[neilvosko]

BIMMERPOST / Classifieds

Asking Price:
None

Item Interest

Selling custom brake ducts, made using stock brake shields, used on 2 track days.
3" coupler to 2.25" silicone to reinforced 2.25" ducts. went to 2.25 do avoid any contact with wheel on full lock, 2.5" will work too but i went for 2.25 for extra space, just in case. great for track days. the tubing is stronger than the orange ones. looking for 100 shipped..

[rheemix]

Originally Posted by neilvosko

Selling custom brake ducts, made using stock brake shields, used on 2 track days.
3" coupler to 2.25" silicone to reinforced 2.25" ducts. went to 2.25 do avoid any contact with wheel on full lock, 2.5" will work too but i went for 2.25 for extra space, just in case. great for track days. the tubing is stronger than the orange ones. looking for 100 shipped..

Do you have a picture with this installed?

[neilvosko]

no, sorry, i have one with 3" tubing on threads somewhere.

[shaginwagon13]

PM Sent

[neilvosko]

bump.
you can secure with zip ties to brackets or plastic shrouds on each side of intercooler, i cut all the plastic out to get more air and it worked out perfect.

[neilvosko]

zip tie to control arms on the wheel side.

i used to have the flanges on the front but did not find them useful.

[neilvosko]

okay, here is the pics with old 3" ducts.

http://www.e90post.com/forums/showthread.php?t=700972

the 3" is too wide at the wheel well, so 2.25 is just perfect and the tubing i have is reinforced now.

[neilvosko]

sold