HELLA FLUSH E92's??? - Page 26 - BMW 3-Series (E90 E92) Forum

project335i · 09-27-2012, 10:31 AM

Quote:

Originally Posted by Hai_Cheo

unsure if 18's or 19's yet, gotta see how low those cars actually get and what kind of sizing I can run, but should be interesting

You can get them down pretty good depending on the set up, and you would most likely have to rebarell the old wheels if you want them to be aggressive on the e92

Hai_Cheo · 09-27-2012, 10:36 AM

hmm interesting, the fronts are 10' and rears 11.5'' idk how much wider those cars can go but if they comfortably fit a 12-13'' this should be real fun

project335i · 09-27-2012, 11:26 AM

Quote:

Originally Posted by Hai_Cheo

hmm interesting, the fronts are 10' and rears 11.5'' idk how much wider those cars can go but if they comfortably fit a 12-13'' this should be real fun

I think they are good for 10.5-11 front and 12 or a bit higher rear. They should be atleast that cause im running your old set up on my e90 335

Hai_Cheo · 09-27-2012, 12:01 PM

Really? e90's take the same sizing as e46Ms??? Interesting, is your rear et +4? i'm only asking because a buddy of mine just bought an e90 not too long ago and he's been pestering me about buyin the LHRs but unsure of whether they'd fit.

project335i · 09-27-2012, 12:08 PM

Quote:

Originally Posted by Hai_Cheo

Really? e90's take the same sizing as e46Ms??? Interesting, is your rear et +4? i'm only asking because a buddy of mine just bought an e90 not too long ago and he's been pestering me about buyin the LHRs but unsure of whether they'd fit.

My offset is pretty low but not that low.The norm around here is 8.5 front 10 rear, mine are not so common but with a little effort they work. I don't know how the LHR will be for the e90 just tell him to chop the fender lips and test fit them on.

Hai_Cheo · 09-27-2012, 02:00 PM

Quote:

Originally Posted by project335i

My offset is pretty low but not that low.The norm around here is 8.5 front 10 rear, mine are not so common but with a little effort they work. I don't know how the LHR will be for the e90 just tell him to chop the fender lips and test fit them on.

lmao with enough work anything will fit

project335i · 09-27-2012, 02:10 PM

Quote:

Originally Posted by Hai_Cheo

lmao with enough work anything will fit

I hear that bro if there's a will theres always a way

Pe90X · 09-28-2012, 06:52 AM

i think i can finaly play?

[IMG]

[/IMG]

[IMG]

[/IMG]

project335i · 09-28-2012, 07:54 AM

^^Looks good maybe a smaller spacer upfront to match the back?

Pe90X · 09-28-2012, 11:39 AM

^ thanx bud, however i have no spacers?
19"x 9.5 F/ 10.5 R et20/22
225-40/255/35
h&r s springs.
fitment is excellent, ride is great i just dont like the rebound of my oem struts

project335i · 09-28-2012, 12:21 PM

Quote:

Originally Posted by Pe90X

^ thanx bud, however i have no spacers?
19"x 9.5 F/ 10.5 R et20/22
225-40/255/35
h&r s springs.
fitment is excellent, ride is great i just dont like the rebound of my oem struts

I didn't mean you have spacers I meant you should get a small spacer for the front to make it more flush like the rear

EDM92 · 09-28-2012, 12:29 PM

Quote:

Originally Posted by Lowandslow115

Are these 19 or 18 cause I'm super low and I'm not sure what wheels to run for next summer

They are 19s. You can pull off an amazing stance with both 18s and 19s. 18s will obviously make you scrape the bottom of your car a little more, but thats the point right? Don't go with 17s or 20s.

PSUSMU · 09-28-2012, 12:32 PM

Quote:

Originally Posted by Pe90X

^ thanx bud, however i have no spacers?
19"x 9.5 F/ 10.5 R et20/22
225-40/255/35
h&r s springs.
fitment is excellent, ride is great i just dont like the rebound of my oem struts

40/35 series on 19"? Doing it wrong.. also you need coilovers. Spring don't cut it.
I'm nearly the same at 9.5" et19 and 11" et32 on E90 LCI. I need to camber the fronts more.

Pe90X · 09-28-2012, 05:04 PM

^ thanx for the input. but for what they are these springs are workn dam good. id hate to spend over 1k for suspension thats too stiff for my liking.
..... lets see some more cars

Hai_Cheo · 09-28-2012, 11:31 PM

So get dampening adjustment coils?

onesuperboi · 09-29-2012, 02:00 PM

Quote:

Originally Posted by Pe90X

^ thanx bud, however i have no spacers?
19"x 9.5 F/ 10.5 R et20/22
225-40/255/35
h&r s springs.
fitment is excellent, ride is great i just dont like the rebound of my oem struts

I want to copy your setup! It's super clean.

Any extra camber?

Pe90X · 09-29-2012, 11:28 PM

lol thanx bro..i believe to be technically correct i should have ran 235/35 F - and 365/30 rear? but i had these tires sitting on a pair of un-used rims so i said what the hey!?

Lowandslow115 · 10-02-2012, 06:12 PM

Quote:

Originally Posted by EDM92

They are 19s. You can pull off an amazing stance with both 18s and 19s. 18s will obviously make you scrape the bottom of your car a little more, but thats the point right? Don't go with 17s or 20s.

yea it was between 18s or 19s, i got a wrecked pair of style 5s and im having rotiform make me lips i was thinking 3 inch slant lips, and yes scraping is the point. pretty sure i was the lowest e90 at h20i but i want to go lower, teeter totter speed bump status

Verbiage · 10-03-2012, 07:27 AM

Quote:

Originally Posted by PSUSMU

40/35 series on 19"? Doing it wrong.. also you need coilovers. Spring don't cut it.

yes, yes.. we know.

PSUSMU · 10-03-2012, 08:11 AM

Quote:

Originally Posted by Verbiage

yes, yes.. we know.

Hahaha

STICKY335 · 10-03-2012, 05:02 PM

No pictures at the moment but need some advice,

Current setup e92:
18x9 235/40/18 +27
18x10 265/35/18 +30

How much more would you space it out to be getting a nice stance?

Hooy · 10-03-2012, 06:58 PM

Quote:

Originally Posted by STICKY335

No pictures at the moment but need some advice,

Current setup e92:
18x9 235/40/18 +27
18x10 265/35/18 +30

How much more would you space it out to be getting a nice stance?

5mm rear, 10mm front

09-28-2012, 06:52 AM	#558
Pe90X Second Lieutenant Drives: xX AWD-BmmR Xx Join Date: Jan 2012 Location: south TX Posts: 258 iTrader: (1)	i think i can finaly play? [IMG][/IMG] [IMG][/IMG] __________________ 2008 XI, RB's, ECS 3"chargepipe Synapse BOV, CPE Kitty-less DP's, Hks SS Exhaust, Dual Cone Intake, G5 Iso, VW Meth kit, H&R sports + Bilstien, 19's!, M3 Rep-front, LED Halos,M6 shiftknob, 500HP bound!!

09-28-2012, 11:39 AM	#560
Pe90X Second Lieutenant Drives: xX AWD-BmmR Xx Join Date: Jan 2012 Location: south TX Posts: 258 iTrader: (1)	^ thanx bud, however i have no spacers? 19"x 9.5 F/ 10.5 R et20/22 225-40/255/35 h&r s springs. fitment is excellent, ride is great i just dont like the rebound of my oem struts __________________ 2008 XI, RB's, ECS 3"chargepipe Synapse BOV, CPE Kitty-less DP's, Hks SS Exhaust, Dual Cone Intake, G5 Iso, VW Meth kit, H&R sports + Bilstien, 19's!, M3 Rep-front, LED Halos,M6 shiftknob, 500HP bound!!

09-28-2012, 05:04 PM	#564
Pe90X Second Lieutenant Drives: xX AWD-BmmR Xx Join Date: Jan 2012 Location: south TX Posts: 258 iTrader: (1)	^ thanx for the input. but for what they are these springs are workn dam good. id hate to spend over 1k for suspension thats too stiff for my liking. ..... lets see some more cars __________________ 2008 XI, RB's, ECS 3"chargepipe Synapse BOV, CPE Kitty-less DP's, Hks SS Exhaust, Dual Cone Intake, G5 Iso, VW Meth kit, H&R sports + Bilstien, 19's!, M3 Rep-front, LED Halos,M6 shiftknob, 500HP bound!!

09-29-2012, 11:28 PM	#567
Pe90X Second Lieutenant Drives: xX AWD-BmmR Xx Join Date: Jan 2012 Location: south TX Posts: 258 iTrader: (1)	lol thanx bro..i believe to be technically correct i should have ran 235/35 F - and 365/30 rear? but i had these tires sitting on a pair of un-used rims so i said what the hey!? __________________ 2008 XI, RB's, ECS 3"chargepipe Synapse BOV, CPE Kitty-less DP's, Hks SS Exhaust, Dual Cone Intake, G5 Iso, VW Meth kit, H&R sports + Bilstien, 19's!, M3 Rep-front, LED Halos,M6 shiftknob, 500HP bound!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-27-2012, 10:36 AM	#552
Hai_Cheo Private First Class Drives: E92 M3 Join Date: Sep 2012 Location: Miami Posts: 136 iTrader: (0)	hmm interesting, the fronts are 10' and rears 11.5'' idk how much wider those cars can go but if they comfortably fit a 12-13'' this should be real fun

09-27-2012, 12:01 PM	#554
Hai_Cheo Private First Class Drives: E92 M3 Join Date: Sep 2012 Location: Miami Posts: 136 iTrader: (0)	Really? e90's take the same sizing as e46Ms??? Interesting, is your rear et +4? i'm only asking because a buddy of mine just bought an e90 not too long ago and he's been pestering me about buyin the LHRs but unsure of whether they'd fit.

09-28-2012, 07:54 AM	#559
project335i BimmerPost Supporting Vendor Drives: Wide Load Join Date: Mar 2011 Location: SAUGA Posts: 4,262 iTrader: (6)	^^Looks good maybe a smaller spacer upfront to match the back?

09-28-2012, 11:31 PM	#565
Hai_Cheo Private First Class Drives: E92 M3 Join Date: Sep 2012 Location: Miami Posts: 136 iTrader: (0)	So get dampening adjustment coils?

10-03-2012, 05:02 PM	#571
STICKY335 Captain Drives: E92 335i Coupe Join Date: Apr 2009 Location: SoCal Posts: 870 iTrader: (6)	No pictures at the moment but need some advice, Current setup e92: 18x9 235/40/18 +27 18x10 265/35/18 +30 How much more would you space it out to be getting a nice stance?