help me too! Am buying a set wheels for my E92 335i which is on coilover:

Front: 18x9.5 et20
Rear: 18x9.5 et20

Will they fit without any fender roll? What is the best tries size?

Many Thx in advance!!

[cslpower]

No.
front will rub but rear would be fine with a proper roll.
i would go with 245 on 9,5

[torquematters]

Hi Joe for your fronts to keep the same geometry you will need an ofset of 45 or you will upset the feel of the car. it may look good but you still need to be able to drive it.

[joehk8004]

Thx to cslpower and torquematters for the opinions!! So what is the best off set for 18x9.5 all round then [or i shouldn't go for 9.5 all round?]? front & rear tyres size?
Thank so much again!!

[MonacoBlueE90]

Here is one E92 with 19x9.5 et22 allround with 235/35/19

http://illmotion1.wordpress.com/2011...bmw-e92-328xi/

Another with 18x9.5 et22 front with 235/40/18

http://www.e90post.com/forums/showpo...1&postcount=14

I have E90 with 18x9.5 et35 front ,but that wont fit with coilovers.Wheel would hit coilovers spring perches.Need something like et30 or lower for clearance.

[joehk8004]

Thx alot folks!! I shall talk to the supplier again with those figures which supplied by you guys! I love this one how it look! http://www.e90post.com/forums/showpo...1&postcount=14

[conor.ireland360]

I'm totally new to this kind of thing guys and I'm just thinking can someone please put what each number is I.e stands for and what it is in very lay mans meanings thanks like what do all the numbers mean