E90Post
 


PYSPEED
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > E93 coded Key FOB to open/close windows/mirrors and convertible top



Reply
 
Thread Tools Search this Thread
      07-04-2012, 06:47 PM   #1
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
E93 coded Key FOB to open/close windows/mirrors and convertible top

I have sucessfully coded to my car with NCSexpert to enable the key FOB to open/close the windows/mirrors/convertible top!! There has been alot of people looking to code this feature in without Comfort Access! With Comfort Access this function was already set to work, but not such an easy task without CA! I have finally after many attempts got it to work and coded my car to operate that is not equipped with COMFORT ACCESS!!!!! Here are the modules and script lines that I had to change. I have the original software for my car as it has never been updated! I am not sure if this will work with newer cars with software upgrades, but please try and get back to me to see if this works for you! There are not too many people that have coded this feature to work to open and close the convertible hardtop, I hope this will help others.



CAS MODULE (set both of these lines to aktiv)

KOMFORTSCHLIESSUNG_FB
FH_KOMFORTF_MIT_SUBST


CTM MODULE (all of these lines need to be set to aktiv, some may already be set to aktiv!) I am not sure its the same with CVM module..


KOMFORT_OEFFNEN_FBD
KOMFORT_LADE_POSITION
KOMFORT_SCHLIESS_FBD
SCHEIBEN_ANHEB_OEFF_FBD
SCHEIBEN_ANHEB_SCHL_FBD


NFRM MODULE

SPIEGEL_KOMFORT_EINKLAPP or ASP_KOMFORT_EINKLAPP

here is the video

__________________

Coding E and F New York 917-939-4980

Last edited by cn555ic; 07-06-2012 at 03:23 PM.
cn555ic is offline   United_States
0
Reply With Quote
      07-04-2012, 11:26 PM   #2
moreno1
Lieutenant
 
moreno1's Avatar
 
Drives: BMW 335i E93
Join Date: May 2009
Location: Montreal

Posts: 570
iTrader: (13)

Sick sick!! Wish I had an E93 :-(.
Thanks for sharing.
__________________
2009 335i E93 /// BSM /// Sport /// Premium /// Codings : bmwmtlcode@hotmail.com /// 313 Performance wheels /// M6 winter set /// 35% Tint /// Gloss Black Grills /// Painted reflectors /// Lux H8 V3 /// Interior LEDs /// JB4-DCI /// Combox & CIC Retrofit /// Aero lip & M3 side skirts ///
moreno1 is offline   Canada
0
Reply With Quote
      07-05-2012, 07:23 PM   #3
Elliott@DetailAddict
Brigadier General
 
Drives: E90
Join Date: May 2011
Location: Santa Clara, CA

Posts: 4,448
iTrader: (0)

Very awesome indeed. GREAT work.
Hope it works on current software levels though.
Elliott@DetailAddict is offline   United_States
0
Reply With Quote
      07-05-2012, 07:45 PM   #4
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
That's what I need to see. I already pm JordanE93. Hopefully he can test it out and get back to me with this. I am so happy I finally piece together info scattered all over the place and put it into one page, hopefully it works for others like it is working for my car, if not then its proof something in the software is preventing this from happening. If this works for other E93 CTM equipped cars, then we have gone a long way with this. With the Car equipped with the CVM module, there is alot more work to do as there are alot of WERT values in place of aktiv or nicht_aktiv.

I need someone to test it and see if it works. The last E93 that I have coded all have CA, so I didnt bother with it... It's so sweet to have this finally working, and I find myself opening the top more often
__________________

Coding E and F New York 917-939-4980

Last edited by cn555ic; 07-05-2012 at 11:28 PM.
cn555ic is offline   United_States
0
Reply With Quote
      07-06-2012, 04:52 AM   #5
JordanE93
Private
 
JordanE93's Avatar
 
Drives: BMW E93
Join Date: Aug 2011
Location: Essex

Posts: 77
iTrader: (0)

I will try your suggestions asap, unfortunately living in London its raining everyday at the moment so im not sure i'll have the opportunity tonight, so hopefully over the weekend... Looking forward to some good news
JordanE93 is offline   United Kingdom
0
Reply With Quote
      07-06-2012, 07:03 AM   #6
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Please if you can try it out as soon as possible it would be awesome to confirm if it works on a newer MY E93 Waiting to hear from you. Goto indoor parking garage for 10 minutes! Lol
__________________

Coding E and F New York 917-939-4980

Last edited by cn555ic; 07-06-2012 at 07:10 AM.
cn555ic is offline   United_States
0
Reply With Quote
      07-06-2012, 07:17 AM   #7
DESI4life10
Banned
 
DESI4life10's Avatar
 
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada

Posts: 3,365
iTrader: (18)

Going to try this on a buddies 2007 conv.

I tried some of these lines before with no luck but I I can see more lines had to be revised.

Once I get a chance to try it out, I will post back here.
DESI4life10 is offline   Canada
0
Reply With Quote
      07-06-2012, 08:07 AM   #8
onebadmofo
Banned
 
Drives: 2007 E92 335i
Join Date: Aug 2010
Location: Central NJ

Posts: 2,394
iTrader: (14)

Won't work on newer software.
I found the convertibles to be very finicky. The soft tops (1 series and 6) are the most annoying ones. You can make it open but not close.
onebadmofo is offline   Russian Federation
0
Reply With Quote
      07-06-2012, 08:19 AM   #9
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Desi. Yes please let me Know. Very curious to see it works on other cars! Showed my friends Yesterday and they were bugging out I got it to work!
__________________

Coding E and F New York 917-939-4980
cn555ic is offline   United_States
0
Reply With Quote
      07-06-2012, 08:33 AM   #10
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Quote:
Originally Posted by Andrey@AutoCouture View Post
Won't work on newer software.
I found the convertibles to be very finicky. The soft tops (1 series and 6) are the most annoying ones. You can make it open but not close.
Did u try those exact script lines I described to a E93?? I am speaking of only E93 and not the soft-top of the 1 series or 6 series. I am only putting it out there to try for E93s, As I know the softtop verts uses CVM module. All I know is that I got it to work on my car. Until people with newer software equipped E93s try these exact scripts to edit, I think it's too early to say until someone tries it that it won't work. All the threads I have seen on this, info was scattered all over the place. I narrowed down exactly what I did 100% and if it doesn't work then we will have concrete info. JoseJN had his working but wasn't exactly sure everything that he changed before his software got updated, I am 100% sure of what I edited to make it functional to open and close convertible hardtop with windows and mirrors with the key fob
__________________

Coding E and F New York 917-939-4980

Last edited by cn555ic; 07-06-2012 at 11:40 AM.
cn555ic is offline   United_States
0
Reply With Quote
      07-06-2012, 01:10 PM   #11
JordanE93
Private
 
JordanE93's Avatar
 
Drives: BMW E93
Join Date: Aug 2011
Location: Essex

Posts: 77
iTrader: (0)

No luck so far, i tried earlier today and couldn't get it to work... some of the tags were nicht so i changed them to aktiv but its still not doing it..

It now closes the windows if i hold the lock button which it didn't do before but not the roof...
I didnt check ASP_KOMFORT_EINKLAPP as i was going by your previous post... do you think that could make the difference?
JordanE93 is offline   United Kingdom
0
Reply With Quote
      07-06-2012, 01:16 PM   #12
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Please do all the items that I listed, Even the asp_komfort_einklapp


I am sad if this doesn't work for you, as it will confirm that new software will not allow this to happen . I am hoping otherwise still. Waiting to hear from Desi4life what happen with his attempt

Last edited by cn555ic; 07-06-2012 at 01:24 PM.
cn555ic is offline   United_States
0
Reply With Quote
      07-06-2012, 02:23 PM   #13
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Jordan. If you have coded everyone of those parameters that I have listed ontop, Then it's proven for sure about the software upgrade preventing this feature from happening. I am still puzzled to as why it would happen if you have those lines to edit, same as mine and it doesn't do anything. Very confused. I know the 1 series and 6 use a CVM module. I would like to hear from Desi and find out his outcome
__________________

Coding E and F New York 917-939-4980
cn555ic is offline   United_States
0
Reply With Quote
      07-06-2012, 02:47 PM   #14
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Nice find!, That's sick...Get you're Car topless without gettin in it!
Now i have a E90 without CA, i've coded the open/close all windows with keyfob, but correct me if i'm wrong i could make the mirrors close as well? Which module do i have to look for the mirrors? sorry for the Thread Jack lol but been away from coding for a while.
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      07-06-2012, 03:03 PM   #15
BES335xi
Colonel
 
BES335xi's Avatar
 
Drives: FBO+ N54xi
Join Date: Mar 2008
Location: Queens, NYC

Posts: 2,133
iTrader: (4)

Garage List
03/07 E90 335xi  [0.50]
Quote:
Originally Posted by cn555ic View Post
If you have option of folding mirrors with motor, All you would need to do is:

In NFRM module. Find. speigel_komfort_einklapp or Asp_komfort_einklapp. (you will find either one of the lines depending on year of car)
Set it to aktiv and mirrors should work with keyfob
Ah nah i dont have that option on my door, but i'll check for the Module anyway, but i doubt it. Thought this was kinda something like the Rear fogs, the button is there just need to activate or if you can code it you can have it fold with the keyfob.

Thanks bro.
__________________
JB4+usb | P3 Vent Boost Gauge v2 | BMS OCC | BMS DCI | AMS FMIC | AR xi CL DP's | BT Tool | Edibias/NCSExpert/INPA BMW Coding | Cyba Quad Exhaust tips | M-Tech Rear & M3 Front Bumper | Red Cyba Air Scoops | Blacklines | Vinyl Overlays | ACS Roof Spoiler | Matte Black Grilles | LED Side Mirrors | Rear Euro Fogs | etc..
.
BES335xi is offline   Albania
0
Reply With Quote
      07-06-2012, 04:46 PM   #16
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Here is my trace files for CTM before I made change to aktiv to
KOMFORT_OEFFNEN_FBD
KOMFORT_LADE_POSITION (this was already aktiv)
KOMFORT_SCHLIESS_FBD
SCHEIBEN_ANHEB_OEFF_FBD
SCHEIBEN_ANHEB_SCHL_FBD

