Autocon parking lot 2012 #TeamStretchNpoke - Page 7 - BMW 3-Series (E90 E92) Forum

#Tee · 10-17-2012, 04:46 PM

more goodies! waiting on rear springs now

VMRWheels · 10-17-2012, 05:25 PM

Yay for camber arms.

#Tee · 10-27-2012, 07:35 AM

My rear springs are in

7in/2.5/24.8kg vs 6in/2.5/18kg. I can finally rest now!

alexukie · 10-27-2012, 01:42 PM

Felipefacsom · 10-29-2012, 09:18 AM

holy crappppppppppppppppppp ! amanzingggg ride ... off set the weels ?..

#Tee · 10-29-2012, 09:25 PM

Quote:

Originally Posted by Felipefacsom

holy crappppppppppppppppppp ! amanzingggg ride ... off set the weels ?..

10.5 +15
12.5+27

I maxed out the camber but couldnt get a pix so i had to video it for you guys can see. During this process the rim was rubbing on the frame so i had to back out the camber some

. It was sitting all hot til i couldnt handle the rim rubbing on the frame anymore. I can actually see the wheel toeing in as i was twisting the camber arm in as it cambers...sighs more tweaks to do.

Verbiage · 10-29-2012, 09:53 PM

So that's about <1mm clearance, Tee?

Mahhvinn · 10-29-2012, 10:15 PM

low is a lifestyle!

#Tee · 10-29-2012, 11:37 PM

Quote:

Originally Posted by Verbiage

So that's about <1mm clearance, Tee?

maybe even less, i was able to glide a piece of the backing paper used on decals and felt lil drag. The paint scratch you see on the koni was actually from the barrel repetitively banging on the shock from mounting the wheel on all these years.
The barrel and scratch dont line up once its mounted so thats proof that they dont touch during full compression.

Quote:

Originally Posted by M_Truong

low is a lifestyle!

sadly im not even that low lol

the infamous... · 10-30-2012, 10:06 AM

good shits G! maybe ur crowd wont blast u anymo 4 "bein too high"

#Tee · 10-30-2012, 09:41 PM

Quote:

Originally Posted by the infamous...

good shits G! maybe ur crowd wont blast u anymo 4 "bein too high"

eheh thanks man!

Heres some more updates, just installed the koni race inserts (rebound adjustment) into the fk highsport coil body. It was basically a direct fit, the koni itself was about 1 inch shorter so i chopped off a piece of the old insert for a spacer. I paired them with 1088lbs ksport springs and so far im lovin the ride

Onto the pix..

project335i · 10-30-2012, 09:52 PM

Damn you are putting in work tee. Good job clearance is Looking good from what I can see. How does it feel? I've been looking at those camber arms how are they. How much did you end up putting in the rear

SneakyDeeky · 10-30-2012, 10:01 PM

You guys are so legit in your stance.

SoCal BimMn' · 10-30-2012, 10:26 PM

Dayuum good stuff T bet it's rides like a champ better then it did anyways lol

Mahhvinn · 10-31-2012, 02:13 AM

look at that clearance. such a boss! haha. how's the initial opinion on the new setup? Also, how are the megan parts?

#Tee · 10-31-2012, 02:46 AM

Quote:

Originally Posted by project335i

Damn you are putting in work tee. Good job clearance is Looking good from what I can see. How does it feel? I've been looking at those camber arms how are they. How much did you end up putting in the rear

Thanks man, its very rail like right now. I can feel every bump/leaf on the road lol. The rears are on 1388 lbs, the megans are great so far...the install was very easy but it just screws up your toe badly. And like ive said before this is why ppl think camber kills your tires.

Quote:

Originally Posted by SneakyDeeky

You guys are so legit in your stance.

This place needs some diversity like every other car forum

Quote:

Originally Posted by SoCal BimMn'

Dayuum good stuff T bet it's rides like a champ better then it did anyways lol

Thanks man, alot better than before cause my shocks were blown ahha.

Quote:

Originally Posted by M_Truong

look at that clearance. such a boss! haha. how's the initial opinion on the new setup? Also, how are the megan parts?

Right now i set the front to full stiff/boner hard erection status, i drove it on the freeway and i was like....hmm ok lil toooo hard so i just 2 revolutions softer and go from there. The steering response was bad ass! great feed back. The megan arms also came with a harder bushing so im sure it all played well together. Im goona max and camber and bring my toe out on friday before i get an alignment, I dont want those techs messing with my camber! lol

But for my next car ill know exactly what to do as i learned alot from this platform.

iczz · 10-31-2012, 03:36 AM

looks amazing

Slavo335i · 10-31-2012, 10:50 AM

list your mods and wheel specs exactly how i want my car to look!!! looks amazing BTW

project335i · 10-31-2012, 11:01 AM

Nice bro I guess I will be ordering them soon, let me know how they are after a little more use

dragazn · 10-31-2012, 01:45 PM

This has becomes Tee build thread hihihi, I <3 it!!!!!

91Octane · 11-23-2012, 11:11 PM

Bump...

because the most drooling thread must go on...

the infamous... · 11-26-2012, 09:25 PM

*cough* cotm *cough*

10-17-2012, 04:46 PM	#133
#Tee attention whore Drives: yes Join Date: Oct 2011 Location: Socal Posts: 3,069 iTrader: (0)	more goodies! waiting on rear springs now Attached Images __________________ #teamstretchNpoke

10-17-2012, 05:25 PM	#134
VMRWheels BimmerPost Supporting Vendor Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA Posts: 9,905 iTrader: (4) Garage List 2008 5 Series [3.30]	Yay for camber arms. __________________ NEW WHEEL MODEL: V721 \| LIVE INVENTORY: V705 V703 V710 \| V710 PICTURE THREAD p. 714-442-7916 extension 103 \| e. kevin.a@velocitymotoring.com \| f. facebook.com/vmrwheels f. flickr.com/vmrwheels

10-27-2012, 07:35 AM	#135
#Tee attention whore Drives: yes Join Date: Oct 2011 Location: Socal Posts: 3,069 iTrader: (0)	My rear springs are in 7in/2.5/24.8kg vs 6in/2.5/18kg. I can finally rest now! Attached Images __________________ #teamstretchNpoke

10-29-2012, 09:53 PM	#139
Verbiage I swag on 'em. Drives: N54B30 Join Date: Jan 2010 Location: MD Posts: 8,046 iTrader: (4)	So that's about <1mm clearance, Tee? __________________ Peep my music shit here

10-29-2012, 10:15 PM	#140
Mahhvinn EUROPROJEKTZ Drives: backwards Join Date: Dec 2008 Location: San Jose, CA (Bay Area) Posts: 7,688 iTrader: (15) Garage List 2008 E90 335i [3.20]	low is a lifestyle! __________________ LTMW\|SPEEDELEMENT\|EUROPROJEKTZ #TeamStretchNPoke

10-27-2012, 01:42 PM	#136
alexukie Second Lieutenant Drives: 335i coupe Join Date: Sep 2012 Location: rochester ny Posts: 216 iTrader: (0)

10-29-2012, 09:18 AM	#137
Felipefacsom Second Lieutenant Drives: e92 335i Join Date: Sep 2010 Location: Somerville Posts: 213 iTrader: (1)	holy crappppppppppppppppppp ! amanzingggg ride ... off set the weels ?..

10-30-2012, 10:06 AM	#142
the infamous... Lieutenant General Drives: like I'M BOUT THAT LIFE Join Date: Jul 2008 Location: PARADISE aka DAWNTOWN Posts: 16,889 iTrader: (0)	good shits G! maybe ur crowd wont blast u anymo 4 "bein too high" __________________ "simple is clean" -The ///ModFather [ iND ] - [ eAs ] - [ ACM ] - [ LTMW ] - [ AA ]

10-30-2012, 09:52 PM	#144
project335i Banned Drives: Wide Load Join Date: Mar 2011 Location: SAUGA Posts: 4,514 iTrader: (6)	Damn you are putting in work tee. Good job clearance is Looking good from what I can see. How does it feel? I've been looking at those camber arms how are they. How much did you end up putting in the rear

10-30-2012, 10:01 PM	#145
SneakyDeeky Major Drives: '07 E90 335i 6MT Join Date: Feb 2011 Location: Redondo Beach, CA Posts: 1,076 iTrader: (3) Garage List 2007 BMW 335i E90 [4.80]	You guys are so legit in your stance. __________________ 6MT/Cobb St2+/KW V1/Spec2+ Clutch/ER Dual Oil Coolers/ETS FMIC/ER Chargepipe/Synapse BOV/RPI Scoops/BMS DCI/AR DPs/Magnaflow/BSH OCC/CDV Mod/35% tint/ Drilled & Slotted Rotors/M3 Front-Rear-Sides-Control Arms & Air Ducts/Advan RS/Michelin PSS/SonicTuning CSL Trunk/LS3 AEs/6000K Xenons/P3 Vent Boost Gauge/Engine #2?

10-30-2012, 10:26 PM	#146
SoCal BimMn' Major Drives: Montego Blue e92 Join Date: Jul 2010 Location: SoSoCal Posts: 1,386 iTrader: (29)	Dayuum good stuff T bet it's rides like a champ better then it did anyways lol __________________

10-31-2012, 02:13 AM	#147
Mahhvinn EUROPROJEKTZ Drives: backwards Join Date: Dec 2008 Location: San Jose, CA (Bay Area) Posts: 7,688 iTrader: (15) Garage List 2008 E90 335i [3.20]	look at that clearance. such a boss! haha. how's the initial opinion on the new setup? Also, how are the megan parts? __________________ LTMW\|SPEEDELEMENT\|EUROPROJEKTZ #TeamStretchNPoke

10-31-2012, 03:36 AM	#149
iczz Lieutenant Colonel Drives: E90 325i Join Date: Jan 2006 Location: SF Bay Area Posts: 1,752 iTrader: (23)	looks amazing

10-31-2012, 10:50 AM	#150
Slavo335i Second Lieutenant Drives: Bmw 335i Couple AW/CR Join Date: Sep 2012 Location: Chicago Posts: 229 iTrader: (0)	list your mods and wheel specs exactly how i want my car to look!!! looks amazing BTW

10-31-2012, 11:01 AM	#151
project335i Banned Drives: Wide Load Join Date: Mar 2011 Location: SAUGA Posts: 4,514 iTrader: (6)	Nice bro I guess I will be ordering them soon, let me know how they are after a little more use

10-31-2012, 01:45 PM	#152
dragazn Captain Drives: i Join Date: Apr 2008 Location: dfw Posts: 911 iTrader: (1) Garage List 2008 BMW 335i [2.88]	This has becomes Tee build thread hihihi, I <3 it!!!!!

11-23-2012, 11:11 PM	#153
91Octane Captain Drives: Fulltime Haters Pisser Join Date: Aug 2011 Location: You'll love me long time.., Posts: 828 iTrader: (0)	Bump... because the most drooling thread must go on...

11-26-2012, 09:25 PM	#154
the infamous... Lieutenant General Drives: like I'M BOUT THAT LIFE Join Date: Jul 2008 Location: PARADISE aka DAWNTOWN Posts: 16,889 iTrader: (0)	cough cotm cough __________________ "simple is clean" -The ///ModFather [ iND ] - [ eAs ] - [ ACM ] - [ LTMW ] - [ AA ]

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search