[Eyeman]

My wallet fizzled out a few yrs back. I recently saw a post on some CF hoods being available, started to look, realized I couldn't afford it..lol. I guess what will get me going again is in a few yrs i'll need to replace some stock parts so then I'll replace with a modded part (rotors, battery, lights, maybe even the front bumper and mirrors, hood, etc.).

[Chuck]

Originally Posted by Eyeman

My wallet fizzled out a few yrs back. I recently saw a post on some CF hoods being available, started to look, realized I couldn't afford it..lol. I guess what will get me going again is in a few yrs i'll need to replace some stock parts so then I'll replace with a modded part (rotors, battery, lights, maybe even the front bumper and mirrors, hood, etc.).

Yeah - my wallet is in "recharge" mode at the moment. At least it gives me a chance to figure out what I really want to do.

[Trooper9009]

Originally Posted by ans1215

call brian at sun tinting, theyre in roswell on hembree road, hes one of the best, tell him al from united in roswell sent you

http://www.suntinting.com/

called him this morning,he quoted me $650 to wrap the roof top of my e92...that's way too much.

[tflo2000]

Who are the north GA/ATL Stretched tire gurus? I live in Chattanooga and need to mount some rims this weekend.

[Siciliano611]

Originally Posted by Trooper9009

called him this morning,he quoted me $650 to wrap the roof top of my e92...that's way too much.

To wrap it with black vinyl or 3m CF material?

[Trooper9009]

Originally Posted by Siciliano611

To wrap it with black vinyl or 3m CF material?

Glossy black Vinyl.

[Siciliano611]

Originally Posted by Trooper9009

Glossy black Vinyl.

Do you know if he had 3m CF material on hand too?

[Trooper9009]

Originally Posted by Siciliano611

Do you know if he had 3m CF material on hand too?

Not sure...I spoke to few other people in the area and were charging $75/hr and the job takes no more than 2 hrs.

[Siciliano611]

Originally Posted by Trooper9009

Not sure...I spoke to few other people in the area and were charging $75/hr and the job takes no more than 2 hrs.

Can you PM me who u spoke to with those prices? do u know if they do good work?

[bhbfalcons]

Originally Posted by Siciliano611

Can you PM me who u spoke to with those prices? do u know if they do good work?

If you are wraping a high end car you need to call The Color Spot - I am friends with the owner Mike Feldberg you can call him at 404-444-1220 if he does not answer leave a MSG and tell him you are looking to do a BMW i have sent a few other people over there.

He is one of the largest installers of 3m product in the south.

I have seen tons of wraps and his guys are the best out there. if you are doing a roof on a high end car like a M3 you dont want to have just anyone cutting on your car you want to make sure you someone who knows what they are doing and is not going to mess up your paint.

[Trooper9009]

Originally Posted by bhbfalcons

If you are wraping a high end car you need to call The Color Spot - I am friends with the owner Mike Feldberg you can call him at 404-444-1220 if he does not answer leave a MSG and tell him you are looking to do a BMW i have sent a few other people over there.

He is one of the largest installers of 3m product in the south.

I have seen tons of wraps and his guys are the best out there. if you are doing a roof on a high end car like a M3 you dont want to have just anyone cutting on your car you want to make sure you someone who knows what they are doing and is not going to mess up your paint.

he qouted $400..he was not sure if he can remove the Shark Fin and how to wrap it.

[adrean8j]

Ok BMW team my club is putting on a big show on the 15th July. I would love to see all of you there (lets show these JDM guys how Europe does the damn thang!)
You can call me at 843-597-6876 if you need more information or directions.

[ans1215]

Originally Posted by Trooper9009

called him this morning,he quoted me $650 to wrap the roof top of my e92...that's way too much.

yeah i dont know his prices, i just know he does excellent work.

Originally Posted by Siciliano611

Do you know if he had 3m CF material on hand too?

he always has it in stock, i get all my cf wrap for him for the interiors i do.

Originally Posted by Trooper9009

Not sure...I spoke to few other people in the area and were charging $75/hr and the job takes no more than 2 hrs.

i dont know who you called, but it takes much longer than 2 hours to do it right, meaning removing the shark fins and drip rail mouldings and tucking it under the windshield mouldings. the shark fin has to come off from the inside which requires removal, at least partially, of the headliner. all in all it should take anyone with experience at minimum 3hours if they are really good, or have multiple people working on it to about 4.5 hours. so just beware, you dont want your wrap starting to bubble and peel around the edges after 6 months.

[SpartanGA]

Headed up to the new Atlanta Motorsports Park in N. Georgia this afternoon. See you guys at the N. GA Outlets at 1pm?! I am bringing my 11 yo son and 2011 e93 M-sport

[Donia330i]

Hey, anyone in Atlanta know a great place to get an alignment?

[quads]

Originally Posted by Donia330i

Hey, anyone in Atlanta know a great place to get an alignment?

http://www.granturismoeast.com/

Tell kieran and jeff that david chow sent you

[AtlasDoc]

AMP was a blast today! We had 3 BMW clubs represented by about 15-20 cars. After our parade laps, several members took advantage of 20 minute full on hot laps for only $50!!! Everyone who skipped this event definitely missed out!!!

[CUTigers]

Wanted to go, but had to work at 2:30 :-(

[SpartanGA]

Very good times. Except when someone decided to stop mid turn for some reason.

3 wide on a road course so everyone could stop....!! everyone was safe however.

I got a tour of the kart track...that is going to be just awesome. Will definitely come back when it is ready and they have some karts to rent.

[Donia330i]

Originally Posted by 4sevens.com

http://www.granturismoeast.com/

Tell kieran and jeff that david chow sent you

thanks! i'll check them out.

[dce93atl]

I was so glad I decided to get up and go. I was tired from driving in the night before from Destin but I felt like I had to be there. It was a lot of fun. We did 5 parade laps and the surprise hot laps were incredible. There were two cars that had some trouble, an E46 may have blown out his SMG and an E36 had clutch trouble. But outside of that it was great fun and a great event.


This Saturday there will be a Bimmers and Coffee meet at Starbucks on Howell Mill Rd at 8AM. I plan to be there. I'm not the host, the host is from M3post and normally several E9X M3's show up. So if you can come on out and have some Coffee and see some nice BMW's.

[Xzach92X]

Originally Posted by Donia330i

thanks! i'll check them out.

Their an awesome shop i wont go anywhere else for suspension/tire problems