Code:
BAUREIHE
	e93
ANZ_SCHEIBEN_AB
	wert_01
	wert_02
ANZ_SCHEIBEN_AB_KOMPL
	wert_01
	wert_02
GESCHWINDIGKEIT
	wert_02
HALLSENSOR_SEGMENTE
	wert_01
	wert_02
HS_VERS_KS_MASSE
	wert_01
	wert_02
HS_VERS_UNGUELTIG
	wert_01
	wert_02
HYSTERESE_KL30
	wert_01
	wert_02
KEIN_NETWORK
	nicht_aktiv
KEIN_POWER_DOWN
	nicht_aktiv
KEIN_SENDEN_STATUS
	nicht_aktiv
KEINE_ANFRAGE_SCHEIBEN
	nicht_aktiv
KL30_FEHLER
	aktiv
KOMFORT_OEFFNEN_FBD
	nicht_aktiv
KOMFORT_OEFFNEN_SCHLOSS
	aktiv
KOMFORT_SCHLIESS_FBD
	nicht_aktiv
KOMFORT_SCHLIESS_SCHLOSS
	aktiv
LED1_VERBAUT
	aktiv
LED2_VERBAUT
	aktiv
MAX_UEBERSPANNUNG
	wert_01
	wert_02
MIN_TEMPERATUR
	wert_01
MIN_UNTERSPANNUNG
	wert_01
	wert_02
NO_TIMEOUT_SETSTATUS
	not_aktiv
PUMPE1_RICHTUNG
	nicht_aktiv
RELAISTEST
	aktiv
ROT_AN_LED2
	nicht_aktiv
RP11_FEHLER
	aktiv
RP12_FEHLER
	aktiv
SCA1_FEHLER
	aktiv
SCA1_RICHTUNG
	nicht_aktiv
SCA1_VERBAUT
	aktiv
SCA2_VERBAUT
	aktiv
SCATEST
	nicht_aktiv
SCHWELLE_KL15
	wert_01
	wert_02
SPERR_GESCHWINDIGKEIT
	nicht_aktiv
SPERR_HECKKLAPPE
	nicht_aktiv
SPERR_KLR
	nicht_aktiv
SPERR_SCHEIBEN
	nicht_aktiv
SPERR_TEMPERATUR
	nicht_aktiv
SPERR_UEBERSPANNUNG
	nicht_aktiv
SPERR_UNTERSPANNUNG
	nicht_aktiv
STROM_SCA_BLOCK
	wert_01
	wert_02
STROM_SCA_NORMAL
	wert_01
	wert_02
STROM_SCA12_BLOCK
	wert_01
	wert_02
STROM_SCA12_NORMAL
	wert_01
	wert_02
STROM_VM_BLOCK
	wert_01
	wert_02
STROM_VM_NORMAL
	wert_01
	wert_02
TO_ZEIT_ANH_VDK
	wert_01
	wert_02
TO_ZEIT_WLM
	wert_01
	wert_02
V1_FEHLER
	aktiv
V1_VERBAUT
	aktiv
V2_FEHLER
	aktiv
V2_VERBAUT
	aktiv
V3_FEHLER
	aktiv
V3_VERBAUT
	aktiv
V4_FEHLER
	aktiv
V4_VERBAUT
	aktiv
VENTILTEST
	aktiv
VERR_RICHTUNG
	nicht_aktiv
VERRMOTOR_FEHLER
	aktiv
VERRMOTORTEST
	aktiv
VOEFF_FEHLER
	aktiv
VSCHL_FEHLER
	aktiv
VSW1_1_FEHLER
	aktiv
VSW1_1_LOGIK
	nicht_aktiv
VSW1_2_FEHLER
	aktiv
VSW1_2_LOGIK
	nicht_aktiv
VSW10_FEHLER
	nicht_aktiv
VSW10_LOGIK
	nicht_aktiv
VSW11_FEHLER
	nicht_aktiv
VSW11_LOGIK
	nicht_aktiv
VSW2_2_FEHLER
	nicht_aktiv
VSW2_2_LOGIK
	nicht_aktiv
VSW4_1_FEHLER
	aktiv
VSW4_1_LOGIK
	nicht_aktiv
VSW4_2_FEHLER
	aktiv
VSW4_2_LOGIK
	nicht_aktiv
VSW5_1_FEHLER
	aktiv
VSW5_1_LOGIK
	nicht_aktiv
VSW5_2_FEHLER
	aktiv
VSW5_2_LOGIK
	nicht_aktiv
VSW6_1_FEHLER
	aktiv
VSW6_1_LOGIK
	nicht_aktiv
VSW6_2_FEHLER
	aktiv
VSW6_2_LOGIK
	nicht_aktiv
VSW6_3_FEHLER
	aktiv
VSW6_3_LOGIK
	nicht_aktiv
VSW6_3_VERBAUT
	aktiv
VSW8_FEHLER
	aktiv
VSW8_LOGIK
	nicht_aktiv
VSW9_FEHLER
	aktiv
VSW9_LOGIK
	nicht_aktiv
ZEIT_PAUSE_PUMPE
	wert_01
	wert_02
ZEIT_PAUSE_SCA
	wert_01
	wert_02
ZEIT_PAUSE_VMOTOR
	wert_01
	wert_02
ZEIT_SCHEIBEN_AUF
	wert_01
	wert_02
ZEIT_SLEEP
	wert_01
	wert_02
ZEIT_TREIBER_RELAIS
	wert_01
	wert_02
KOMFORT_LADE_POSITION
	aktiv
KOMFORT_OEFFNEN_IDG
	aktiv
KOMFORT_SCHLIESS_IDG
	aktiv
KOMFORT_STOP_LADE_POS
	nicht_aktiv
PUMPE_ALARM
	wert_01
PUMPE_PREALARM
	wert_01
SCA_NUR_HKK
	nicht_aktiv
SCA_SCHUTZ_FAKTOR
	wert_01
	wert_02
SCHALTER_SEGMENTE
	wert_01
	wert_02
SCHEIBEN_ANHEB_OEFF_FBD
	nicht_aktiv
SCHEIBEN_ANHEB_OEFF_IDG
	aktiv
SCHEIBEN_ANHEB_SCHL_FBD
	nicht_aktiv
SCHEIBEN_ANHEB_SCHL_IDG
	aktiv
SCHEIBEN_KOMPL_OEFF_FBD
	aktiv
SCHEIBEN_KOMPL_OEFF_IDG
	aktiv
SCHEIBEN_KOMPL_SCHL_FBD
	aktiv
SCHEIBEN_KOMPL_SCHL_IDG
	nicht_aktiv
SPG_HALL_A_DAUER_FEHLER
	aktiv
SPG_HALL_A_SCHALT_FEHLER
	aktiv
SPG_HALL_C_DAUER_FEHLER
	aktiv
SPG_HALL_C_SCHALT_FEHLER
	aktiv
TEMP_FEHLER
	aktiv
TO_ZEIT_ABLEGEN
	wert_01
	wert_02
TO_ZEIT_AUSHEBEN
	wert_01
TO_ZEIT_ENTPACKEN
	wert_01
	wert_02
TO_ZEIT_PACKEN
	wert_01
	wert_02
TO_ZEIT_SCA
	wert_01
	wert_02
TO_ZEIT_SCHL_VDK
	wert_01
	wert_02
V5_FEHLER
	aktiv
V5_VERBAUT
	aktiv
VSW2_3_FEHLER
	aktiv
VSW2_3_LOGIK
	nicht_aktiv
VSW2_3_VERBAUT
	aktiv
VSW2_4_FEHLER
	aktiv
VSW2_4_LOGIK
	nicht_aktiv
VSW2_4_VERBAUT
	aktiv
ZEIT_NACHLAUF_VKLAPPE
	wert_01
ZEIT_RELAIS_TREIBER
	wert_01
	wert_02
ZEIT_SCA_SCHUTZ_RESTART
	wert_01
	wert_02
ZEIT_SCA_SCHUTZ_STOP
	wert_01
	wert_02
KEIN_AUS_SPG_HALL
	nicht_aktiv
SCHALEN_WEICH_AUFLEGEN
	aktiv
VSW2_2_VERBAUT
	nicht_aktiv
VSW5_3_FEHLER
	aktiv
VSW5_3_LOGIK
	nicht_aktiv
VSW5_3_VERBAUT
	aktiv
ENTPRELLUNG_TASTER_AKTIV
	wert_01
	wert_02
KEINE_FREIGABE_BEWEGUNG
	nicht_aktiv
KL30_LIMIT_DIAG_SW
	wert_01
	wert_02
MAX_NEIGUNG_BF
	wert_01
	wert_02
MAX_NEIGUNG_FA
	wert_01
	wert_02
OFFSET_DIAG_SW
	wert_01
	wert_02
RESTOEFFNEN
	aktiv
RESTSCHLIESSEN
	aktiv
SPERR_LADE_ZUSTAND
	nicht_aktiv
SPERR_NEIGUNG
	nicht_aktiv
TIMEOUT_FREIGABE
	wert_01
	wert_02
ZEIT_ABRISS_PUMPE
	wert_01
	wert_02
ZEIT_BEDIENUNG_FENSTER
	wert_01
RESTSCHLIESSEN_BEI_VSW2_3
	nicht_aktiv
SICHERN_HECKMODUL
	aktiv
TO_ZEIT_DAEMPFEN_HECKM
	wert_02
ZEIT_VERZOEGERUNG_WLV
	wert_01
	wert_02
TO_ZEIT_DAEMPFEN_SCHALEN
	wert_02
ABRISS_NTC_ATEMP1
	wert_01
ABRISS_NTC_ATEMP2
	wert_01
ZEIT_HALTEN_SCHALEN
	wert_01
OFFSET_NEIGUNG
	wert_01
	wert_02
SCHEIBEN_AB_KOMF_FBD
	aktiv
SCHEIBEN_AB_KOMF_IDG
	aktiv
SCHEIBEN_AB_KOMF_TUER
	nicht_aktiv
SCHEIBEN_ANHEB_OEFF_TAST
	aktiv
SCHEIBEN_ANHEB_OEFF_TUER
	aktiv
SCHEIBEN_ANHEB_SCHL_TAST
	aktiv
SCHEIBEN_ANHEB_SCHL_TUER
	aktiv
SCHEIBEN_KOMPL_OEFF_TAST
	nicht_aktiv
SCHEIBEN_KOMPL_OEFF_TUER
	nicht_aktiv
SCHEIBEN_KOMPL_SCHL_TAST
	nicht_aktiv
SCHEIBEN_KOMPL_SCHL_TUER
	nicht_aktiv
__________________

Coding E and F New York 917-939-4980

Last edited by cn555ic; 07-06-2012 at 05:03 PM.
cn555ic is offline   United_States
0
Reply With Quote
      07-06-2012, 04:49 PM   #17
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Here my Cas trace file before I made the change to FH_KOMFORTF_MIT_SUBST to aktiv

Code:
BAUREIHE
	e93
BAUART
	cabrio
MOTOR_ART
	benzin_normal
TYP_LENKUNG
	linkslenker
ZYLINDER_ZAHL
	6_zylinder
GETRIEBE_GAENGE
	6_gaenge
	8_gaenge
KLASSE_BATTERIE
	90ah_agm
STROM_RUHE
	wert_01
STROM_KS_MIN
	wert_01
STROM_KS_MAX
	wert_01
STARTABBRUCH_BREMSE
	aktiv
KOMFORTSTART
	aktiv
KOMFORT_EIN
	aktiv
ERROR_EJECT
	nicht_aktiv
ZEIT_BREMSE
	wert_02
BREMSE_DRUCK
	wert_01
KOMFORT_AUS_IN_50MS
	wert_03
KLR_AUS_TIMEOUT
	wert_03
KL30G_TIMEOUT
	wert_02
SICHERHEITSFAHRZEUG
	nicht_aktiv
HECKSCHEI_ENTR_OHNE_NR
	nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_1
	nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_2
	nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_3
	nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_4
	nicht_aktiv
TOEHK_EO_HS_OHNE_NR
	nicht_aktiv
TOEHK_EO_HS_SCHL_NR01
	nicht_aktiv
TOEHK_EO_HS_SCHL_NR02
	nicht_aktiv
TOEHK_EO_HS_SCHL_NR03
	nicht_aktiv
TOEHK_EO_HS_SCHL_NR04
	nicht_aktiv
HKAT_EO_HS_OHNE_NR
	nicht_aktiv
HKAT_EO_HS_SCHL_NR01
	nicht_aktiv
HKAT_EO_HS_SCHL_NR02
	nicht_aktiv
HKAT_EO_HS_SCHL_NR03
	nicht_aktiv
HKAT_EO_HS_SCHL_NR04
	nicht_aktiv
FH_KINDERSICHERUNG
	aktiv
ZV_DISFERTMODE
	nicht_aktiv
ZV_DISTRANSMODE
	aktiv
ZV_DISWERKSTMODE
	nicht_aktiv
CLT_TASTE
	aktiv
SPERRE_CRASH_ER
	aktiv
VR_KLR
	nicht_aktiv
VR_KLR_EINMALIG
	nicht_aktiv
VR_GESCHW_EINMALIG
	aktiv
SPERRE_HECKKLAPPE_KLR
	nicht_aktiv
ER_TANKKLAPPE_SER
	aktiv
ER_TANKKLAPPE_VR
	aktiv
ER_KEYOUT_AUTOVR
	nicht_aktiv
ENABLE_CLT_NACH_CRASH
	nicht_aktiv
ZV_AUTHENTISIERUNG
	nicht_aktiv
CCM_SEND_INVALID
	nicht_aktiv
CRASH_SCHWERE
	wert_02
CRASH_BESCHLEUNIGUNG
	wert_01
VERRIEGELUNGSSCHWELLE
	wert_04
GESCHW_SPERRE_TOEHK
	wert_01
ZEIT_AUTO_ZV_VR
	wert_01
VER_AUT_X_MIN_OHNE_NR
	nicht_aktiv
VER_AUT_X_MIN_SENDER_1
	nicht_aktiv
VER_AUT_X_MIN_SENDER_2
	nicht_aktiv
VER_AUT_X_MIN_SENDER_3
	nicht_aktiv
VER_AUT_X_MIN_SENDER_4
	nicht_aktiv
VERRIEGEL_XKM/H_OHNE_NR
	nicht_aktiv
VERRIEGELN_XKM/H_SENDER_1
	aktiv
VERRIEGELN_XKM/H_SENDER_2
	aktiv
VERRIEGELN_XKM/H_SENDER_3
	nicht_aktiv
VERRIEGELN_XKM/H_SENDER_4
	nicht_aktiv
FH_UMLSCH
	nicht_aktiv
FH_ECEFIN
	nicht_aktiv
FH_ABSCHALTKRITERIUM
	aktiv
FH_USACANADA
	nicht_aktiv
FH_DISAKL15
	nicht_aktiv
FH_DISAKLR
	nicht_aktiv
KOMFORTOEFFNUNG_FB
	aktiv
KOMFORTOEFFNUNG
	aktiv
KOMFORTSCHLIESSUNG
	aktiv
FH_RESETTIMEOUTKL50
	aktiv
FH_TUERBED_EINSTG
	aktiv
FH_SCHLIESSEN_EINSTG
	aktiv
FH_DISTGDEFECT
	aktiv
FH_KMFRTFBDTIM
	aktiv
FH_DISCLSYDEFECT
	aktiv
FH_DISFBDDEFCT
	aktiv
FH_DISFERTMODE
	aktiv
FH_DISTRANSMODE
	aktiv
FH_DISWERKSTMODE
	aktiv
KMFRT_OEFF_HINTEN
	wert_01
KMFRT_OEFF_SHD
	wert_01
KMFRT_SCHL_VORNE
	wert_01
KOMFORT_SCHL_SHD
	wert_01
ANSTEUERZEIT
	wert_01
KMFRT_OEFFNEN
	wert_01
KMFRT_SCHLIESSEN
	wert_01
MIND_KMFRT_NACH_UNTERB
	wert_01
MAX_KMFRT_UNTERB
	wert_01
MAX_KMFRT_UNTERB_FBD
	wert_01
SLEEPTIMER_FH_KLRAUS
	wert_01
PERSONALISIERUNG_AUS
	nicht_aktiv
SONDERTASTE_INNENLICHT
	nicht_aktiv
FBD_AKTIV_KL15AUS
	nicht_aktiv
FBD_AKTIV_KEYIN
	aktiv
FBD_TESTKEY_AKTIV
	nicht_aktiv
FBD_HECKKLAPPE_TOTZEIT
	wert_02
FBD_PANIK_TOTZEIT
	wert_01
FBD_MOTORLAUF
	wert_01
FBD_MOTORSTART
	wert_01
FBD_PANIKDAUER
	wert_01
FBDIN_9_6_KBAUD
	aktiv
MFS_KEY_PLGD
	nicht_aktiv
FBD_DISFERTMODE
	nicht_aktiv
FBD_DISTRANSMODE
	nicht_aktiv
FBD_DISWERKSTMODE
	nicht_aktiv
PA_CONFIG_FBDREFCHECK
	nicht_aktiv
PA_TVRERFATH
	wert_01
PA_TSPERRVR
	wert_01
PA_TBEREITPE
	wert_01
PA_ID_GEBER
	wert_01
PA_FBD_REF
	wert_01
PA_TBEREIT_PG
	wert_01
CHIPCARD
	aktiv
BOS_DATEN_ANFRAGEN
	aktiv
FS_DATEN_ANFRAGEN
	aktiv
SQCNT_UPDATE
	nicht_aktiv
BEDINGUNG_CC_10KM
	aktiv
EE_ZEIT_NLF
	wert_01
EE_ZEIT_ABFR
	wert_01
GESCHW_REQ_CC
	wert_01
EWS_NACHLAUF_KLR_AUS
	nicht_aktiv
EWS_FEHLER_MOTORLAUF
	aktiv
EWS_SCHRITTWEITE_2
	nicht_aktiv
MOTOR_HUBRAUM
	n54b30_neu
	n55b30
LAENDERVARIANTE_BNDB
	us
GETRIEBE_TYP
	schrittschaltung
ANLASSSPERRE_BLS
	aktiv
ES_EINMALIG_CLT
	aktiv
SCHAERFEN/ENTSCHAERFEN
	schloss_und_fernbedienung
CAN_MEHRFACH_SICHERN
	aktiv
MOTORHAUBENKONTAKT
	aktiv
ZV_SELEKTIV
	aktiv
SEL_ZV_SENDER_1
	nicht_aktiv
SEL_ZV_SENDER_2
	aktiv
SEL_ZV_SENDER_3
	aktiv
SEL_ZV_SENDER_4
	aktiv
FH_SICHERHEITSFAHRZEUG
	nicht_aktiv
FH_CABRIO_VERDECK_MODUL
	aktiv
FH_HINTEN
	aktiv
SCHIEBEHEBEDACH
	nicht_aktiv
FH_DISASHD_KL15
	nicht_aktiv
KOMFORTSCHLIESSUNG_FB
	aktiv
KOMFORTSCHLIESSUNG_PA
	nicht_aktiv
EINSTIEGSHILFE_OHNE_NR
	nicht_aktiv
EINSTIEGSHILFE_SENDER_1
	nicht_aktiv
EINSTIEGSHILFE_SENDER_2
	nicht_aktiv
EINSTIEGSHILFE_SENDER_3
	nicht_aktiv
EINSTIEGSHILFE_SENDER_4
	nicht_aktiv
SONDERTASTE_PANIKALARM
	panikalarm
MOTORFERNSTART_GENERELL
	nicht_aktiv
MOTORFERNSTART_CAN
	nicht_aktiv
FBD_HSF_0
	wert_09
FBD_HSF_1
	wert_09
PASSIVE_ACCESS
	nicht_aktiv
AUSWERTUNG_B_DRUCK
	nicht_aktiv
AUSWERTUNG_P_CAN
	aktiv
KLSTRG_DISFERTMODE
	nicht_aktiv
KLSTRG_DISTRANSMODE
	nicht_aktiv
KLSTRG_DISWERKSTMODE
	nicht_aktiv
MFS_MIT_TON
	nicht_aktiv
STARTDELAY_K_START
	nicht_aktiv
EE_TRSP_CCM_0CD
	nicht_aktiv
EE_TRSP_PERM
	aktiv
FBD_SERVICEFKT_AKTIV
	aktiv
DELAY_KL50L
	wert_01
HK_ENABLE_OPEN
	aktiv
ANLASSERSPERRE_KPS
	nicht_aktiv
EE_TRSP_DEBUG
	nicht_aktiv
KLSTRG_TESTER
	nicht_aktiv
KOMFORT_EJECT
	aktiv
PA_CHIPCARD_ACTIVE
	aktiv
PA_DISABLE_HK_REV
	nicht_aktiv
PA_HK_BACK_IR_SEARCH
	aktiv
PA_HK_INTERIOR_SEARCH
	nicht_aktiv
PA_HK_PGS_SEARCH
	nicht_aktiv
PA_HK_REOPEN_CTL_DEP
	aktiv
PA_HK_REOPEN_CTR_LOCK
	nicht_aktiv
PA_HK_RSCR_ACTIVE
	nicht_aktiv
PA_SILENTTIMEOUT
	wert_01
ANLASSERSPERRE_P
	aktiv
AUSWERTUNG_P_HW
	aktiv
CLASS_PWR
	keine
DELAY_KLR_AUS
	wert_02
STARTABBRUCH_P
	aktiv
KLR_EIN_GESCHW
	aktiv
ANLASSERSCHUTZ_3SEK
	aktiv
SPERRE_KLRAUS_SST
	nicht_aktiv
EINSTIEGSHILFE_DEFAULT
	nicht_aktiv
EINSTIEGSHILFE_PORT
	nicht_aktiv
PA_HK_REOPEN_INDICATE
	aktiv
PA_HK_REV_ZYKL
	aktiv
PA_MONITOR_ACTIVE
	nicht_aktiv
RSSI_THRESHOLD
	wert_05
SEL_ZV_SENDER_DEFAULT
	aktiv
SEL_ZV_SENDER_PORT
	aktiv
STARTWUNSCH_KL50
	aktiv
VER_AUT_X_MIN_DEFAULT
	nicht_aktiv
VER_AUT_X_MIN_PORT
	nicht_aktiv
VERRIEGELN_XKM/H_DEFAULT
	nicht_aktiv
VERRIEGELN_XKM/H_PORT
	nicht_aktiv
TEST_DUTY_CYCLE
	aktiv
FBD_HKL_NUR_ER
	nicht_aktiv
PA_HA_SEARCH_ACTIVE
	nicht_aktiv
KL15HW01_ALLWAYS
	aktiv
PA_TRUNK_HIGH
	aktiv
SENDMHKCCMLIMIT
	wert_02
HS_ENABLE_OPEN
	nicht_aktiv
HKL_LIFT_BEI_CA
	nicht_aktiv
FHM_CA_OHNE_EKS
	nicht_aktiv
FHM_CA_OHNE_EKS_DELAY
	wert_01
HK_GESPERRT_IN_GESICHERT
	nicht_aktiv
AUT_OFFNEN_HK_IN_ENTLPOS
	aktiv
EWS_EGS
	nicht_aktiv
CBS_VERSION
	wert_03
KL30G_NACHLAUF_NACH_SZ1
	wert_00
	wert_08
SCHLUESSELVARIANTE
	wert_03
FH_KOMFORTF_MIT_SUBST
	nicht_aktiv
ZEIT_KL50_ANSTRG
	wert_03
ABZUGSPERRE_PLOCK_C6
	aktiv
FBD_LOAD_POS_HK_HK
	aktiv
FBD_LOAD_POS_LF_PING
	nicht_aktiv
FH_RELEASE_CA_BASIC
	nicht_aktiv
KL30G_EIN_HKT_AUSSEN_07
	aktiv
KL30G_EIN_HKT_FBD_07
	aktiv
KLR_AUS_TK
	aktiv
KLSTRG_GRB_ID
	wert_01
SPERRE_HKL_KEY_VALID_07
	aktiv
SS_GETRIEBE_7
	nicht_aktiv
STARTABBRUCH_KLR
	nicht_aktiv
STARTDELAY_K_START_R5X
	nicht_aktiv
TC_KL15_AUTO_OFF
	nicht_aktiv
TC_KL15_AUTO_OFF_LIGHT
	nicht_aktiv
TC_MSA_NO_KL15_AUTO_OFF
	nicht_aktiv
TC_TIME_KL15_AUTO_OFF
	wert_00
FBD_COMFORT_OPEN_LF_PING
	nicht_aktiv
PA_TBEREIT_HK
	wert_01
CCM_0X42_IM_NACHLAUF
	nicht_aktiv
NLF_AUS_ALLE_TUEREN
	nicht_aktiv
NEUES_FSE_KONZEPT
	nicht_aktiv
PA_SUPERRANGE_R56
	nicht_aktiv
PA_TAGE_REAR_RL_MIRROW
	nicht_aktiv
ELV_AUT_FCT
	nicht_aktiv
ELV_RESET_FCT
	nicht_aktiv
FBD_NO_LOAD_POS_C08
	aktiv
This is all that I changed to get it working plus making Speigel_komfort_einklapp from the NFRM module to aktiv
Hopefully some people can take advantage of it. Good luck as I hope some of the lucky guys get it working because its so sweet to have the top open and close with the fob and not having comfort access!
__________________

