Active Autowerke | N52 Signature Exhaust - Page 16 - BMW 3-Series (E90 E92) Forum

ZeroSix · 09-28-2012, 02:49 PM

This is a 2006 E90 325i 3.0L N52. Instead of $50 it was $150 for install.

This is the picture of the stock muffler.

Here it is with the custom pipe.

GermanMuscle · 09-28-2012, 09:41 PM

It's 50 to cut and weld at my local shop, but of course my was a direct fit and it cost me 40.

NuBeetle · 09-29-2012, 12:57 PM

Andrew, pls kindly quote me THE BEST price shipped to Hong Kong.
Besides that, pls confirm if the AA exhaust suitable for my ride which is a 2011 2.5L (N52N engine) 323i. Thanks!

dt604 · 10-01-2012, 02:23 PM

Interested in this exhaust set up, aside from that does a charcoal delete improves the n52 capabilities ? Cuz right now I have the k&n / air scoop but not sure if I should do a charcoal

Andrew@ActiveAutowerke · 10-01-2012, 02:47 PM

Quote:

Originally Posted by dt604

Interested in this exhaust set up, aside from that does a charcoal delete improves the n52 capabilities ? Cuz right now I have the k&n / air scoop but not sure if I should do a charcoal

We do them all the time it should help a little bit.

dt604 · 10-02-2012, 02:02 PM

Would it harm the engine in any way ? Correct me if I am wrong charcoal filter is there to help carbon build up ?

CombatNinja · 10-02-2012, 02:36 PM

Wrong.

1QuikWS6 · 10-02-2012, 02:37 PM

Quote:

Originally Posted by dt604

Would it harm the engine in any way ? Correct me if I am wrong charcoal filter is there to help carbon build up ?

Charcoal filter is an Emissions Device - it keeps hydrocarbon emissions from getting OUT of engine and being released into atmosphere.

Not there to keep anything from getting IN to the engine...

dt604 · 10-02-2012, 03:42 PM

typo ment to write prevent to -__-, so basically its just something to prevent the carbon to being released in the ozone layer right ?

1QuikWS6 · 10-02-2012, 03:46 PM

Quote:

Originally Posted by dt604

typo ment to write prevent to -__-, so basically its just something to prevent the carbon to being released in the ozone layer right ?

Isn't that what I just stated in post right above

dt604 · 10-02-2012, 04:15 PM

Yeah , what meant to type in the beginning -_- that seems to be a very falwed design, what would I use to cut out the charcoal filter then.

1QuikWS6 · 10-02-2012, 04:25 PM

Quote:

Originally Posted by dt604

Yeah , what meant to type in the beginning -_- that seems to be a very falwed design, what would I use to cut out the charcoal filter then.

I'd prolly use a Dremel. Here's link to DIY:

http://www.e90post.com/forums/showth...+filter+delete

dt604 · 10-02-2012, 04:27 PM

greatly appreciated

Wrngway · 10-02-2012, 04:32 PM

Quote:

Originally Posted by dt604

greatly appreciated

I used a box cutter and then dremel/sandpaper on mine. Just make sure to get as much out as possible. Then wash the box thoroughly and leave it to dry completely. You don't want any leftover pieces making a trip through the engine.

dt604 · 10-02-2012, 05:54 PM

So its 30-45min diy tops then ?

Andrew@ActiveAutowerke · 10-03-2012, 11:39 AM

Hey guys,

We installed our exhaust and version 2 tune on a very happy customer's car today! I decided it was a perfect time to test out my new iphone 5 and do a couple videos for you guys. Enjoy

govad · 10-03-2012, 11:39 AM

This exhaust is soo worth it. I picked one up yesterday after my preorder in July and got a free install. Along with that free install, my boy Andrew from active hooked it up by upgrading my stage 1 tune to a stage 2 tune. I highly recommend this exhaust along with literally anything else you can find that active makes.

P.S. the car above is mine

upstatedoc · 10-03-2012, 02:41 PM

^^hardwire that X50 up high.

Andrew@ActiveAutowerke · 10-03-2012, 07:45 PM

Hardwire Ftw

monkey_wrench · 10-04-2012, 05:44 AM

Quote:

Originally Posted by Andrew@ActiveAutowerke

Hey guys,

We installed our exhaust and version 2 tune on a very happy customer's car today! I decided it was a perfect time to test out my new iphone 5 and do a couple videos for you guys. Enjoy

Nice! And you're doing the same on a 330i today

Andrew@ActiveAutowerke · 10-04-2012, 01:16 PM

Monkey Wrench came down today to have our exhaust installed along with our version 2 software. Much to our surprise the exhaust slipped right on to the car without any modifications at all.

It must be the 325/n51's only with the over sized exhaust piping.

upstatedoc · 10-04-2012, 02:17 PM

Quote:

Originally Posted by Andrew@ActiveAutowerke

It must be the 325/n51's only with the over sized exhaust piping.

son of a bitch

09-28-2012, 02:49 PM	#331
ZeroSix Private Drives: 2006 BMW 325i Join Date: Dec 2011 Location: California Posts: 66 iTrader: (0) Garage List 2006 BMW 325i [5.00]	This is a 2006 E90 325i 3.0L N52. Instead of $50 it was $150 for install. This is the picture of the stock muffler. Here it is with the custom pipe. Last edited by ZeroSix; 10-04-2012 at 05:10 PM.

09-28-2012, 09:41 PM	#332
GermanMuscle Once you drive a Bimmer, you always drive a Bimmer Drives: 2011 e90 Join Date: May 2012 Location: Atlanta Posts: 221 iTrader: (1)	It's 50 to cut and weld at my local shop, but of course my was a direct fit and it cost me 40. Attached Images

10-03-2012, 11:39 AM	#346
Andrew@ActiveAutowerke BimmerPost Supporting Vendor Drives: 135i N55 Fbo Meth + E85 Join Date: Dec 2011 Location: Miami Fl Posts: 2,337 iTrader: (3)	Hey guys, We installed our exhaust and version 2 tune on a very happy customer's car today! I decided it was a perfect time to test out my new iphone 5 and do a couple videos for you guys. Enjoy __________________

10-03-2012, 11:39 AM	#347
govad New Member Drives: BMW 328i MSport Package 6MT Join Date: Jul 2012 Location: Miami Beach, FL Posts: 11 iTrader: (0)	So worth it This exhaust is soo worth it. I picked one up yesterday after my preorder in July and got a free install. Along with that free install, my boy Andrew from active hooked it up by upgrading my stage 1 tune to a stage 2 tune. I highly recommend this exhaust along with literally anything else you can find that active makes. P.S. the car above is mine

10-03-2012, 02:41 PM	#348
upstatedoc Drone Expert Drives: '09 BMW 328ix Join Date: Dec 2009 Location: NY Posts: 809 iTrader: (1)	^^hardwire that X50 up high. __________________ Active Autowerke Stage 2 tune/BMW Performance Exhaust/ Countermeasure enthusiast.

09-29-2012, 12:57 PM	#333
NuBeetle Private First Class Drives: E90 LCI 323iA Join Date: Apr 2011 Location: Hong Kong Posts: 115 iTrader: (0) Garage List 2005 Mini Cooper S ... [0.00] 2011 BMW E90 LCI 323i [0.00]	Andrew, pls kindly quote me THE BEST price shipped to Hong Kong. Besides that, pls confirm if the AA exhaust suitable for my ride which is a 2011 2.5L (N52N engine) 323i. Thanks!

10-01-2012, 02:23 PM	#334
dt604 Private First Class Drives: 06 E90 325i sports pkg. Join Date: Jan 2012 Location: vancouver Posts: 175 iTrader: (0)	Interested in this exhaust set up, aside from that does a charcoal delete improves the n52 capabilities ? Cuz right now I have the k&n / air scoop but not sure if I should do a charcoal

10-02-2012, 02:02 PM	#336
dt604 Private First Class Drives: 06 E90 325i sports pkg. Join Date: Jan 2012 Location: vancouver Posts: 175 iTrader: (0)	Would it harm the engine in any way ? Correct me if I am wrong charcoal filter is there to help carbon build up ?

10-02-2012, 02:36 PM	#337
CombatNinja Defender of the Universe Drives: e91 328i, e90 328i, e90 335i Join Date: Feb 2011 Location: United States Posts: 1,038 iTrader: (0)	Wrong.

10-02-2012, 03:42 PM	#339
dt604 Private First Class Drives: 06 E90 325i sports pkg. Join Date: Jan 2012 Location: vancouver Posts: 175 iTrader: (0)	typo ment to write prevent to -__-, so basically its just something to prevent the carbon to being released in the ozone layer right ?

10-02-2012, 04:15 PM	#341
dt604 Private First Class Drives: 06 E90 325i sports pkg. Join Date: Jan 2012 Location: vancouver Posts: 175 iTrader: (0)	Yeah , what meant to type in the beginning -_- that seems to be a very falwed design, what would I use to cut out the charcoal filter then.

10-02-2012, 04:27 PM	#343
dt604 Private First Class Drives: 06 E90 325i sports pkg. Join Date: Jan 2012 Location: vancouver Posts: 175 iTrader: (0)	greatly appreciated

10-02-2012, 05:54 PM	#345
dt604 Private First Class Drives: 06 E90 325i sports pkg. Join Date: Jan 2012 Location: vancouver Posts: 175 iTrader: (0)	So its 30-45min diy tops then ?

10-03-2012, 07:45 PM	#349
Andrew@ActiveAutowerke BimmerPost Supporting Vendor Drives: 135i N55 Fbo Meth + E85 Join Date: Dec 2011 Location: Miami Fl Posts: 2,337 iTrader: (3)	Hardwire Ftw __________________

10-04-2012, 01:16 PM	#351
Andrew@ActiveAutowerke BimmerPost Supporting Vendor Drives: 135i N55 Fbo Meth + E85 Join Date: Dec 2011 Location: Miami Fl Posts: 2,337 iTrader: (3)	Monkey Wrench came down today to have our exhaust installed along with our version 2 software. Much to our surprise the exhaust slipped right on to the car without any modifications at all. It must be the 325/n51's only with the over sized exhaust piping. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search