[Cloud1515]

Hey,

i switched from e46 to e92 and because my old inpa version didnt worked anymore i downloaded another one.
After hours of trying and swearing i finally got it to work. Now i wish i hadnt

Getting used to the slightly different interface of ncs expert i pressed F3 accidently. F3 is associated with "process car". It immediately started to write something. The provider of the software left his settings in the work folder and i guess it wrote his settings in my car.

I looked for the changes. Language changed, v=... shown in bc, time & units changed etc., nothing bad. But then i got the "service" warning.
passenger compartment filter has to be changed in 01/2007. This error wasnt there before. Car was built one year later.
The more dramatic thing is, it says i have to change my spark plugs in 40.000km. But i have a diesel! Reading the uploaders fsw/psw i found out he has/had a gasoline-engined car. How can i undo this? And what have i done? Does the whole car think its a petrolcar now? Im afraid to start the engine :x

Pretty annoying.
Hope someone can help me
and im sorry for my english.

[cn555ic]

Code Kombi and cas to default using expertmode

[Cloud1515]

Originally Posted by cn555ic

Code Kombi and cas to default using expertmode

With job "sg_reset"?

[cn555ic]

Use expertmode. F1 f3. Choose chasis choose Cas then hit process ecu. Choose cas and then use Sg_coderien and then execute. Do the same for Kombi

[jpirelli]

Now you have to fill her up with petrol

[Cloud1515]

Originally Posted by cn555ic

Use expertmode. F1 f3. Choose chasis choose Cas then hit process ecu. Choose cas and then use Sg_coderien and then execute. Do the same for Kombi

Worked. Thanks alot =)

Too bad that V= thing in the BC disappeared. And somehow car and phone cant communicate anymore. But im too tired to care.
Good night/day.

[cn555ic]

Originally Posted by Cloud1515

Worked. Thanks alot =)

Too bad that V= thing in the BC disappeared. And somehow car and phone cant communicate anymore. But im too tired to care.
Good night/day.

If that's the case just do exactly what u did above on the MULF module and code back to default. As for the bc speedo. That can be coded back later on after u solved all your issues. Good Luck

[Coding@DetailAddict]

Glad you got your problems solved. Fixing the MULF and KOMBI should be easy now.

[Cloud1515]

After setting everything to default i found out it was a problem by the mobile phone itself.

but everything works fine for now.

can be closed and thanks again.

[cn555ic]

Originally Posted by Cloud1515

After setting everything to default i found out it was a problem by the mobile phone itself.

but everything works fine for now.

can be closed and thanks again.

Glad u got it working.