Coding E and F New York 917-939-4980

Last edited by cn555ic; 07-07-2012 at 08:02 PM.
cn555ic is offline   United_States
0
Reply With Quote
      07-08-2012, 06:30 PM   #18
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
So far two guys tried it and it doesn't work for them. I am currently working with one person to match the trc file for my CTM module to his. Script for script.


Looks like I am the only one in the entire world at the moment that has the key fob functioning to remotely open/close the windows/mirrors and the convertible hardtop on a E93 without COMFORT ACCESS!!
__________________

Coding E and F New York 917-939-4980
cn555ic is offline   United_States
0
Reply With Quote
      07-08-2012, 08:13 PM   #19
DESI4life10
Banned
 
DESI4life10's Avatar
 
Drives: Coding: Desi4life10@gmail.com
Join Date: Oct 2008
Location: West of Toronto, Canada

Posts: 3,365
iTrader: (18)

I am going to be able to code the convertible next weekend. He couldnt make it out this weekend.

Fingers crossed**
DESI4life10 is offline   Canada
0
Reply With Quote
      07-08-2012, 08:39 PM   #20
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Quote:
Originally Posted by DESI4life10 View Post
I am going to be able to code the convertible next weekend. He couldnt make it out this weekend.

Fingers crossed**
Make sure you make a copy of my CTM trace file and print it out...If the changes that I listed above doesnt work, try print out both mine and your friend's CTM trace file and compare the two and make necessary changes to match exactly mine, hopefully it will work. I am currently working with another person in doing this. He got his top to go down with windows and mirrors unfolded, but when he pressed close on the key fob only the mirrors folded in and the windows closed and the top did nothing!!!. So he will make the changes that we found about 6 lines that were set differently and he will make the changes tomorrow as he lives in a different time zone then us. Also his 2010 CTM module has 5 more script lines then mine but they dont seem to be komfort closing related. I dont know if its going to work but we will see, hopefully your friends CTM module has the same identical script lines as mine does and make it exactly line for line the same as mine and hopefully he is the second on the planet that has it working without Comfort access!! lol. Keep me posted

the 6 lines that were different from his to mine was

Scheiben_kompl_schl_idg
Scheiben_ab_komf_tuer
Scheiben_kompl_oeff_tast
Scheiben_kompl_oeff_tuer
Scheiben_kompl_schl_tast
Scheiben_kompl_schl_tuer

His was all set to aktiv while mine were all nicht-aktiv
__________________

Coding E and F New York 917-939-4980

Last edited by cn555ic; 07-08-2012 at 09:03 PM.
cn555ic is offline   United_States
0
Reply With Quote
      07-10-2012, 02:20 PM   #21
cn555ic
BimmerPost Supporting Vendor

 
cn555ic's Avatar
 
Drives: 917-939-4980
Join Date: Jun 2007
Location: New York

Posts: 18,254
iTrader: (5)

Send a message via Yahoo to cn555ic
Everyone that has a convertIble has comfort access??? No one can report any success on this? Everyday I see verts riding all over the place. I guess no one is on these forums
__________________

Coding E and F New York 917-939-4980
cn555ic is offline   United_States
0
Reply With Quote
      07-13-2012, 05:52 PM   #22
MikeinAlexandria
Lieutenant
 
Drives: 128i M Sport Convertible
Join Date: Aug 2010
Location: Alexandria, VA

Posts: 567
iTrader: (0)

Here is an excerpt from my post on a different forum. It relates to the roof, windows and mirrors and hopefully will clear up some questions.

In the CVM module...
Code:
KOMFORT_BEDIENUNG_E88_C05
wert_01 Roof does not open with Key Fob
wert_02 Windows lower partially and roof opens with Key Fob
The translation is Comfort Operation E88 C05

So, it works!!! Like magic, my roof did its thing.

Yet another update: Today I have comfort windows up and mirrors folded with the key fob!! Thankyou to neo_anderson for finding this!

Change:

Code:
FH_KOMFORTF_MIT_SUBST
 nicht_aktiv->aktiv
One press on lock now locks the doors. Press and hold folds the mirrors and rolls up the windows.

Next update:
My problem with the key fob roof open was that windows would go down partially and the roof folds up. Not bad but not exactly what I wanted (I want the windows to roll down all the way... and yes, thanks to NCSDUMMY, I found the code for that in CVM)

Code:
SCHEIBEN_FUNK_E88_C05   - Function of windows during remote roof operation       
    wert_01                     value 01  - windows roll down slightly to allow roof to retract
    wert_02                     value 02  - windows roll down fully and then roof retracts

SCHEIBEN_TASTER_E88_C05 - Function of windows during roof operation with console buttons     
    wert_01                     value 01 - roof closes windows remain lowered
    wert_02                     value 02 - roof closes.  Continue to hold down the console button and the windows roll up
With current software in the convertibles, I still have not found a way to raise the top without comfort access. I suspect there is a secret entry in the CVM/CTM modules that controls this. So if you want the top to open and close, don't update modules in the car. My car was already at sp daten 45, having been in built late summer of 2010. So no amount of tweaking has changed that. The one person I know with an E93 had this working till he went to the dealership for some work. They updated his car and all coding was lost. When he recoded everything, his top no longer closes by the remote, just the dash board button or using the key in the door.
MikeinAlexandria is offline   United_States
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 12:30 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST