E90Post
 


TireRack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > BMW Coding > Figuring out how to add BMW Apps to 2011 E9X



Reply
 
Thread Tools Search this Thread
      05-26-2012, 06:45 PM   #45
melloww22
Captain
melloww22's Avatar
10
Rep
617
Posts

 
Drives: 2011 335i E90
Join Date: Apr 2011
Location: San Diego

iTrader: (1)

Quote:
Originally Posted by srwatters View Post
I just did the above procedure on my 2011 E90 (7/11 build date) and I have the web radio, Facebook, Twitter, & Calendar functions working through the standard white iPhone cable (no snap-in installed). On the ConnectedDrive screen there are two sections under the BMW Apps heading, The section under "snap-in apps" is blank. I'm assuming that is where I would see the video enabled applications if the snap-in adapter is installed.

I might consider adding the snap-in adapter at some point, but for the moment, I'm happy to have the basic functions working.

Good luck!
I have coded $6NR with FA_WRITE to (CAS, NFRM). my CAR is a 04/2011 build with $6NF from factory...

How do I code the car to update the modules based on the VO. I know its using SG_CODIEREN to (CIC, MEDIA) but tipically i read the ECU modify, read using basic functions, change job type to sg_codieren and then execute the job..

thank you in advance
Appreciate 0
      05-27-2012, 07:16 PM   #46
melloww22
Captain
melloww22's Avatar
10
Rep
617
Posts

 
Drives: 2011 335i E90
Join Date: Apr 2011
Location: San Diego

iTrader: (1)

Exclamation

I updated my CIC and MEDIA based on my VO, below includes my deltas between my original FSW_PSW and current FSW_PSW file...

Please note the new changes $6NR creates

Whats weird is that I had ConnectedDrive under my menu, now it shows as BMW Assist... how do I get the connected drive option back on...

Yes my connected_drive setting is set to aktiv

How do I find out what ISTA level I have?

I suspect I need a FSC... Running CIC.C1A
Attached Files
File Type: doc FSW_PSW_DELTAS.doc (180.0 KB, 373 views)

Last edited by melloww22; 05-27-2012 at 07:25 PM.
Appreciate 0
      06-04-2012, 05:48 PM   #47
cjk26md
New Member
0
Rep
11
Posts

 
Drives: 2012 X35i cjk26md@aol.com
Join Date: May 2012
Location: Dallas, TX

iTrader: (0)

Hello.. I have a 2012 X5, build date 11/11. I have nav, 6FL, combox, etc.. As I'm sure you already could figure out. When I received my vehicle I was a little upset as it was supposed to have BMW APPS, it did not. I have tried everything to get this enabled. I have CIC.19 version, and we have added $6NR to FA/VO, and sg_codieren to CIC AND MEDIA. We did have the same issue as above, connecteddrive turns into BMW assist. But still- no BMW Apps.. If anyone has any helpful info, I would greatly appreciate it. I have exhausted all my efforts searching and searching, this is kinda my last hope. Thank you all...
Appreciate 0
      06-04-2012, 06:04 PM   #48
cjk26md
New Member
0
Rep
11
Posts

 
Drives: 2012 X35i cjk26md@aol.com
Join Date: May 2012
Location: Dallas, TX

iTrader: (0)

Any updates for you?

Quote:
Originally Posted by melloww22 View Post
I updated my CIC and MEDIA based on my VO, below includes my deltas between my original FSW_PSW and current FSW_PSW file...

Please note the new changes $6NR creates

Whats weird is that I had ConnectedDrive under my menu, now it shows as BMW Assist... how do I get the connected drive option back on...

Yes my connected_drive setting is set to aktiv

How do I find out what ISTA level I have?

I suspect I need a FSC... Running CIC.C1A

Have you had any updates with this?
Appreciate 0
      06-08-2012, 12:31 PM   #49
tmaung
CCA Member#: 439255
tmaung's Avatar
United_States
8
Rep
492
Posts

 
Drives: E36 M3, F80 M3
Join Date: Jun 2009
Location: Northern VA

iTrader: (8)

any coders in the northern va area that wants to help me try this out?
__________________
Current: 1997 E36 M3, 2015 F80 M3
Past: 2011 E92 M3, 2011 E92 335is, 2008 E90 M3, 2007 E92 335i, 1995 E36 M3
Appreciate 0
      06-09-2012, 07:50 PM   #50
melloww22
Captain
melloww22's Avatar
10
Rep
617
Posts

 
Drives: 2011 335i E90
Join Date: Apr 2011
Location: San Diego

iTrader: (1)

Quote:
Originally Posted by cjk26md View Post
Have you had any updates with this?

no luck, however i did find out that the dealer needs to run the VO update with the FSC, even though my car has all the requirements but the CIC.C1A is too new to work without the dealers involvement...
Appreciate 0
      06-09-2012, 08:08 PM   #51
cjk26md
New Member
0
Rep
11
Posts

 
Drives: 2012 X35i cjk26md@aol.com
Join Date: May 2012
Location: Dallas, TX

iTrader: (0)

See where I am stuck is, if I have an FSC where do I enter it..I have everything figured out EXCEPT this..
Appreciate 0
      10-11-2012, 07:18 PM   #52
melloww22
Captain
melloww22's Avatar
10
Rep
617
Posts

 
Drives: 2011 335i E90
Join Date: Apr 2011
Location: San Diego

iTrader: (1)

Quote:
Originally Posted by cjk26md
See where I am stuck is, if I have an FSC where do I enter it..I have everything figured out EXCEPT this..
I just got an FSC from a generator I am in the same boat
Appreciate 0
      10-16-2012, 06:46 PM   #53
rismo
Captain
15
Rep
841
Posts

 
Drives: BMW E92 335
Join Date: Jul 2008
Location: Europe

iTrader: (0)

OK, first do not update to the latest firmware levels. You will then need an expensive FSC code to unlock the apps.

But, you need to have your VO and firmware set to date and firmware level when the apps were introduced.

You need combo and CIC.

Then add 6nr to your VO. Recode the car.

No guarantee but this should be more or less the protocol.
__________________
BMW 335 E92 08 - Full options - RIP
BMW 335 E92 09 - Full options - DKG - Procede Rev 3 - Vishnu Meth and Chargepipe - Forge Diverter Valves - Vishnu Flex Fuel Kit- AR Catless DP - Afe Intake - Helix IC - Ar Oil Cooler - PPK Water Cooler - M3 Suspension - JRZ RS1 Shocks - Eibach Pro Springs - Drexler LSD - BMW IS Exhaust - EBC Yellow Brake Pads - Stainless Steel Brake Lines - M101 Wheels - Michelin PSS - M-Tech Body - M-Strutbar
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:08 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST