E90Post
 


Heel & Toe Apparel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > DIY: Auto Transmission Fluid Change



Reply
 
Thread Tools Search this Thread
      07-12-2012, 11:11 PM   #111
shadowcoder
Captain
shadowcoder's Avatar
Greece
20
Rep
912
Posts

Drives: 2006 330i
Join Date: Mar 2006
Location: San Jose, CA / Orland Park, IL

iTrader: (1)

Perhaps a simple question for most. Given that the capacity is 9.5 lt, what is the
explanation that most in the thread do around 5-6lt for a drain and perhaps slightly
more with a pan/filter change too? Thanks.
Appreciate 0
      07-28-2012, 08:36 AM   #112
Chriztofor
Colonel
Chriztofor's Avatar
United_States
58
Rep
2,753
Posts

Drives: '06 325i and '13 X5
Join Date: Feb 2010
Location: Chicago Burbs

iTrader: (1)

Quote:
Originally Posted by shadowcoder View Post
Perhaps a simple question for most. Given that the capacity is 9.5 lt, what is the
explanation that most in the thread do around 5-6lt for a drain and perhaps slightly
more with a pan/filter change too? Thanks.
There is oil in the torque converter that you will not be able to get out without a professional flush machine. I use the drain and fill method without any problems so far.
__________________
If no codes are being thrown use Chevron Techron fuel injector cleaner (concentrate). It solves rpm fluctuating upon cold start-up. Also, for most BMW problems start off by scanning your car with the Peake Research Tool. It contains the actual BMW codes. If you want to register a newly installed battery for free (just buy a $10 cable) and google/download BMWLogger
Appreciate 0
      09-27-2012, 09:45 PM   #113
Snyperx
Lieutenant
United_States
38
Rep
514
Posts

Drives: 2006 325i (SOLD)
Join Date: Oct 2011
Location: Stoughon, WI

iTrader: (3)

Garage List
2006 BMW 325i  [0.00]
Great write up, but I can not find the Castrol Multi-Vehicle anywhere in my area. What other fluid can I use?
__________________
Regards,
SnyperX
Appreciate 0
      09-27-2012, 09:57 PM   #114
Chriztofor
Colonel
Chriztofor's Avatar
United_States
58
Rep
2,753
Posts

Drives: '06 325i and '13 X5
Join Date: Feb 2010
Location: Chicago Burbs

iTrader: (1)

Quote:
Originally Posted by Snyperx View Post
Great write up, but I can not find the Castrol Multi-Vehicle anywhere in my area. What other fluid can I use?
Take a look at posts 58 and 59 for other fluid ideas.
__________________
If no codes are being thrown use Chevron Techron fuel injector cleaner (concentrate). It solves rpm fluctuating upon cold start-up. Also, for most BMW problems start off by scanning your car with the Peake Research Tool. It contains the actual BMW codes. If you want to register a newly installed battery for free (just buy a $10 cable) and google/download BMWLogger
Appreciate 0
      09-28-2012, 09:59 AM   #115
Snyperx
Lieutenant
United_States
38
Rep
514
Posts

Drives: 2006 325i (SOLD)
Join Date: Oct 2011
Location: Stoughon, WI

iTrader: (3)

Garage List
2006 BMW 325i  [0.00]
I just talked with Jack at ECS Tuning and he also said that this kit will work for my transmission:

http://www.ecstuning.com/BMW-E90-325....0L/ES2523893/
__________________
Regards,
SnyperX

Last edited by Snyperx; 09-28-2012 at 10:10 AM.
Appreciate 0
      10-05-2012, 11:26 AM   #116
maf330xi
First Lieutenant
maf330xi's Avatar
Canada
12
Rep
341
Posts

Drives: 06 BMW 330xi
Join Date: Sep 2010
Location: Toronto

iTrader: (2)

When replacing the oil pan/filter + draining and filling new fluid + new sleeve...is there any need to reset any modules?

I've read that there is a way to reset the transmission adaptations using the 30 second throttle down method (but I've heard mixed reviews on whether its just a placebo effect)

Do I have to go to the dealership and ask them to reset it for me?
__________________


Blacklines | 19" Morr VS8.2 | Gloss Black Grilles | PE | M-Tech | KW V1 | Euro Spec Headlights
Appreciate 0
      10-05-2012, 11:29 AM   #117
Snyperx
Lieutenant
United_States
38
Rep
514
Posts

Drives: 2006 325i (SOLD)
Join Date: Oct 2011
Location: Stoughon, WI

iTrader: (3)

Garage List
2006 BMW 325i  [0.00]
Well I have a laptop with INPA on it and can reset the adaptions via that.
__________________
Regards,
SnyperX
Appreciate 0
      10-05-2012, 07:21 PM   #118
Chriztofor
Colonel
Chriztofor's Avatar
United_States
58
Rep
2,753
Posts

Drives: '06 325i and '13 X5
Join Date: Feb 2010
Location: Chicago Burbs

iTrader: (1)

Quote:
Originally Posted by maf330xi
When replacing the oil pan/filter + draining and filling new fluid + new sleeve...is there any need to reset any modules?

I've read that there is a way to reset the transmission adaptations using the 30 second throttle down method (but I've heard mixed reviews on whether its just a placebo effect)

Do I have to go to the dealership and ask them to reset it for me?
There is a way to reset adaptations (do a search) but make sure you are not venting your water pump which one of the steps requires you to press on the gas pedal (while engine is off). If you find the guide/instructions post them here. Thx. Edit: Note: I never reset my adaptations.
__________________
If no codes are being thrown use Chevron Techron fuel injector cleaner (concentrate). It solves rpm fluctuating upon cold start-up. Also, for most BMW problems start off by scanning your car with the Peake Research Tool. It contains the actual BMW codes. If you want to register a newly installed battery for free (just buy a $10 cable) and google/download BMWLogger
Appreciate 0
      10-08-2012, 10:54 AM   #119
Snyperx
Lieutenant
United_States
38
Rep
514
Posts

Drives: 2006 325i (SOLD)
Join Date: Oct 2011
Location: Stoughon, WI

iTrader: (3)

Garage List
2006 BMW 325i  [0.00]
I just wanted to add that in talking with the Dealer and some other folks mixing ATF fluid IS NOT recommended. If your transmission requires ZF transmission fluid use ZF transmission fluid. You can reference this doc as well:

http://www.thectsc.com/images/pdf/flier_lifeguard3.pdf
__________________
Regards,
SnyperX
Appreciate 0
      10-10-2012, 12:51 AM   #120
Chriztofor
Colonel
Chriztofor's Avatar
United_States
58
Rep
2,753
Posts

Drives: '06 325i and '13 X5
Join Date: Feb 2010
Location: Chicago Burbs

iTrader: (1)

Quote:
Originally Posted by Snyperx View Post
I just wanted to add that in talking with the Dealer and some other folks mixing ATF fluid IS NOT recommended. If your transmission requires ZF transmission fluid use ZF transmission fluid. You can reference this doc as well:

http://www.thectsc.com/images/pdf/flier_lifeguard3.pdf
You can use any ATF fluid so long as it has the proper specifications. The Castrol oil I use has the proper specs for ZF transmissions. See the attached spec sheet in post 1. Also, don't put a lot of faith in what dealers state. They misinform customers and sometimes make shoddy repairs. I base my statement from personal experience and by reading horror stories on this forum.
__________________
If no codes are being thrown use Chevron Techron fuel injector cleaner (concentrate). It solves rpm fluctuating upon cold start-up. Also, for most BMW problems start off by scanning your car with the Peake Research Tool. It contains the actual BMW codes. If you want to register a newly installed battery for free (just buy a $10 cable) and google/download BMWLogger
Appreciate 0
      10-16-2012, 03:40 PM   #121
Snyperx
Lieutenant
United_States
38
Rep
514
Posts

Drives: 2006 325i (SOLD)
Join Date: Oct 2011
Location: Stoughon, WI

iTrader: (3)

Garage List
2006 BMW 325i  [0.00]
Well I did the filter fluid this weekend using the kit from the website listed above. I put about 5 quarts back in.

1. I drained it first.
2. Pulled the filter off.
3. Installed new filter.
4. Filled with new oil until it came out of the fill hole.
5. Started car.
6. Shifted gears.
7. Let run for about 8 minutes.
8. Turned off added about another 1/2 to 1 quart (about 4.5 to 5 total) until it came out of fill hole again.
9. Put plug back in.
10. Done.

I am just nervous that I didn't fill it enough, but couldn't really get more fluid in if its coming out the fill hole after running the engine and shifting through the gears. I do have one quart left over out of the 6.
__________________
Regards,
SnyperX
Appreciate 0
      10-16-2012, 08:33 PM   #122
acthad
Private First Class
acthad's Avatar
United_States
2
Rep
110
Posts

Drives: 08 M3/6, 07 X5 Sport
Join Date: Oct 2009
Location: Chicago

iTrader: (0)

Thanks for the DIY! Also just ordered from thectsc.com

I just spoke with the owner of thectsc.com, Klaus, and wanted to give him a customer service props. He made sure that my order was going to the right address.

Nice guy putting his kid through college, he's a former ZF Engineer and knows his stuff. He has been working with ZF for 32 years, now is distributing product as a small business.

He cautioned me on the mechatronic sleeve install, you have to love all the free install info he has posted.

Also he hand delivered my parts to FedEX after his last FedEX pickup out of his office. ~Nice.

So I got a transmission oil service kit with a new Mechatronic Sleeve, saved at least $200 over dealer prices! Thanks CTSC!

Will post how my install of the parts went later on.

Thanks again for posting this DIY!!!
__________________
Current: 08 M3/4/6MT, Jerez/Black Novillo, CF, Premium, CA Winter, Tech, EDC, 19's

07 X5 Black Sapphire/Black Nevada Leather/Burl Walnut Premium, Sport, Adaptive, Active Steering, Nav, Comfort Access, Cold Weather I/II, CD Changer, Adaptive Xenons, Style 211s

Last edited by acthad; 10-16-2012 at 10:38 PM.
Appreciate 0
      10-18-2012, 07:32 PM   #123
Chriztofor
Colonel
Chriztofor's Avatar
United_States
58
Rep
2,753
Posts

Drives: '06 325i and '13 X5
Join Date: Feb 2010
Location: Chicago Burbs

iTrader: (1)

Quote:
Originally Posted by acthad View Post
I just spoke with the owner of thectsc.com, Klaus, and wanted to give him a customer service props. He made sure that my order was going to the right address.

Nice guy putting his kid through college, he's a former ZF Engineer and knows his stuff. He has been working with ZF for 32 years, now is distributing product as a small business.

He cautioned me on the mechatronic sleeve install, you have to love all the free install info he has posted.

Also he hand delivered my parts to FedEX after his last FedEX pickup out of his office. ~Nice.

So I got a transmission oil service kit with a new Mechatronic Sleeve, saved at least $200 over dealer prices! Thanks CTSC!

Will post how my install of the parts went later on.

Thanks again for posting this DIY!!!
No problem, keep us posted! Good luck!
__________________
If no codes are being thrown use Chevron Techron fuel injector cleaner (concentrate). It solves rpm fluctuating upon cold start-up. Also, for most BMW problems start off by scanning your car with the Peake Research Tool. It contains the actual BMW codes. If you want to register a newly installed battery for free (just buy a $10 cable) and google/download BMWLogger
Appreciate 0
      11-02-2012, 12:17 AM   #124
acthad
Private First Class
acthad's Avatar
United_States
2
Rep
110
Posts

Drives: 08 M3/6, 07 X5 Sport
Join Date: Oct 2009
Location: Chicago

iTrader: (0)

Did Pan/Filter Oil Change and unable to top off...

Hi,
So I ordered the trans oil change kit from thecstsc.com for my n52/ZF 6 Spd Auto

I am not sure how much fluid I had to begin with since I had a leaking trans pan.

So I drained about 3.5-5.5 quarts cold, changed the pan/filter. Then when cold I was only able to add 2.8 qts back in. But I realized later the car was not level.

I could not get the car perfectly level with mismatched jack stands, so I jacked up the rear an inch to compensate and level the car out during the fill process.

So I closed the drain plug, warmed up the car, shifted through the gears until I got a transmission malfunction warning light. I got the same metallic tapping sound that others had mentioned during this time from the trans. I warmed up the car about 10 mins, the pan was still cold, but it took me a few minutes to undo the fill plug with the allen wrench.

I was worried it would be too hot to work on, but it never got hot since it is cold in Chicago now ~45 degrees F ambient in my garage. I just kept pumping until all 6 bottles of my ZF Lifeguard6 were empty. So 6 Liters in all.

I shut the motor off to try to combine some of the leftover clean oil from the bottom of the bottles. When I started it back up to fill another .3 Liter, the trans malfunction indicator and metallic tapping sound went away, whew! Next I shifted through the gears again, then pumped the .3 liter I had left.

Put 6 Liters in and it still did not overflow out the fill hole. So I must have been pretty low with my leak. Per a previous post it can hold up to 9.5 Liters? So I cannot overfill it right? Should I buy 3-4 more liters? Since the torque converter can hold ~ 1 liter etc?

I was tempted to use the old oil to top it off, but it was pretty dark since the leak may have sucked in dirt when under vacuum. I had jerky performance on the 2-3 gear changed, and sport mode would give me whiplash sometimes. I wonder if those traits will go away after this service.

Or should I just see how it drives, then decide whether to buy more oil?

Thanks in Advance!
__________________
Current: 08 M3/4/6MT, Jerez/Black Novillo, CF, Premium, CA Winter, Tech, EDC, 19's

07 X5 Black Sapphire/Black Nevada Leather/Burl Walnut Premium, Sport, Adaptive, Active Steering, Nav, Comfort Access, Cold Weather I/II, CD Changer, Adaptive Xenons, Style 211s

Last edited by acthad; 11-02-2012 at 12:26 AM.
Appreciate 0
      11-02-2012, 02:00 AM   #125
Chriztofor
Colonel
Chriztofor's Avatar
United_States
58
Rep
2,753
Posts

Drives: '06 325i and '13 X5
Join Date: Feb 2010
Location: Chicago Burbs

iTrader: (1)

Quote:
Originally Posted by acthad View Post
Hi,
So I ordered the trans oil change kit from thecstsc.com for my n52/ZF 6 Spd Auto

I am not sure how much fluid I had to begin with since I had a leaking trans pan.

So I drained about 3.5-5.5 quarts cold, changed the pan/filter. Then when cold I was only able to add 2.8 qts back in. But I realized later the car was not level.

I could not get the car perfectly level with mismatched jack stands, so I jacked up the rear an inch to compensate and level the car out during the fill process.

So I closed the drain plug, warmed up the car, shifted through the gears until I got a transmission malfunction warning light. I got the same metallic tapping sound that others had mentioned during this time from the trans. I warmed up the car about 10 mins, the pan was still cold, but it took me a few minutes to undo the fill plug with the allen wrench.

I was worried it would be too hot to work on, but it never got hot since it is cold in Chicago now ~45 degrees F ambient in my garage. I just kept pumping until all 6 bottles of my ZF Lifeguard6 were empty. So 6 Liters in all.

I shut the motor off to try to combine some of the leftover clean oil from the bottom of the bottles. When I started it back up to fill another .3 Liter, the trans malfunction indicator and metallic tapping sound went away, whew! Next I shifted through the gears again, then pumped the .3 liter I had left.

Put 6 Liters in and it still did not overflow out the fill hole. So I must have been pretty low with my leak. Per a previous post it can hold up to 9.5 Liters? So I cannot overfill it right? Should I buy 3-4 more liters? Since the torque converter can hold ~ 1 liter etc?

I was tempted to use the old oil to top it off, but it was pretty dark since the leak may have sucked in dirt when under vacuum. I had jerky performance on the 2-3 gear changed, and sport mode would give me whiplash sometimes. I wonder if those traits will go away after this service.

Or should I just see how it drives, then decide whether to buy more oil?

Thanks in Advance!
When your trans is warm I would open the fill plug and top off. Keep in mind, you are at the correct fluid level when oil comes out the fill plug, so technically if oil doesn't come out, it was low and you are not really topping off. NOTE: Don't open the fill plug when the trans is cold; it will gush out.
__________________
If no codes are being thrown use Chevron Techron fuel injector cleaner (concentrate). It solves rpm fluctuating upon cold start-up. Also, for most BMW problems start off by scanning your car with the Peake Research Tool. It contains the actual BMW codes. If you want to register a newly installed battery for free (just buy a $10 cable) and google/download BMWLogger
Appreciate 0
      11-02-2012, 09:49 AM   #126
acthad
Private First Class
acthad's Avatar
United_States
2
Rep
110
Posts

Drives: 08 M3/6, 07 X5 Sport
Join Date: Oct 2009
Location: Chicago

iTrader: (0)

I just realized I had the car tilted front down and rear up...

I forgot I raised the rear jack stands that were too low, during this process I forgot to lower the rear back down on the jacks, and so I think all the oil was forward in the transmission case.

I feel if I level it and check it warm it will/may leak out, so I am tempted to drive it first and see how it shifts.

The fun of working overtired on your car late at night... We do it for the love of the BMW/Car Hobby!
__________________
Current: 08 M3/4/6MT, Jerez/Black Novillo, CF, Premium, CA Winter, Tech, EDC, 19's

07 X5 Black Sapphire/Black Nevada Leather/Burl Walnut Premium, Sport, Adaptive, Active Steering, Nav, Comfort Access, Cold Weather I/II, CD Changer, Adaptive Xenons, Style 211s
Appreciate 0
      11-03-2012, 10:49 AM   #127
Chriztofor
Colonel
Chriztofor's Avatar
United_States
58
Rep
2,753
Posts

Drives: '06 325i and '13 X5
Join Date: Feb 2010
Location: Chicago Burbs

iTrader: (1)

Quote:
Originally Posted by acthad View Post
I forgot I raised the rear jack stands that were too low, during this process I forgot to lower the rear back down on the jacks, and so I think all the oil was forward in the transmission case.

I feel if I level it and check it warm it will/may leak out, so I am tempted to drive it first and see how it shifts.

The fun of working overtired on your car late at night... We do it for the love of the BMW/Car Hobby!
The only thing is that you don't want it overfilled either. Too bad BMW didn't just add a dipstick, I would pay $200 for that option. Ugh.

By the way, it is ok if it leaks out, that is how you know it has the proper level.
__________________
If no codes are being thrown use Chevron Techron fuel injector cleaner (concentrate). It solves rpm fluctuating upon cold start-up. Also, for most BMW problems start off by scanning your car with the Peake Research Tool. It contains the actual BMW codes. If you want to register a newly installed battery for free (just buy a $10 cable) and google/download BMWLogger
Appreciate 0
      11-03-2012, 03:13 PM   #128
acthad
Private First Class
acthad's Avatar
United_States
2
Rep
110
Posts

Drives: 08 M3/6, 07 X5 Sport
Join Date: Oct 2009
Location: Chicago

iTrader: (0)

Well finished the job finally

Bought 3 more quarts from the dealer @$30/qt OUCH. Did not want to mail order then have to pay return shipping, so it is about the same in my case.

