GTB Performance | Beauty is a thing of Concavity - MORR VS8.2 - BMW 3-Series (E90 E92) Forum

Rich@GTBPerformance · 03-31-2012, 09:45 AM

sales@gtbperformance.com | www.gtbperformance.com | 973 429 2839 | Facebook

Take your BMW's Styling to the Next Level with MORR's lightweight VS8.2 Wheels

Configure and price your VS8.2's @ GTBPerformance.com

The new MonoForged VS8.2 is lighter, wider, and stronger than any of its predecessors. The new VS8.2 weighs approximately 8.87-kg (19.52-lbs) making it about 1.03-kg (2.26-lbs) lighter than the MonoForged VS8. This weight reduction was achieved by implementing several advanced manufacturing processes. These include flow-forming, which reduces barrel thickness by up to ten-percent; Vehicle Specific Profiles (VSP); and Finite Element Analysis (FEA) for Vehicle Specific Load Ratings (VSLR), and Vehicle Specific Weight Optimization (VSWO).

The geometry of the revamped VS8.2's is also responsible for significant weight reduction. Hyperanalysis of the VS8.2's geometry enabled our engineers to improve the aesthetics of the design, while shaving an additional 0.8 lbs from the first VS8.2 prototype.

MORR Competition Wheels was established in 2005 and has since managed to position itself as an industry leader and innovator in Craftsmanship, Performance, Aesthetics and distinctive innovations. MORR Competition Wheels designs and engineers its own line of ultra-light weight performance wheels for high-end automobiles. Our main product lines, MonoForged™ and SpunForged™ are not only designed to improve your vehicle's performance but to equally enhance your vehicle's appearance.

Since its introduction in the market MORR has developed wheels that are tailor-made for every application and designed one-hundred-percent based on direct customer feedback. Every wheel is handcrafted exclusively to each vehicle allowing us to engineer a wheel based on specific diameters, width, offset, back pad thickness, brake clearance, and most important load rating. This company culture helps us to provide key breakthroughs in design and engineering that result in unique ultra-light performance wheels that have since their inception become industry icons.

Configure and price your VS8.2's @ GTBPerformance.com

We are Authorized for Export : Contact us about international shipping!

Technical Stuff:

You can reach us directly by calling 973 429 2839 to place your order over the phone.

Payment:
Credit/Debit Cards: Visa, Mastercard, Discover, PayPal

Other Payments:
Money Order/Cashier’s Check & Bank Wire Transfer are also available. Please contact us to pay with either of these methods.

Financing:
We offer up to 6 months interest free financing through PayPal's pay later. Pay no interest if paid in full within 6 months! Subject to credit approval

Tax:
All NJ customers will be charged 7% NJ Sales Tax

Shipping:
Shipping via Either UPS Ground or FedEx home delivery - Alaska and Hawaii as well as International options available

Hours of Operations:
Monday - Friday from 9AM - 7PM EST
Saturday/Sunday - Closed

Installs:
Need it installed? We have partnerships with local installers all over the USA with DEEP BMW experience and excellent reputations. Contact us today about a recommended installer in your area!

Rich@GTBPerformance · 04-17-2012, 05:19 PM

Hand Brushed w/ Gloss Clear Coat Option

Hand Brushed w/ Tinted Clear Coat Option

Hand Brushed w/ Tinted Matte Clear Coat Option

Gloss Silver Powdercoat

Satin Gunmetal Powdercoat

Gloss Gunmetal Powdercoat

Satin Black Powdercoat

Gloss Black Powdercoat

poldim · 04-18-2012, 06:43 PM

Nice wheels, but I'll have to hold out until they do not cost more than my mortgage payment...

bump

Evil///M · 06-14-2012, 07:08 PM

OH my god. I must have. How much???

Rich@GTBPerformance · 07-11-2012, 02:11 PM

Quote:

Originally Posted by Evil///M

OH my god. I must have. How much???

Sent you a PM the other day. LMK if you have any questions

Bluesun · 07-11-2012, 03:38 PM

When I saw the price tags ($2800 and $3900), I thought they were for a set.

I can't believe anyone with a 3-series would spend $12,000 - $16,000 for a set of rims. Did I misunderstand? Are these product pages for sets of rims, or individual rims?

Rich@GTBPerformance · 07-11-2012, 03:41 PM

Quote:

Originally Posted by Bluesun

When I saw the price tags ($2800 and $3900), I thought they were for a set.

I can't believe anyone with a 3-series would spend $12,000 - $16,000 for a set of rims. Did I misunderstand? Are these product pages for sets of rims, or individual rims?

Bluesun

The price is for a set, yes! I can't imagine anyone spending $12000+ for a set of wheels either.

The $2800 price tag gets you a full set of 19" VS8.2's in the E92 Non M Fitment with powdercoated finish.

Bluesun · 07-11-2012, 04:02 PM

Quote:

Originally Posted by Rich@GTBPerformance

Bluesun

The price is for a set, yes! I can't imagine anyone spending $12000+ for a set of wheels either.

The $2800 price tag gets you a full set of 19" VS8.2's in the E92 Non M Fitment with powdercoated finish.

That makes much more sense

.

<--feels like an idiot

Thanks!

Rich@GTBPerformance · 07-14-2012, 11:08 AM

Quote:

Originally Posted by Bluesun

That makes much more sense

.

<--feels like an idiot

Thanks!

No problem!

jman8484 · 08-09-2012, 09:39 PM

.....nothin like some good wheel porn! makes me wish I was in the market.

Rich@GTBPerformance · 08-13-2012, 09:22 PM

Quote:

Originally Posted by jman8484

.....nothin like some good wheel porn! makes me wish I was in the market.

Agreed!

rxander · 10-13-2012, 11:19 AM

Rich is hand brushed and cleared a standard finish now since it replaces signature silver? On your site it also only says 3 types of: silver, black, titanium.

Is it extra for hand brushed cleared?

Rich@GTBPerformance · 10-13-2012, 07:47 PM

Quote:

Originally Posted by rxander

Rich is hand brushed and cleared a standard finish now since it replaces signature silver? On your site it also only says 3 types of: silver, black, titanium.

Is it extra for hand brushed cleared?

Yes, the Hand brushed is a special finish and is no longer a standard option like Signature Silver was.

There is an additional charge for this finish

ALPINE6SPD · 01-02-2013, 03:41 PM

For the money these may be the best wheels on the market right now PERIOD.

Park2670 · 01-02-2013, 04:16 PM

Quote:

Originally Posted by ALPINE6SPD

For the money these may be the best wheels on the market right now PERIOD.

Agreed.

Rich@GTBPerformance · 01-05-2013, 10:10 AM

Quote:

Originally Posted by Park2670

Agreed.

Double agreed!

Moc247 · 01-11-2013, 06:06 PM

Is signature black still for sale? If so, is it a standard finish or a special/custom? I didn't see that option on the site.

Rich@GTBPerformance · 01-13-2013, 05:38 PM

Quote:

Originally Posted by Moc247

Is signature black still for sale? If so, is it a standard finish or a special/custom? I didn't see that option on the site.

Sent you a PM!

335is_cabriolet · 02-15-2013, 12:49 AM

PM price for the VS8.2. 19x8.5 and 19 x10 and recommended offsets for flush. Shipping to Calgary, AB.

Rich@GTBPerformance · 02-18-2013, 09:18 AM

Quote:

Originally Posted by 335is_cabriolet

PM price for the VS8.2. 19x8.5 and 19 x10 and recommended offsets for flush. Shipping to Calgary, AB.

PM sent!

Rich@GTBPerformance · Today, 08:45 AM

03-31-2012, 09:45 AM	#1
Rich@GTBPerformance BimmerPost Supporting Vendor Drives: A hard bargain Join Date: Dec 2010 Location: Northern NJ Posts: 6,434 iTrader: (4)	GTB Performance \| Beauty is a thing of Concavity - MORR VS8.2 sales@gtbperformance.com \| www.gtbperformance.com \| 973 429 2839 \| Facebook Take your BMW's Styling to the Next Level with MORR's lightweight VS8.2 Wheels Configure and price your VS8.2's @ GTBPerformance.com The new MonoForged VS8.2 is lighter, wider, and stronger than any of its predecessors. The new VS8.2 weighs approximately 8.87-kg (19.52-lbs) making it about 1.03-kg (2.26-lbs) lighter than the MonoForged VS8. This weight reduction was achieved by implementing several advanced manufacturing processes. These include flow-forming, which reduces barrel thickness by up to ten-percent; Vehicle Specific Profiles (VSP); and Finite Element Analysis (FEA) for Vehicle Specific Load Ratings (VSLR), and Vehicle Specific Weight Optimization (VSWO). The geometry of the revamped VS8.2's is also responsible for significant weight reduction. Hyperanalysis of the VS8.2's geometry enabled our engineers to improve the aesthetics of the design, while shaving an additional 0.8 lbs from the first VS8.2 prototype. MORR Competition Wheels was established in 2005 and has since managed to position itself as an industry leader and innovator in Craftsmanship, Performance, Aesthetics and distinctive innovations. MORR Competition Wheels designs and engineers its own line of ultra-light weight performance wheels for high-end automobiles. Our main product lines, MonoForged™ and SpunForged™ are not only designed to improve your vehicle's performance but to equally enhance your vehicle's appearance. Since its introduction in the market MORR has developed wheels that are tailor-made for every application and designed one-hundred-percent based on direct customer feedback. Every wheel is handcrafted exclusively to each vehicle allowing us to engineer a wheel based on specific diameters, width, offset, back pad thickness, brake clearance, and most important load rating. This company culture helps us to provide key breakthroughs in design and engineering that result in unique ultra-light performance wheels that have since their inception become industry icons. Configure and price your VS8.2's @ GTBPerformance.com We are Authorized for Export : Contact us about international shipping! Technical Stuff: You can reach us directly by calling 973 429 2839 to place your order over the phone. Payment: Credit/Debit Cards: Visa, Mastercard, Discover, PayPal Other Payments: Money Order/Cashier’s Check & Bank Wire Transfer are also available. Please contact us to pay with either of these methods. Financing: We offer up to 6 months interest free financing through PayPal's pay later. Pay no interest if paid in full within 6 months! Subject to credit approval Tax: All NJ customers will be charged 7% NJ Sales Tax Shipping: Shipping via Either UPS Ground or FedEx home delivery - Alaska and Hawaii as well as International options available Hours of Operations: Monday - Friday from 9AM - 7PM EST Saturday/Sunday - Closed Installs: Need it installed? We have partnerships with local installers all over the USA with DEEP BMW experience and excellent reputations. Contact us today about a recommended installer in your area! __________________ Your Home For Premium BMW Aftermarket Parts www.gtbperformance.com \| sales@gtbperformance.com \| Facebook \| 973 429 2839 Last edited by Rich@GTBPerformance; 04-10-2013 at 02:04 PM.
	Tweet

04-17-2012, 05:19 PM	#2
Rich@GTBPerformance BimmerPost Supporting Vendor Drives: A hard bargain Join Date: Dec 2010 Location: Northern NJ Posts: 6,434 iTrader: (4)	Hand Brushed w/ Gloss Clear Coat Option Hand Brushed w/ Tinted Clear Coat Option Hand Brushed w/ Tinted Matte Clear Coat Option Gloss Silver Powdercoat Satin Gunmetal Powdercoat Gloss Gunmetal Powdercoat Satin Black Powdercoat Gloss Black Powdercoat __________________ Your Home For Premium BMW Aftermarket Parts www.gtbperformance.com \| sales@gtbperformance.com \| Facebook \| 973 429 2839 Last edited by Rich@GTBPerformance; 03-13-2013 at 10:03 AM.

04-18-2012, 06:43 PM	#3
poldim Vroom Vrrooooom Drives: 330i Join Date: Oct 2005 Location: Bay Area, CA Posts: 3,097 iTrader: (2) Garage List 2006 330i Sedan [0.00] 2003 GSX-R 600 [0.00]	Nice wheels, but I'll have to hold out until they do not cost more than my mortgage payment... bump __________________ -Dmitriy 06' BMW 330i & 03' Suzuki GSX-R600 SG \| Beige Dakota \| Poplar \|\| iDrive w/MP3 \| PP \| SP \| CWP \| PDC \| Comfort \| Shades \|\| 40% Tint \| Rogue Engineering 12MM Spacers \| Black Line Tail Lights

01-02-2013, 03:41 PM	#14
ALPINE6SPD Lieutenant General Drives: 2010 BMW 328i Sport Join Date: Dec 2005 Location: Highland Lakes NJ Posts: 10,404 iTrader: (2)	For the money these may be the best wheels on the market right now PERIOD. __________________ 2010 AW e90 328i: 6 speed, Black Leather, Dark Wood trim, ZPP, ZCW, ZVP,ZSP, Nav, Xenon BMW Performance CF Rear spolier and Gloss black grills 2008 Candy White MKV GTI 2.0T 6 Speed Manul Gone 2008 AW X3 3.0si: 6 speed Returned 2006 AW e90 330i: 6 speed Dinan Stage 1 Returned

Today, 08:45 AM	#21
Rich@GTBPerformance BimmerPost Supporting Vendor Drives: A hard bargain Join Date: Dec 2010 Location: Northern NJ Posts: 6,434 iTrader: (4)	__________________ Your Home For Premium BMW Aftermarket Parts www.gtbperformance.com \| sales@gtbperformance.com \| Facebook \| 973 429 2839

06-14-2012, 07:08 PM	#4
Evil///M Professional Hitman Drives: 335i Street. E36 M3 Track. Join Date: Feb 2011 Location: 719/856 Posts: 408 iTrader: (6) Garage List 2007 335i [4.25]	OH my god. I must have. How much???

07-11-2012, 03:38 PM	#6
Bluesun sudo su - Drives: 2007 335i 6MT Join Date: Sep 2010 Location: Ohio - CLE Posts: 26 iTrader: (0)	When I saw the price tags ($2800 and $3900), I thought they were for a set. I can't believe anyone with a 3-series would spend $12,000 - $16,000 for a set of rims. Did I misunderstand? Are these product pages for sets of rims, or individual rims?

08-09-2012, 09:39 PM	#10
jman8484 New Member Drives: 325i Join Date: Aug 2012 Location: USA Posts: 23 iTrader: (0)	.....nothin like some good wheel porn! makes me wish I was in the market.

10-13-2012, 11:19 AM	#12
rxander First Lieutenant Drives: F30 Alpine White Join Date: May 2012 Location: San Diego Posts: 319 iTrader: (0)	Rich is hand brushed and cleared a standard finish now since it replaces signature silver? On your site it also only says 3 types of: silver, black, titanium. Is it extra for hand brushed cleared?

01-11-2013, 06:06 PM	#17
Moc247 Private Drives: '11 e92 M-Sport (LBM) Join Date: Feb 2009 Location: Michigan Posts: 81 iTrader: (1)	Is signature black still for sale? If so, is it a standard finish or a special/custom? I didn't see that option on the site.

02-15-2013, 12:49 AM	#19
335is_cabriolet Enlisted Member Drives: 2011 BMW 335is Cabriolet Join Date: Sep 2011 Location: Calgary, AB Posts: 38 iTrader: (0)	PM price for the VS8.2. 19x8.5 and 19 x10 and recommended offsets for flush. Shipping to Calgary, AB.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search