Eric's HPF Single Turbo N54 Is ALIVE - VIDEO - Page 58 - BMW 3-Series (E90 E92) Forum

Jeller · 09-10-2012, 08:27 PM

Wheels look nice in that pic

Eleventeen · 09-10-2012, 09:40 PM

Quote:

Originally Posted by LuSt4Boost

You must have been locked up too...lol MtvJams returned to cable a little while ago. Videos all day everyday!!

Seriously?! Damn cryo-chamber. BTW, what are the 3 seashells for?

Goofyguy · 09-12-2012, 12:07 PM

Quote:

Originally Posted by Eleventeen

BTW, what are the 3 seashells for?

Still havent figured that one out? They gotta be some nasty shells and a calused up rear.

HPF Kirk · 10-04-2012, 04:24 PM

Updates!!!!!!

Right off the bat you will notice the twin wastegate mounts. We decided to go with this design for flawless and ease of boost control. You’ll then notice the smoother twin scroll division. This served two purposes; faster spool up and allows a plethora of turbo chargers to be used with our kit. As mentioned before, we’ll be using a dual ball bearing 6466 divided turbo with our initial kit. We will definitely be testing other turbos as we develop more stages for the kit.

The runners are also nearly equal, that is always beneficial. With the manifold now in our hands, we are just in need of closing up lose ended projects before we can fully dive right into finishing the 335i kit. As always, we’ll be updating you as progress happens. Also we do plan on selling some components separately for those that would like to choose their own turbo and tune on their own.

CaptainInsano · 10-04-2012, 04:30 PM

Quote:

Originally Posted by HPF Kirk

Updates!!!!!!

Right off the bat you will notice the twin wastegate mounts. We decided to go with this design for flawless and ease of boost control. You’ll then notice the smoother twin scroll division. This served two purposes; faster spool up and allows a plethora of turbo chargers to be used with our kit. As mentioned before, we’ll be using a dual ball bearing 6466 divided turbo with our initial kit. We will definitely be testing other turbos as we develop more stages for the kit.

The runners are also nearly equal, that is always beneficial. With the manifold now in our hands, we are just in need of closing up lose ended projects before we can fully dive right into finishing the 335i kit. As always, we’ll be updating you as progress happens. Also we do plan on selling some components separately for those that would like to choose their own turbo and tune on their own.

More boost, excellent. Looking good guys, blow that sucker up already

LuSt4Boost · 10-04-2012, 04:32 PM

vereak82 · 10-04-2012, 11:57 PM

Oh my that's a thing of beauty

spectacula · 10-05-2012, 12:08 AM

beautiful

D_Smiderreen · 10-05-2012, 03:22 AM

I like it

Dmacc · 10-05-2012, 03:27 AM

Nice!

dlbrooks18 · 10-05-2012, 12:41 PM

Great work HPF

Fundahl · 10-05-2012, 02:02 PM

Much better now!

BoostedE90 · 10-05-2012, 02:47 PM

Major improvement over the first design. Can't wait to see this thing all put together.

HPF 335i #1 · 10-05-2012, 02:48 PM

Yeah this thing is gunna be sick... To Bad im deployed again... FML

daemonicus · 10-05-2012, 03:49 PM

Quote:

Originally Posted by HPF 335i #1

Yeah this thing is gunna be sick... To Bad im deployed again... FML

thank you for your service. i'm sure since they've only had 4 years to develop your car, by the time you get back from this tour, they should have it back to you within 2-3 years. you must be thrilled.

marcvtec · 10-05-2012, 05:24 PM

Wow HPF come on the bandwagon is passing
By the time this is ready to got my GTR will be old

Eleventeen · 10-05-2012, 11:22 PM

Quote:

Originally Posted by marcvtec

Wow HPF come on the bandwagon is passing
By the time this is ready to got my GTR will be old

What? LOL

Beemw335 · 10-05-2012, 11:34 PM

Poor Eric, these guys have had his car so damn long!
You would think a company like HPF would have their own project car.
Ps: thank you for your service Eric, even though I am not American, I highly respect you for what you are doing, hopefully your car is ready soon!

HPF 335i #1 · 10-06-2012, 12:06 AM

Quote:

Originally Posted by Beemw335

Poor Eric, these guys have had his car so damn long!
You would think a company like HPF would have their own project car.
Ps: thank you for your service Eric, even though I am not American, I highly respect you for what you are doing, hopefully your car is ready soon!

HPF is the Shit man, the guys there are great and they have done a lot for me over the years. I understand the kit is not done yet, this suck. But, there is a lot you don't know about this build. Some/a lot of the delay is my fault. I had a lot of repairs that needed to be made before they could get started and some of these vehicle issues were discovered during the build process which again set HPF back.

The fact that they never blamed me yet took the abuse and responsibility for failure from the forums means a lot to me.

Other than the Mani set backs, this long process is my fault. don't blame HPF, lets move forward.

Side note, I might be going Wide body. Has anyone ever herd of lance@sscamerica.com?

HPF Kirk · 10-10-2012, 02:12 PM

Quote:

Originally Posted by HPF 335i #1

HPF is the Shit man, the guys there are great and they have done a lot for me over the years. I understand the kit is not done yet, this suck. But, there is a lot you don't know about this build. Some/a lot of the delay is my fault. I had a lot of repairs that needed to be made before they could get started and some of these vehicle issues were discovered during the build process which again set HPF back.

The fact that they never blamed me yet took the abuse and responsibility for failure from the forums means a lot to me.

Other than the Mani set backs, this long process is my fault. don't blame HPF, lets move forward.

Side note, I might be going Wide body. Has anyone ever herd of lance@sscamerica.com?

Eric I might have something really cool to send your way...

Email me or give us a call when you get a chance.

07 4.0 · 10-10-2012, 06:57 PM

Sorry if I missed it, are there any numbers yet?

turb0mike · 10-10-2012, 07:33 PM

Quote:

Originally Posted by 07 4.0

Sorry if I missed it, are there any numbers yet?

LOL, this thread is like a Vice Presidential debate.

10-04-2012, 04:32 PM	#1260
LuSt4Boost Second Lieutenant Drives: BMW 335i Join Date: Dec 2008 Location: MD Posts: 285 iTrader: (2)	__________________ N54\|Twin Tebow power! + JB4

10-04-2012, 11:57 PM	#1261
vereak82 Second Lieutenant Drives: 6-spd e92 335i Join Date: May 2011 Location: michigan Posts: 279 iTrader: (0)	Oh my that's a thing of beauty __________________ Jb4 G5//CM-FX400//FBO//Meth// 12.06@118 6-speed manual

10-05-2012, 03:27 AM	#1264
Dmacc Lieutenant Colonel Drives: 2010 135i Join Date: Mar 2010 Location: Nor Cal Posts: 1,837 iTrader: (1)	Nice! __________________ thanks to MGallop

10-05-2012, 12:41 PM	#1265
dlbrooks18 Brigadier General Drives: e90 335i Join Date: Nov 2008 Location: Los Angeles Posts: 3,196 iTrader: (2)	Great work HPF __________________ 2008 E90 335

10-05-2012, 02:48 PM	#1268
HPF 335i #1 Captain Drives: 2008 E92 335i 6AT Join Date: Sep 2009 Location: Ft. Riley Kansas Posts: 762 iTrader: (0)	Yeah this thing is gunna be sick... To Bad im deployed again... FML __________________ HPF Twin Scroll Stage 1 (Vishnu Tuned), FMIC, OCC, Exhaust, KW V1, M3 Front & Rear Roll Bars, M3 Control Arms, Rear Toe Arms, M3 Sub Bushings, WT LSD, VMR 710s, Stop Tech Brakes, AEM Boost Pods, CF Boot Lid, Vented CF Hood, M-Tech Front, Aluminum Pedals, LED Shifter, Mat Black front Grill; Lots of extra work...

09-10-2012, 08:27 PM	#1255
Jeller Lieutenant Drives: 2007 335i E90 ZSP Join Date: Oct 2008 Location: Buffalo NY Posts: 464 iTrader: (4)	Wheels look nice in that pic

10-04-2012, 04:24 PM	#1258
HPF Kirk Drives: EKCivic Join Date: Jun 2011 Location: Portland, OR Posts: 77 iTrader: (0)	Updates!!!!!! Right off the bat you will notice the twin wastegate mounts. We decided to go with this design for flawless and ease of boost control. You’ll then notice the smoother twin scroll division. This served two purposes; faster spool up and allows a plethora of turbo chargers to be used with our kit. As mentioned before, we’ll be using a dual ball bearing 6466 divided turbo with our initial kit. We will definitely be testing other turbos as we develop more stages for the kit. The runners are also nearly equal, that is always beneficial. With the manifold now in our hands, we are just in need of closing up lose ended projects before we can fully dive right into finishing the 335i kit. As always, we’ll be updating you as progress happens. Also we do plan on selling some components separately for those that would like to choose their own turbo and tune on their own.

10-05-2012, 12:08 AM	#1262
spectacula Second Lieutenant Drives: e92 335i Join Date: Nov 2010 Location: long island Posts: 200 iTrader: (4)	beautiful

10-05-2012, 03:22 AM	#1263
D_Smiderreen Banned Drives: Please delete my account Join Date: Nov 2009 Location: please delete my account Posts: 157 iTrader: (1)	I like it

10-05-2012, 02:02 PM	#1266
Fundahl Captain Drives: VO 1M, 300zx TT Join Date: Mar 2011 Location: Corpus Christi, Texas Posts: 705 iTrader: (0)	Much better now!

10-05-2012, 02:47 PM	#1267
BoostedE90 Major Drives: e90 335i 6MT Join Date: Nov 2007 Location: Tampa/Gainesville, FL Posts: 1,447 iTrader: (5)	Major improvement over the first design. Can't wait to see this thing all put together.

10-05-2012, 05:24 PM	#1270
marcvtec Lieutenant Colonel Drives: 335i Join Date: Oct 2006 Location: toronto Posts: 1,596 iTrader: (0)	Wow HPF come on the bandwagon is passing By the time this is ready to got my GTR will be old __________________ COBB Powered, Spec2+, DCI, Forge DV's, AR catless DP's, AA FMIC, 19' BBS LM's wrapped in PSS, Zimmerman cross drilled rotors, hawk carbon pads, M3 Spoiler, AC roof Spoiler, Aero Lip, Vorsteiner Diffuser, m3 sides, Tinted, And One Happy BMW Driver.

10-05-2012, 11:34 PM	#1272
Beemw335 Lieutenant Colonel Drives: 335i Join Date: Mar 2011 Location: My car is my home Posts: 1,981 iTrader: (2)	Poor Eric, these guys have had his car so damn long! You would think a company like HPF would have their own project car. Ps: thank you for your service Eric, even though I am not American, I highly respect you for what you are doing, hopefully your car is ready soon!

10-10-2012, 06:57 PM	#1275
07 4.0 New Member Drives: 2007 Mustang Join Date: Dec 2011 Location: ATX Posts: 10 iTrader: (0)	Sorry if I missed it, are there any numbers yet? __________________ JakesDetailing.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search