Anyways, I was still low, the car was not tilted up in the rear but down compared with the front. So I warmed up the trans again, then I re-leveled the car perfectly with a jack and checked with a good level.

I got in another 1.3 qts, so in all after the drain and flush, it took me ~7.3 qts to do the job. So now I am paranoid I was driving it around too long ~1.3 qts low.

But like others quoting exmaxima1 in this thread

1. The 2-3 shift in Normal mode is MUCH smoother
2. The 1-2 shift in Sport mode is firm but "civilized"
3. The higher gear lockups seems firmer and better connected---less slipping.
4. The Sport mode downshifts are much better as well. It doesn't feel like it's trying to throw me thru the windshield when coming to a stop.
5. Full throttle gear changes in both modes seem solid and tight.

Thanks guys for your help!

Now to return as much stuff I bought for this service that I did not use back to the dealer/stores!
__________________
Current: 08 M3/4/6MT, Jerez/Black Novillo, CF, Premium, CA Winter, Tech, EDC, 19's

07 X5 Black Sapphire/Black Nevada Leather/Burl Walnut Premium, Sport, Adaptive, Active Steering, Nav, Comfort Access, Cold Weather I/II, CD Changer, Adaptive Xenons, Style 211s
Appreciate 0
      11-03-2012, 06:02 PM   #129
Chriztofor
Colonel
Chriztofor's Avatar
United_States
58
Rep
2,753
Posts

Drives: '06 325i and '13 X5
Join Date: Feb 2010
Location: Chicago Burbs

iTrader: (1)

Quote:
Originally Posted by acthad View Post
Bought 3 more quarts from the dealer @$30/qt OUCH. Did not want to mail order then have to pay return shipping, so it is about the same in my case.

Anyways, I was still low, the car was not tilted up in the rear but down compared with the front. So I warmed up the trans again, then I re-leveled the car perfectly with a jack and checked with a good level.

I got in another 1.3 qts, so in all after the drain and flush, it took me ~7.3 qts to do the job. So now I am paranoid I was driving it around too long ~1.3 qts low.

But like others quoting exmaxima1 in this thread

1. The 2-3 shift in Normal mode is MUCH smoother
2. The 1-2 shift in Sport mode is firm but "civilized"
3. The higher gear lockups seems firmer and better connected---less slipping.
4. The Sport mode downshifts are much better as well. It doesn't feel like it's trying to throw me thru the windshield when coming to a stop.
5. Full throttle gear changes in both modes seem solid and tight.

Thanks guys for your help!

Now to return as much stuff I bought for this service that I did not use back to the dealer/stores!
Glad it worked out! Keep us posted!
__________________
If no codes are being thrown use Chevron Techron fuel injector cleaner (concentrate). It solves rpm fluctuating upon cold start-up. Also, for most BMW problems start off by scanning your car with the Peake Research Tool. It contains the actual BMW codes. If you want to register a newly installed battery for free (just buy a $10 cable) and google/download BMWLogger
Appreciate 0
      11-03-2012, 10:02 PM   #130
acthad
Private First Class
acthad's Avatar
United_States
2
Rep
110
Posts

Drives: 08 M3/6, 07 X5 Sport
Join Date: Oct 2009
Location: Chicago

iTrader: (0)

e90 Trans Flush Service DIY Tips

Hi,
So I just test drove my car after the job earlier, and got back to my house and put it back up on jack stands to check for leaks. AND there were leaks! !@#@#$!!!

So things to watch out for, use a high quality lightweight torque wrench so it is easier to handle for smaller guys like myself. I checked the pan's torx bolts 2X before, but after a heat cycle in the oil pan, 3-4 bolts were loose! So I torqued the torx bolt via the tightening 'star' procedure per ZF's instructions for a 3rd time with my heavy Harbor Freight 3/8" drive torque wrench and 6in extension and the T40 Torx socket. It is PITA trying to brace the torque wrench upside down on the garage floor! But after a 3rd time, it no longer had leaks.

My fill plug was also leaking, I could not tighten further before my test drive, even with the open ended wrench on it for leverage. But after the trans was hot from the test drive, I was able to tighten the fill plug (without leverage) until it made a creaking sound of being tightened. (I had the same sound when breaking the bolt loose in the beginning of the diy. I noticed my fill/drain plugs on my e36 manual trans work this way too.)

Also don't use ramps to elevate front of the car and jack stands in the rear. For some reason my front wheels had enough slack in them, even while in Park, or I did not realize even an xi in park is the same as a rwd e90. I jacked the rear up, the car gets pulled back so it could roll off the ramps! So 4 jack stands only for this job.

The exhaust trans bracket where it braces the 2 exhaust pipes with a double tube clamp gave me trouble. I removed this to get better clearance to the fill plug on top of the trans. It had a one time use bolt that snapped when removing the bolt that holds the bracket for the exhaust pipes. It had loctite from the factory, and the bolt is designed to snap off for removal. I ended up chiseling the broken bolt out from the threaded hole, then had to retap it for 8mm 1.25 pich thread bolt. Found another M8X50 bolt at my local hardware store, with a 13mm bolt head, and used this with loctite on the head vs the threads so I could get a chance to undo this bolt again if necessary.

Buy extra trans fluid if you had a known leak.

Be careful with the lifetime trans fluid, it has a strong odor, and will not come off your clothes.

The trans does not have to be scalding hot like it is during the summer in order to open the fill plug and to fill the trans. The trans never got hot for me and was cool to the touch vs warm/hot, the exhaust was way hotter. 10-15 minutes during the fall is sufficient.

It is a messy job, so it is not a bad idea to buy a Pig Mat for under the car to protect your garage floor. A pack them are $3 from Advance Auto.

If you need tools, check out harborfreight.com for the 8mm Allen Wrench and 10mm Socket if you do not have tools, they have everything you need for less.

Hope this helps another novice weekend transmission mechanic out.
__________________
Current: 08 M3/4/6MT, Jerez/Black Novillo, CF, Premium, CA Winter, Tech, EDC, 19's

07 X5 Black Sapphire/Black Nevada Leather/Burl Walnut Premium, Sport, Adaptive, Active Steering, Nav, Comfort Access, Cold Weather I/II, CD Changer, Adaptive Xenons, Style 211s
Appreciate 0
      11-05-2012, 05:57 PM   #131
acthad
Private First Class
acthad's Avatar
United_States
2
Rep
110
Posts

Drives: 08 M3/6, 07 X5 Sport
Join Date: Oct 2009
Location: Chicago

iTrader: (0)

No leaks and did a Throttle Body Adaption Reset too

Only drove it ~20 miles so far, but no leaks and did the throttle body adpation reset. So far happy with my work, smoother shifts, and higher mpg's, picked up 1-2 mpg's in city/hwy combined driving.
__________________
Current: 08 M3/4/6MT, Jerez/Black Novillo, CF, Premium, CA Winter, Tech, EDC, 19's

07 X5 Black Sapphire/Black Nevada Leather/Burl Walnut Premium, Sport, Adaptive, Active Steering, Nav, Comfort Access, Cold Weather I/II, CD Changer, Adaptive Xenons, Style 211s
Appreciate 0
      11-30-2012, 05:10 AM   #132
raven169
Registered
0
Rep
4
Posts

Drives: 325i e90
Join Date: Nov 2012
Location: NorCal

iTrader: (0)

Thanks for the write up and pics. Going to do this DIY fluid change on my car very soon!
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:03 AM.




e90post
e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST