Interior trim wrapping for $150 - Page 2 - BMW 3-Series (E90 E92) Forum

Alex@Helix · 08-26-2012, 10:04 PM

I suggest not using Hexis, its a terrible terrible vinyl

medvec04 · 08-26-2012, 11:04 PM

Quote:

Originally Posted by Alex@Helix

I suggest not using Hexis, its a terrible terrible vinyl

i mainly use 3m, but i hexis came out with new material that i sampled. why do u say that its not good?

medvec04 · 08-26-2012, 11:05 PM

Quote:

Originally Posted by Cbozz

it looks like the CF pattern on the dash should be the other way!

its all going the same way if you look closely.

Zuluaga · 08-27-2012, 07:42 AM

anyone else in the Miami Area that can do it for $150? come on guys- I need the wood look gone!

monkey_wrench · 08-27-2012, 10:42 AM

Quote:

Originally Posted by Zuluaga

anyone else in the Miami Area that can do it for $150? come on guys- I need the wood look gone!

Same here, but Sarasota area!

07siv · 08-28-2012, 10:32 AM

same here but Orlando area!

ragenitro6 · 08-28-2012, 11:54 AM

I can do the interior wraps as well - I live in Jax

If enough people down in South FL show interest, I can perhaps arrange a road trip but it would have to be confirmed appts, etc so it's not a wasted trip

medvec04 · 08-28-2012, 07:53 PM

Quote:

Originally Posted by ragenitro6

I can do the interior wraps as well - I live in Jax

If enough people down in South FL show interest, I can perhaps arrange a road trip but it would have to be confirmed appts, etc so it's not a wasted trip

Where in jax do live?

medvec04 · 08-28-2012, 07:54 PM

Do u have any pics of the cars u have done? What material do u use as well

ragenitro6 · 08-28-2012, 08:12 PM

Quote:

Originally Posted by medvec04

Do u have any pics of the cars u have done? What material do u use as well

Live not far from UNF
I'll get some pics up
I use 3M 1080

monkey_wrench · 08-28-2012, 09:25 PM

Quote:

Originally Posted by ragenitro6

I can do the interior wraps as well - I live in Jax

If enough people down in South FL show interest, I can perhaps arrange a road trip but it would have to be confirmed appts, etc so it's not a wasted trip

I'm in. There's probably some guys in Ft.Myers as well.

medvec04 · 08-28-2012, 10:08 PM

Quote:

Originally Posted by ragenitro6

Quote:

Originally Posted by medvec04

Do u have any pics of the cars u have done? What material do u use as well

Live not far from UNF
I'll get some pics up
I use 3M 1080

How much do u charge?

E90PAT · 08-28-2012, 10:43 PM

Can you please post more pictures of the grey interior? More far and some close.

ragenitro6 · 08-29-2012, 08:32 AM

Quote:

Originally Posted by medvec04

How much do u charge?

Right about in-line with what you're doing...

medvec04 · 08-29-2012, 11:17 AM

Quote:

Originally Posted by E90PAT

Can you please post more pictures of the grey interior? More far and some close.

Yea sure I'll post some more when I get off of work tonight.

JohnSprm69 · 08-29-2012, 02:17 PM

Quote:

Originally Posted by Zuluaga

anyone else in the Miami Area that can do it for $150? come on guys- I need the wood look gone!

i'll do it for $150. you got a coupe or sedan?

EHDEN · 08-29-2012, 07:42 PM

that CF looks pretty good. reminds me of the e46 zhp 330 interior

Alex@Helix · 08-31-2012, 07:26 PM

Quote:

Originally Posted by medvec04

i mainly use 3m, but i hexis came out with new material that i sampled. why do u say that its not good?

It doesn't have enough tack to it at all. The stuff is garbage in my opinion. Ive only used it once and swore off of it, maybe the stuff I used was old and they came out with new stuff. Either way Ill never take a chance and buy Hexis vinyl again

I think 150$ is too cheap. If you offer someone 200$-220, they may go for it and actually do a good job. That fabric cf is difficult to work with and di-noc is expensive. Either way, it takes a long time or material costs a lot.
Alex

medvec04 · 09-01-2012, 09:17 AM

Quote:

Originally Posted by Alex@Helix

Quote:

Originally Posted by medvec04

i mainly use 3m, but i hexis came out with new material that i sampled. why do u say that its not good?

It doesn't have enough tack to it at all. The stuff is garbage in my opinion. Ive only used it once and swore off of it, maybe the stuff I used was old and they came out with new stuff. Either way Ill never take a chance and buy Hexis vinyl again

I think 150$ is too cheap. If you offer someone 200$-220, they may go for it and actually do a good job. That fabric cf is difficult to work with and di-noc is expensive. Either way, it takes a long time or material costs a lot.
Alex

I'm sorry that u had a bad experience with it. But the material I have used had been fine I've never had a problem with it and they offer a great warranty with it as well. For as far as the price I was saying 150 cause I'm getting the vinyl at cost so I'm able to do it for cheaper. It only takes me about 1.5 to 2 hrs. Im trying to get people to do it.

JohnSprm69 · 09-01-2012, 09:44 AM

Quote:

Originally Posted by medvec04

I'm sorry that u had a bad experience with it. But the material I have used had been fine I've never had a problem with it and they offer a great warranty with it as well. For as far as the price I was saying 150 cause I'm getting the vinyl at cost so I'm able to do it for cheaper. It only takes me about 1.5 to 2 hrs. Im trying to get people to do it.

very good medvec :thump:

medvec04 · 09-10-2012, 11:14 PM

Bump

Mce1267 · 10-10-2012, 05:18 PM

Anyone know of a "wrapper" in the West Palm Beach or better yet Jupiter area ? All my paint is coming off the plastic parts and needs to be fixed.

08-26-2012, 10:04 PM	#23
Alex@Helix BimmerPost Supporting Vendor Drives: e92 335i Join Date: Sep 2007 Location: Miami, FL Posts: 2,211 iTrader: (8)	I suggest not using Hexis, its a terrible terrible vinyl __________________

08-28-2012, 10:32 AM	#28
07siv Private Drives: 335i Join Date: Mar 2012 Location: Melbourne FL Posts: 73 iTrader: (1) Garage List 07 BMW 335i [0.00]	same here but Orlando area! __________________ 07 335i-Prem pkg-Spts pkg-6 Spd-Coral red leather-Carbon Fiber trim-M3 steering wheel-M3 knob-Alcantara boots w red stitching-Logic 7-Lux h8 V3 LED angel eyes-Mtec 6k HID-GP Thunder 75k Fogs-6k LED License light-Blk lower grill-Blk kidney grill-blk window trim-4" exhaust tips-JB4-BMS DCI-Aero front Lip-M3 Side Skirts-Performance spoiler-LCI Tails-Roof spoiler-Painted side reflectors-20% tint-Blk Calipers-19" Alufelgen SF-71

08-28-2012, 10:43 PM	#35
E90PAT SOFLO CODING Drives: E90 335i Join Date: Apr 2009 Location: SoFla Posts: 3,033 iTrader: (17)	Can you please post more pictures of the grey interior? More far and some close. __________________ Coding services in Broward/Miami/Gainesville and surrounding areas! Ask me!

08-29-2012, 07:42 PM	#39
EHDEN Brigadier General Drives: 2011 335iS Join Date: Oct 2006 Location: FloridaBimmer.com Posts: 3,461 iTrader: (0) Garage List 2011 335is Coupe [5.00] 2007 e92 335i [0.00] 2004 C-Class [0.00]	that CF looks pretty good. reminds me of the e46 zhp 330 interior __________________ www.FloridaBimmer.com - Powered by our members! Follow us: Twitter . InstaGram . Join our E-Mail List

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

08-27-2012, 07:42 AM	#26
Zuluaga Private First Class Drives: 2009 E93 6 speed Join Date: Dec 2011 Location: Miami Posts: 110 iTrader: (0)	anyone else in the Miami Area that can do it for $150? come on guys- I need the wood look gone!

08-28-2012, 11:54 AM	#29
ragenitro6 Private First Class Drives: 2007 328i pre LCI Join Date: Jul 2012 Location: Florida Posts: 140 iTrader: (0)	I can do the interior wraps as well - I live in Jax If enough people down in South FL show interest, I can perhaps arrange a road trip but it would have to be confirmed appts, etc so it's not a wasted trip

08-28-2012, 07:54 PM	#31
medvec04 Second Lieutenant Drives: 07 silver 335i sedan Join Date: May 2011 Location: jacksonville, florida Posts: 270 iTrader: (4)	Do u have any pics of the cars u have done? What material do u use as well

09-10-2012, 11:14 PM	#43
medvec04 Second Lieutenant Drives: 07 silver 335i sedan Join Date: May 2011 Location: jacksonville, florida Posts: 270 iTrader: (4)	Bump

10-10-2012, 05:18 PM	#44
Mce1267 New Member Drives: 2009 335i convertible Join Date: Oct 2012 Location: Jupiter florida Posts: 9 iTrader: (0)	Anyone know of a "wrapper" in the West Palm Beach or better yet Jupiter area ? All my paint is coming off the plastic parts and needs to be fixed.