aFe Intake Fix/Solution | Surging & Power Loss Issues Resolved - Page 3 - BMW 3-Series (E90 E92) Forum

ZeroSix · 09-08-2012, 11:20 PM

$60 is a little pricey for a block of aluminum...is it not?

Tim603 · 09-09-2012, 10:53 AM

Quote:

Originally Posted by ohsix

$60 is a little pricey for a block of aluminum...is it not?

Had to get it custom made so I dont think its that bad. If i get a bunch made i could probably get a lower price

Tim603 · 09-10-2012, 10:21 AM

Quote:

Originally Posted by soursamo

I'll be the first to say put me down for one if you decide to get them machined!

Quote:

Originally Posted by berserkerx

I am one of the guys who just stuck with a stock air box and a K&N. If this is a real fix I may make the jump. But I am guessing this intake still suffers from heat soak?

Quote:

Originally Posted by 325xi-06

i will have to try this fix also. as my car runs un-smooth :P

Quote:

Originally Posted by RupertPupkin

I bought it for sound. I didn't expect gains and don't think there were any. I didn't say it did. I said it sounds great and have no issues especially the power loss everyone talks about. I said it MAY have gained some but even if it did I wouldn't be able to feel it. I've modded many cars before and know what to expect.

Troll

Quote:

Originally Posted by DFW_E90_325i

I have the same issue. I'm want to figure out how to make one. Probably wont be pretty but I'll make it work. 4000-6000 rpm is almost a complete waste. At least the sound is there lol.

Quote:

Originally Posted by ohsix

You sir, are a genius.

Thank you. Is it possible that you can manufacture a few of them and sell them?

Let me know if any of you would like some made. I will include the longer bolts for installation. $60 shipped

e9012345 · 09-10-2012, 03:35 PM

Quote:

Originally Posted by Tim603

Let me know if any of you would like some made. I will include the longer bolts for installation. $60 shipped

Can you provide us with the exact measurements and sizing etc that can be given to a machine shop in my area?

Cheers

Tim603 · 09-10-2012, 03:59 PM

Quote:

Originally Posted by e9012345

Can you provide us with the exact measurements and sizing etc that can be given to a machine shop in my area?

Cheers

Im going down the the machine shop on thursday to get the measurements, I will let you know as soon as I get my hands on them.

rich123321 · 09-10-2012, 07:10 PM

How does it feel after the spacer was put in ? I'd like one but 60 is kind of expensive

e9012345 · 09-10-2012, 08:07 PM

Quote:

Originally Posted by Tim603

Im going down the the machine shop on thursday to get the measurements, I will let you know as soon as I get my hands on them.

Thanks for being the hero that E90post needs... not the hero E90post deserves.

Tim603 · 09-11-2012, 10:03 AM

Quote:

Originally Posted by rich123321

How does it feel after the spacer was put in ? I'd like one but 60 is kind of expensive

In all honesty I have been driving with the Afe intake for about 6 months now and pretty much got used to how the car was driving, after I put in the spacer all I can say is wow, this is how the N52 engine is supposed to drive. For the longest time I though the N52 was just slow and I was a little dissapointed to be honest. After this fix the tourqe is sooo much more even along the whole rpm range (especially the real low end and high end), I cant thank the op enough for this fix, I feel like i am finally driving a sporty bmw again. I also had some idleing issues on cold starts before and I havent noticed it since the fix.

Regarding the $60, I talked to the manufacturer and If i can get 12 people who want them I can get the price reduced significantly. Otherwise for such low volume thats the best I can do for now. Hope this helps.

e9012345 · 09-12-2012, 10:13 AM

Quote:

Originally Posted by Tim603

In all honesty I have been driving with the Afe intake for about 6 months now and pretty much got used to how the car was driving, after I put in the spacer all I can say is wow, this is how the N52 engine is supposed to drive. For the longest time I though the N52 was just slow and I was a little dissapointed to be honest. After this fix the tourqe is sooo much more even along the whole rpm range (especially the real low end and high end), I cant thank the op enough for this fix, I feel like i am finally driving a sporty bmw again. I also had some idleing issues on cold starts before and I havent noticed it since the fix.

Regarding the $60, I talked to the manufacturer and If i can get 12 people who want them I can get the price reduced significantly. Otherwise for such low volume thats the best I can do for now. Hope this helps.

Hey, any word on the measurements for us Canadian folks yet?

ZeroSix · 09-13-2012, 05:03 PM

Quote:

Originally Posted by Tim603

In all honesty I have been driving with the Afe intake for about 6 months now and pretty much got used to how the car was driving, after I put in the spacer all I can say is wow, this is how the N52 engine is supposed to drive. For the longest time I though the N52 was just slow and I was a little dissapointed to be honest. After this fix the tourqe is sooo much more even along the whole rpm range (especially the real low end and high end), I cant thank the op enough for this fix, I feel like i am finally driving a sporty bmw again. I also had some idleing issues on cold starts before and I havent noticed it since the fix.

Regarding the $60, I talked to the manufacturer and If i can get 12 people who want them I can get the price reduced significantly. Otherwise for such low volume thats the best I can do for now. Hope this helps.

Ill be the first on the list

rich123321 · 09-14-2012, 08:19 AM

I'll be the second. I might just buy it within a few weeks if there isn't much interest

Tim603 · 09-14-2012, 08:48 AM

Quote:

Originally Posted by e9012345

Hey, any word on the measurements for us Canadian folks yet?

Alright so i got the measurments, let me know if you need any clarification on numbers. Good luck with the fix, let me know if you need any help!

e9012345 · 09-14-2012, 09:57 AM

Quote:

Originally Posted by Tim603

Alright so i got the measurments, let me know if you need any clarification on numbers. Good luck with the fix, let me know if you need any help!

DUDE, THANKS!

Tim603 · 09-14-2012, 10:13 AM

Quote:

Originally Posted by ohsix

Ill be the first on the list

Quote:

Originally Posted by rich123321

I'll be the second. I might just buy it within a few weeks if there isn't much interest

So if we get 12 people I can do $45 shipped with the bolts included.

1)ohsix
2)rich123321
3)

DaytonM_330xi · 09-14-2012, 10:46 AM

Is this a problem with just the 320 series? I have a 06 330xi and don't notice anything with my intake. If I get one of these, wonder if it would change anything.

rich123321 · 09-14-2012, 04:41 PM

Quote:

Originally Posted by DaytonM

Is this a problem with just the 320 series? I have a 06 330xi and don't notice anything with my intake. If I get one of these, wonder if it would change anything.

This is only if you have an aftermarket intake. I don't think it applies to the 330i

DaytonM_330xi · 09-14-2012, 05:34 PM

Oh sorry, I do have the AFE intake.

rich123321 · 09-15-2012, 12:15 AM

Quote:

Originally Posted by DaytonM

Oh sorry, I do have the AFE intake.

Well for me, I dont really notice anything "wrong". I feel that the intake got quieter due to incorrect MAF readings which also leads to decreased response and performance. IMO, I would join the list If i were you

DaytonM_330xi · 09-15-2012, 08:28 AM

Put me on the list too. I can always remove it if it doesn't produce a change.

rich123321 · 09-15-2012, 10:51 AM

When I get some extra money to play around with, I might just go ahead and pay the 60 bucks for it. I dont think the list will reach 12 people IMO. Then again, It may

Tim603 · 09-16-2012, 01:12 PM

Quote:

Originally Posted by rich123321

When I get some extra money to play around with, I might just go ahead and pay the 60 bucks for it. I dont think the list will reach 12 people IMO. Then again, It may

Rich123321 I tried pming you back but your inbox is full.

My gmail is timmcmahon.2011@gmail.com we can communicate that way if you prefer.

Tim603 · 09-16-2012, 01:14 PM

So if we get 12 people I can do $45 shipped with the bolts included.

1)ohsix
2)rich123321
3)daytonM
4)

09-16-2012, 01:14 PM	#66
Tim603 Lieutenant Drives: 2007 328xi coupe Join Date: Feb 2012 Location: Portsmouth Nh Posts: 505 iTrader: (1)	So if we get 12 people I can do $45 shipped with the bolts included. 1)ohsix 2)rich123321 3)daytonM 4) __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-08-2012, 11:20 PM	#45
ZeroSix Private Drives: 2006 BMW 325i Join Date: Dec 2011 Location: California Posts: 66 iTrader: (0) Garage List 2006 BMW 325i [5.00]	$60 is a little pricey for a block of aluminum...is it not?

09-10-2012, 07:10 PM	#50
rich123321 Captain Drives: BMW 325i E90 Join Date: Jan 2012 Location: South Florida Posts: 784 iTrader: (1) Garage List 2006 BMW E90 [4.17]	How does it feel after the spacer was put in ? I'd like one but 60 is kind of expensive

09-14-2012, 08:19 AM	#55
rich123321 Captain Drives: BMW 325i E90 Join Date: Jan 2012 Location: South Florida Posts: 784 iTrader: (1) Garage List 2006 BMW E90 [4.17]	I'll be the second. I might just buy it within a few weeks if there isn't much interest

09-14-2012, 10:46 AM	#59
DaytonM_330xi Enlisted Member Drives: 2006 330xi Join Date: Sep 2012 Location: St. Louis Posts: 43 iTrader: (0)	Is this a problem with just the 320 series? I have a 06 330xi and don't notice anything with my intake. If I get one of these, wonder if it would change anything.

09-14-2012, 05:34 PM	#61
DaytonM_330xi Enlisted Member Drives: 2006 330xi Join Date: Sep 2012 Location: St. Louis Posts: 43 iTrader: (0)	Oh sorry, I do have the AFE intake.

09-15-2012, 08:28 AM	#63
DaytonM_330xi Enlisted Member Drives: 2006 330xi Join Date: Sep 2012 Location: St. Louis Posts: 43 iTrader: (0)	Put me on the list too. I can always remove it if it doesn't produce a change.

09-15-2012, 10:51 AM	#64
rich123321 Captain Drives: BMW 325i E90 Join Date: Jan 2012 Location: South Florida Posts: 784 iTrader: (1) Garage List 2006 BMW E90 [4.17]	When I get some extra money to play around with, I might just go ahead and pay the 60 bucks for it. I dont think the list will reach 12 people IMO. Then again, It may