E90Post
 


MINHS Auto Care Center
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > valve cover gasket & oil filter housing gasket



Reply
 
Thread Tools Search this Thread
      11-10-2012, 04:33 PM   #1
colt9987
Lieutenant
11
Rep
430
Posts

 
Drives: 135i
Join Date: Sep 2009
Location: dallas

iTrader: (2)

valve cover gasket & oil filter housing gasket

The dealer says that I need to replace these gaskets which are leaking. They want 1800 total to do the job. Can anyone tell me the exact part numbers I will need so I can go ahead and order them and get them done somewhere else?

2007 335i e90

I believe I found the correct parts on getbmwparts.com, but the prices I found them on there for seem quite different than the dealer quoted price.

valve cover gasket $33.34 (dealer quoted $67)

oil filter housing gasket $12.08 (dealer quoted $55)

Last edited by colt9987; 11-10-2012 at 04:42 PM.
Appreciate 0
      11-10-2012, 04:36 PM   #2
ErvGotti
Major
14
Rep
1,168
Posts

 
Drives: 2008 135i 6MT
Join Date: Jul 2010
Location: Bury St Edmunds UK

iTrader: (5)

Garage List
2008 135i  [3.00]
http://www.realoem.com/bmw/

Best and probably the most reliable source for oem part numbers.
Appreciate 0
      11-10-2012, 07:22 PM   #3
shaginwagon13
Charted Accountant
shaginwagon13's Avatar
Canada
10
Rep
910
Posts

 
Drives: BMW 335i Coupe
Join Date: Apr 2012
Location: Toronto

iTrader: (4)

Tagging along.... I need to replace mine as well.
Appreciate 0
      11-10-2012, 07:52 PM   #4
JamesM3M5
Some dude
United_States
24
Rep
1,760
Posts

 
Drives: E28 M5, E92 335i
Join Date: Sep 2011
Location: Northern VA

iTrader: (0)

Dealer is a ripoff. Find a local shop that sells at least near retail price and is familiar with the N54. They will need the proper tools to replace the injector seals, since the injectors must be pulled to remove the cover.

You also have to drain some of the coolant to replace the filter housing gaskets. Also a good idea to change the oil, too.
__________________
RRT Racing
E92 335i/6MT Dinan Stage 3: intercooler, oil cooler, intake, flash, exhaust, LW dual-mass flywheel.
Vishnu PWM methanol custom trunk mount, Diffsonline 3-clutch Salisbury custom diff, Ohlins Road and Track coilovers, Vorshlag camber plates, much more...
E28 M5 w/ buncha stuff, R171 SLK350
Appreciate 0
      11-10-2012, 08:46 PM   #5
jmb85
Second Lieutenant
jmb85's Avatar
United_States
2
Rep
215
Posts

 
Drives: 335i Coupe
Join Date: Sep 2012
Location: Jax NC

iTrader: (4)

Same problem here, i have external warranty though. I will be taking her on Monday, I'll post updates as far as how Much they will rip off they ext. Company. $1800 seems alot...
Appreciate 0
      11-10-2012, 09:12 PM   #6
Ilma
Colonel
29
Rep
2,576
Posts

 
Drives: BMW
Join Date: Nov 2008
Location: hometown

iTrader: (0)

Quote:
Originally Posted by JamesM3M5 View Post
Dealer is a ripoff. Find a local shop that sells at least near retail price and is familiar with the N54. They will need the proper tools to replace the injector seals, since the injectors must be pulled to remove the cover.
James.....

Do you know whether the injector seals can be replaced and then press the tip back into the metal cap for storage to replace the injector at another time in the future?

I woud like to pull some of my injectors for inspection, but don't have the tool to replace the seals......thinking someone with the tool (dealer?) may be able to install new seals and then cap it off for me to pick up and reinstall later?
__________________
Sticky is an idiot
Appreciate 0
      11-10-2012, 09:35 PM   #7
Rotorocious
Major
Rotorocious's Avatar
32
Rep
1,461
Posts

 
Drives: 335i
Join Date: May 2010
Location: Florida

iTrader: (3)

You should get new bolts for the valve cover job, the bolts cost me over $100 i think
Appreciate 0
      11-10-2012, 10:45 PM   #8
JamesM3M5
Some dude
United_States
24
Rep
1,760
Posts

 
Drives: E28 M5, E92 335i
Join Date: Sep 2011
Location: Northern VA

iTrader: (0)

Yes the metal caps taken off new injectors can be used to hold the seals during storage.

New bolts for the valve cover - why? They're steel, not stretched when torqued.
__________________
RRT Racing
E92 335i/6MT Dinan Stage 3: intercooler, oil cooler, intake, flash, exhaust, LW dual-mass flywheel.
Vishnu PWM methanol custom trunk mount, Diffsonline 3-clutch Salisbury custom diff, Ohlins Road and Track coilovers, Vorshlag camber plates, much more...
E28 M5 w/ buncha stuff, R171 SLK350
Appreciate 0
      11-10-2012, 11:35 PM   #9
Dave W.
Lieutenant
4
Rep
497
Posts

 
Drives: Porsche 951, 1992 Eagle Talon
Join Date: Apr 2012
Location: SF Bay Area

iTrader: (0)

It's possible to remove the valvecover without removing the injectors. You'll need a very deep 10mm socket for 3 of the 'grounding' bolts.

OFH gasket is easy, although the intake mani needs to be loosened/removed so you can reach the 3rd bolt holding the OFH. Maybe look into new intake mani gaskets while you're in there.
Appreciate 0
      11-11-2012, 12:31 AM   #10
335xi Kevo
Lieutenant
335xi Kevo's Avatar
7
Rep
502
Posts

 
Drives: 2008 335xi
Join Date: Jan 2012
Location: CT

iTrader: (3)

For the DIY guys careful on the fuel lines, BMW left mine loose and created a micro leak. Had a pool of gas on the head when I brought it back from this service.
__________________
08' 335xi 6MT
Space Metallic Grey
Premium, Nav, Cold weather, Sport
Procede 2.5, DCI, Forge DV, PWM, Scoops, KW V1, ETS 5" FMIC, VRSF Downpipes, M3 Skirts
Appreciate 0
      11-11-2012, 12:56 AM   #11
ign335i
Second Lieutenant
3
Rep
287
Posts

 
Drives: 335i e92
Join Date: Nov 2012
Location: CA

iTrader: (3)

Out of curiosity why would one need to replace these gaskets? What causes them, to leak?
Appreciate 0
      11-11-2012, 01:17 AM   #12
Dave W.
Lieutenant
4
Rep
497
Posts

 
Drives: Porsche 951, 1992 Eagle Talon
Join Date: Apr 2012
Location: SF Bay Area

iTrader: (0)

Quote:
Originally Posted by ign335i View Post
Out of curiosity why would one need to replace these gaskets? What causes them, to leak?
The valvecover gasket also seals the small ports that lead to the PCV system, so if they start to leak from running higher boost on an old gasket you'll get oil in the intake.

Also, it's not a good idea to re-use old gaskets when removing/replacing a part.
Appreciate 0
      11-11-2012, 01:39 PM   #13
colt9987
Lieutenant
11
Rep
430
Posts

 
Drives: 135i
Join Date: Sep 2009
Location: dallas

iTrader: (2)

im spitting out white smoke due to these gaskets leaking evidently...any insight on the part numbers so I can ensure I am ordering the right ones?
Appreciate 0
      11-11-2012, 06:42 PM   #14
Kenyale
Registered
0
Rep
2
Posts

 
Drives: BMW 330i
Join Date: Nov 2012
Location: Indpls

iTrader: (0)

Is this a coincidence?

I recently replaced my valve cover gasket on my 2006 330i with the N82 engine. It wasn't easy but I got it done and the problem was solved. Car ran fine after putting everything back together.

Yesterday, I replaced the oil filter housing gasket. The job was fairly easy except I had to partially remove the intake manifold to get to that bolt behind it. Really wasn't that big of a deal but after I put everything back together, the car won't run properly. Starts but idles really rough and evetually stalls. What's puzzling is that the codes indicate a camshaft position sensor problem. I didn't touch that so I am wondering if maybe one or more of the intake manifold gaskets didn't seat properly. Would that cause this problem?

Help!!
Appreciate 0
      11-11-2012, 07:43 PM   #15
Rotorocious
Major
Rotorocious's Avatar
32
Rep
1,461
Posts

 
Drives: 335i
Join Date: May 2010
Location: Florida

iTrader: (3)

Quote:
Originally Posted by JamesM3M5 View Post

New bolts for the valve cover - why? They're steel, not stretched when torqued.
Damn, I bought them anyway. Thought they were alum
Appreciate 0
      11-11-2012, 11:05 PM   #16
Dave W.
Lieutenant
4
Rep
497
Posts

 
Drives: Porsche 951, 1992 Eagle Talon
Join Date: Apr 2012
Location: SF Bay Area

iTrader: (0)

Quote:
Originally Posted by Kenyale View Post
I recently replaced my valve cover gasket on my 2006 330i with the N82 engine. It wasn't easy but I got it done and the problem was solved. Car ran fine after putting everything back together.

Yesterday, I replaced the oil filter housing gasket. The job was fairly easy except I had to partially remove the intake manifold to get to that bolt behind it. Really wasn't that big of a deal but after I put everything back together, the car won't run properly. Starts but idles really rough and evetually stalls. What's puzzling is that the codes indicate a camshaft position sensor problem. I didn't touch that so I am wondering if maybe one or more of the intake manifold gaskets didn't seat properly. Would that cause this problem?

Help!!
N82 engine?
If it's anything like the N52 I can think of 2 possibilities; Did you replace the intake mani gaskets when you took it off?
The wires/plugs for the CPS are on the front sides of the engine. Maybe you damaged one since they're near the same area where you were working?
Appreciate 0
      11-11-2012, 11:14 PM   #17
F3046
Private First Class
1
Rep
108
Posts

 
Drives: F30
Join Date: Oct 2011
Location: NC

iTrader: (3)

from real oem,
valve cover gasket 11127565286
ofh gasket 11427537293

1.the injectors do not have to come off to take off the valve cover, just the feed lines from the rail itself to the injectors.
2.3rd bolt on the ofh can be taken out without having to pull off the intake all you need is a swivel socket and 1/4 inch ratchet
Appreciate 0
      11-12-2012, 09:16 AM   #18
Kenyale
Registered
0
Rep
2
Posts

 
Drives: BMW 330i
Join Date: Nov 2012
Location: Indpls

iTrader: (0)

Quote:
Originally Posted by Dave W. View Post
N82 engine?
If it's anything like the N52 I can think of 2 possibilities; Did you replace the intake mani gaskets when you took it off?
The wires/plugs for the CPS are on the front sides of the engine. Maybe you damaged one since they're near the same area where you were working?
I didn't replace the intake manifold gaskets but I am going to tonight. I am also going to pull and clean the vanos solenoids and then check the wiring because I saw that the wiring for one of the valves goes back over the intake manifold. I am thinking that maybe I damaged the wires to that solenoid when I pulled the manifold.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 07:08 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST