[bmvee]

Okay, so I'm new at this coding. I was able to code no seatbelt warning and digital speedometer. but now, my fuel, oil temp, and tachometer doesn't work. I'm not sure what I did wrong. How can I reset everything back to normal? like remove all coding?

[JustinGTP]

When you first read your car, you should have saved that file as your original backup. I'm guessing you didn't do that?

[bmvee]

Originally Posted by JustinGTP

When you first read your car, you should have saved that file as your original backup. I'm guessing you didn't do that?

I made a copy of it but it turned out to be the one that was already in there. I didn't know so its useless. Damn it.

[JustinGTP]

So you edited the original and coded with that? That is the original that your car had. Can you remember what you changed?

Did you use this excel sheet? https://docs.google.com/spreadsheet/...CPqY7sEC#gid=0

Some options dont work for some years, maybe you edited the wrong one.

[Yngvejos]

Reset the module by loading the experten mode profile.
Just like in normal coding you choose the e89 chassis and read VIN from cas. Press "back", then "Process ECU".
Choose frm/nfrm and click "Execute job".
This will code the standard values from the vehicle order.

[ctuna]

The one that occurs when you don't have up to date daten files.

from this sticky

http://www.e90post.com/forums/showthread.php?t=586614

[bmvee]

Originally Posted by JustinGTP

So you edited the original and coded with that? That is the original that your car had. Can you remember what you changed?

Did you use this excel sheet? https://docs.google.com/spreadsheet/...CPqY7sEC#gid=0

Some options dont work for some years, maybe you edited the wrong one.

I just coded two things: SBR_FAHRER_1 in ABG module and BC_DIGITAL_V in KOMBI module. I didn't change anything else. I used the diy pdf and files on the sticky to code. I also reverted the coding, but still no work.

[DESI4life10]

Your daten files are older than what is on your car. It has been discussed many times before. A sticky thread was even created for this exact issue.

Download latest daten files and then code module to default.

[cn555ic]

Update to newer Spdaten files like other stated and then code with expertmode and write module back to default

[bmvee]

Yes, I'm actually looking at a few threads with similar problem. When you guys say use expertmode and recode. Do you mean loading expertmode, press f1, f3, choose cas, press back, process ecu, choose each module, and execute job?

[cn555ic]

Choose cas then choose Kombi then read the kOmbi module and then go straight to job and choose Sg_coderien and execute job


Coding is not a game. You should really do a thorough research and read into it more and gain an understanding of what is needed to code a car. You can easily Mess things up quickly. If u would have researched and read then you should already know updating the the most recent spdaten files is a must.

[bmvee]

Originally Posted by cn555ic

Choose cas then choose Kombi then read the kOmbi module and then go straight to job and choose Sg_coderien and execute job


Coding is not a game. You should really do a thorough research and read into it more and gain an understanding of what is needed to code a car. You can easily Mess things up quickly. If u would have researched and read then you should already know updating the the most recent spdaten files is a must.

I just used v46, expertmode and what you told me. It didn't work. I will try again. Maybe I need to use older daten files?

[E90PAT]

Originally Posted by DESI4life10

Your daten files are older than what is on your car. It has been discussed many times before. A sticky thread was even created for this exact issue.

Download latest daten files and then code module to default.

Originally Posted by cn555ic

Update to newer Spdaten files like other stated and then code with expertmode and write module back to default

+1

Originally Posted by bmvee

Yes, I'm actually looking at a few threads with similar problem. When you guys say use expertmode and recode. Do you mean loading expertmode, press f1, f3, choose cas, press back, process ecu, choose each module, and execute job?

In this case just KOMBI since the only module responsible for your tach is such

Originally Posted by bmvee

I just used v46, expertmode and what you told me. It didn't work. I will try again. Maybe I need to use older daten files?

Make sure you properly updated respective folders.

This seems to be condensed down to 2006 production year cars with recently updated KOMBI at the dealer using old files.

[E90PAT]

backing up your trc file does nothing for you. Your settings are already determined by your vin and VO string, which means all you have to do is expertmode >> execute job. In this case, its a difference in functions your car isnt familiar with from what you flash it with, so it freaks out and stalls. TRC files only contains converted hex values into simple active, not active, pre designated values per function ei reversible

[ctuna]

By the way what is the build month and year of your car.
If you state that then maybe others car tell you which version of the
daten files will work with your car.

[Elliott@DetailAddict]

Originally Posted by ctuna

The one that occurs when you don't have up to date daten files.

from this sticky

http://www.e90post.com/forums/showthread.php?t=586614

Originally Posted by DESI4life10

Your daten files are older than what is on your car. It has been discussed many times before. A sticky thread was even created for this exact issue.

Download latest daten files and then code module to default.

Originally Posted by cn555ic

Update to newer Spdaten files like other stated and then code with expertmode and write module back to default

Thank you guys!
I had it made a sticky for a reason lol
If you're new on here all you need to do is read or

[bmvee]

Originally Posted by ctuna

By the way what is the build month and year of your car.
If you state that then maybe others car tell you which version of the
daten files will work with your car.

My car production is 09/2006 for 2007 model year. last 7 digits are PA65062.

[bmvee]

I LOVE YOU GUYS! sorry for being a nub. I panicked and didn't know what to do. After reading like 20 threads, I got it down. I'm scared now and don't want to mess with coding anymore

All for a no seatbelt warning. sigh.

[cn555ic]

Coding is not for everyone! Anyhow glad u got it working again.