US Air Intake Mod (EURO MOD) Pics Inside.

jokers_greg · 01-27-2012, 07:23 PM

Quote:

Originally Posted by DJ Apex

thats what im doing right now since my mod can be changed by just removing the cone filter and droping in a flat drop filter back in .

just as I was about to try the mod, now I have to wait for this one and make my decision from there. Damnit.

DJ Apex · 01-27-2012, 07:28 PM

Quote:

Originally Posted by jokers_greg

just as I was about to try the mod, now I have to wait for this one and make my decision from there. Damnit.

ide go ahead and do it just dont cut holes in your box and use the filter i used . cause if anything u can always remove the filter and slap in the flat drop in and leave the intake mount flanges in place it wont mess with anything.

DJ Apex · 01-27-2012, 07:32 PM

BTW ANYONE NOT WILLING TO DO THIS MOD AND WANTS A INJEN INTAKE IDE BE MORE THE HAPPY TO DO A EVEN SWAP WITH YA FOR MY INJEN INTAKE, FILTER, AND HEAT SHEILD FOR YOUR FACTORY BOX !!!! just saying i need more boxes to play with lol

jokers_greg · 01-27-2012, 07:32 PM

Quote:

Originally Posted by DJ Apex

ide go ahead and do it just dont cut holes in your box and use the filter i used . cause if anything u can always remove the filter and slap in the flat drop in and leave the intake mount flanges in place it wont mess with anything.

that's true, I'll be placing an order soon then

RupertPupkin · 01-27-2012, 08:49 PM

Quote:

Originally Posted by DJ Apex

BTW ANYONE NOT WILLING TO DO THIS MOD AND WANTS A INJEN INTAKE IDE BE MORE THE HAPPY TO DO A EVEN SWAP WITH YA FOR MY INJEN INTAKE, FILTER, AND HEAT SHEILD FOR YOUR FACTORY BOX !!!! just saying i need more boxes to play with lol

Thats a good ass deal right there.

DJ Apex · 01-27-2012, 08:55 PM

Quote:

Originally Posted by jimmydever

Thats a good ass deal right there.

i know right, now who wants it! <--- sounds so dirty

RupertPupkin · 01-27-2012, 08:55 PM

Quote:

Originally Posted by DJ Apex

i know right, now who wants it! <--- sounds so dirty

Ba dum cha

DJ Apex · 01-27-2012, 08:56 PM

CHOICE

Typhoidrummage · 01-31-2012, 04:08 PM

Quote:

Originally Posted by DJ Apex

BTW ANYONE NOT WILLING TO DO THIS MOD AND WANTS A INJEN INTAKE IDE BE MORE THE HAPPY TO DO A EVEN SWAP WITH YA FOR MY INJEN INTAKE, FILTER, AND HEAT SHEILD FOR YOUR FACTORY BOX !!!! just saying i need more boxes to play with lol

PM sent

carlos916 · 01-31-2012, 09:40 PM

stock box for sell...
http://www.e90post.com/forums/showthread.php?t=638701

RazRokz.! · 02-07-2012, 01:18 PM

Quote:

Originally Posted by jimmydever

Thats a good ass deal right there.

Word, I paid 250 for my injen...

cuco · 11-12-2012, 08:29 PM

DJ Apex, your intake mod project inspired me to proove that the Dinan brand is ridiculously over priced. Went to Auto Zone and bought a Spectre flexible memory hose, used a Dremel to drill a hole in the air box and routed the hose to end up right next to the driver side brake cooling duct. Haven't driven the car with the mod yet but will update. Still trying to figure out how to cover up the inlet with a custom or OEM grille. See pictures and let me know what you think guys.

First clearance test

Final fit

Ram Air Inlet

cuco · 11-13-2012, 09:40 AM

Test drove the car this morning and was pretty amazed. Throttle response is quicker on both default and sport modes. The car feels lighter and easier to accelerate (no pedal lag). Rev increase is smoother and quicker. You can feel the umph from around 2000 rpm and up (more power on low, mid and high ranges). No big difference on engine noise but it definitely sounds stronger and with a deeper tone. I didn't change the filter, i've been using the K&N stock replacement all along. Im very happy about this mod. Dinan claims a 7 HP gain so I guess this mod costs around $4.57 per HP. Not bad.

benzo23 · 11-13-2012, 10:17 AM

Quote:

Originally Posted by cuco

Test drove the car this morning and was pretty amazed. Throttle response is quicker on both default and sport modes. The car feels lighter and easier to accelerate (no pedal lag). Rev increase is smoother and quicker. You can feel the umph from around 2000 rpm and up (more power on low, mid and high ranges). No big difference on engine noise but it definitely sounds stronger and with a deeper tone. I didn't change the filter, i've been using the K&N stock replacement all along. Im very happy about this mod. Dinan claims a 7 HP gain so I guess this mod costs around $4.57 per HP. Not bad.

Great job for doing this, just be careful in the elements I heard that the NE now has a tendency to flood

cuco · 11-13-2012, 10:34 AM

Quote:

Originally Posted by benzo23

Great job for doing this, just be careful in the elements I heard that the NE now has a tendency to flood

Yeah I've been thinking about that, I do have space to play with the inlet position. Maybe I could push it back a bit and point it downwards partially.

cuco · 11-13-2012, 03:17 PM

I test drove the car again since this morning's traffic was pretty bad. This time I was able to floor it a couple of times and man!! That car comes alive after 5k rpm, sounds like a beast and runs like a maniac! So glad I did this.

andrey_gta · 11-13-2012, 06:43 PM

Awesome stuff.

Did you keep Charcoal filter?

Can you post part numbers of the kit? I dont have AutoZone here so will need to improvise.

For some duct ideas look up: sink drain mod for e36 e46 or e39
use the plastic inlet for a speaker tube. Will look sharp.

cuco · 11-13-2012, 06:52 PM

I removed the charcoal filter some time ago. Here is the link for the 3" duct. Thats the only part I've used so far. Still trying to figure out how to cover the inlets (brake and air intake) with a desent grille. The stock grille is partially closed were the air duct is placed.

http://www.spectreperformance.com/in...-diameter.html

vincent.s · 11-14-2012, 08:49 AM

Quote:

Originally Posted by cuco

I removed the charcoal filter some time ago. Here is the link for the 3" duct. Thats the only part I've used so far. Still trying to figure out how to cover the inlets (brake and air intake) with a desent grille. The stock grille is partially closed were the air duct is placed.

http://www.spectreperformance.com/in...-diameter.html

You want then open grid grill here is the part number 51-11-7-134-080

Rival · 11-15-2012, 11:53 AM

Quote:

Originally Posted by cuco

DJ Apex, your intake mod project inspired me to proove that the Dinan brand is ridiculously over priced. Went to Auto Zone and bought a Spectre flexible memory hose, used a Dremel to drill a hole in the air box and routed the hose to end up right next to the driver side brake cooling duct. Haven't driven the car with the mod yet but will update. Still trying to figure out how to cover up the inlet with a custom or OEM grille. See pictures and let me know what you think guys.

First clearance test

Final fit

Ram Air Inlet

So you can do both the Dinian mod and the Euro cone filter mod correct??

cuco · 11-15-2012, 12:02 PM

Absolutely. I don't have the cone filter though. Not sure if it will make a big difference.

cuco · 11-15-2012, 12:08 PM

Quote:

Originally Posted by vincent.s

You want then open grid grill here is the part number 51-11-7-134-080

Thanks! I searched for a while but never found them, I guess I had to look for 335 bumper grids instead of 328. Anyways, I had laready ordered a set of gloss black powder coated mesh grille sheets to fit on the bumper. I'll update once I get them installed.

01-31-2012, 09:40 PM	#98
carlos916 Semper Fi Drives: 08 328i / 05 R6 Join Date: Dec 2010 Location: Sac Town Posts: 405 iTrader: (1) Garage List 2008 E92 328i [2.50]	stock box for sell... http://www.e90post.com/forums/showthread.php?t=638701 __________________
	0

11-12-2012, 08:29 PM	#100
cuco First Lieutenant Drives: 2008 328i //Sport Package// Join Date: May 2012 Location: Cincinnati OH Posts: 319 iTrader: (1) Garage List 2008 BMW 328i [0.00]	Dinan-like Ram Air for 32 dollars DJ Apex, your intake mod project inspired me to proove that the Dinan brand is ridiculously over priced. Went to Auto Zone and bought a Spectre flexible memory hose, used a Dremel to drill a hole in the air box and routed the hose to end up right next to the driver side brake cooling duct. Haven't driven the car with the mod yet but will update. Still trying to figure out how to cover up the inlet with a custom or OEM grille. See pictures and let me know what you think guys. First clearance test Final fit Ram Air Inlet
	0

11-13-2012, 09:40 AM	#101
cuco First Lieutenant Drives: 2008 328i //Sport Package// Join Date: May 2012 Location: Cincinnati OH Posts: 319 iTrader: (1) Garage List 2008 BMW 328i [0.00]	Ram air test drive Test drove the car this morning and was pretty amazed. Throttle response is quicker on both default and sport modes. The car feels lighter and easier to accelerate (no pedal lag). Rev increase is smoother and quicker. You can feel the umph from around 2000 rpm and up (more power on low, mid and high ranges). No big difference on engine noise but it definitely sounds stronger and with a deeper tone. I didn't change the filter, i've been using the K&N stock replacement all along. Im very happy about this mod. Dinan claims a 7 HP gain so I guess this mod costs around $4.57 per HP. Not bad. __________________ 19" VMR v710s//Rogue Ikon//AA Stage 2//335 brake retrofit//M3 cluster retrofit
	0

11-13-2012, 03:17 PM	#104
cuco First Lieutenant Drives: 2008 328i //Sport Package// Join Date: May 2012 Location: Cincinnati OH Posts: 319 iTrader: (1) Garage List 2008 BMW 328i [0.00]	I test drove the car again since this morning's traffic was pretty bad. This time I was able to floor it a couple of times and man!! That car comes alive after 5k rpm, sounds like a beast and runs like a maniac! So glad I did this. __________________ 19" VMR v710s//Rogue Ikon//AA Stage 2//335 brake retrofit//M3 cluster retrofit
	0

11-13-2012, 06:43 PM	#105
andrey_gta Colonel Drives: 130i coupé ;) Join Date: Nov 2011 Location: Bimmerpost Posts: 2,789 iTrader: (1) Garage List 2008 BMW 128i [0.00]	Awesome stuff. Did you keep Charcoal filter? Can you post part numbers of the kit? I dont have AutoZone here so will need to improvise. For some duct ideas look up: sink drain mod for e36 e46 or e39 use the plastic inlet for a speaker tube. Will look sharp. __________________ 128i Sport 6MT converted to Euro 130i spec, tuned by evolve ~220 whp 207 wtq(ft-lb) SAE In-progress: e46 m3 trans mnt, e36M lip Wishlist: m3 susp, n55 eng mnt, headers, LSD, finn dif e60 "The 1-series is the last car that BMW engineered before the Germans, as a car-making culture, fell out of love with driving." - R&T 2013 135is
	0

01-27-2012, 07:32 PM	#91
DJ Apex Lieutenant Drives: 2006 330i Join Date: Nov 2010 Location: Houston TX Posts: 479 iTrader: (1)	BTW ANYONE NOT WILLING TO DO THIS MOD AND WANTS A INJEN INTAKE IDE BE MORE THE HAPPY TO DO A EVEN SWAP WITH YA FOR MY INJEN INTAKE, FILTER, AND HEAT SHEILD FOR YOUR FACTORY BOX !!!! just saying i need more boxes to play with lol
	0

01-27-2012, 08:56 PM	#96
DJ Apex Lieutenant Drives: 2006 330i Join Date: Nov 2010 Location: Houston TX Posts: 479 iTrader: (1)	CHOICE
	0

11-13-2012, 06:52 PM	#106
cuco First Lieutenant Drives: 2008 328i //Sport Package// Join Date: May 2012 Location: Cincinnati OH Posts: 319 iTrader: (1) Garage List 2008 BMW 328i [0.00]	I removed the charcoal filter some time ago. Here is the link for the 3" duct. Thats the only part I've used so far. Still trying to figure out how to cover the inlets (brake and air intake) with a desent grille. The stock grille is partially closed were the air duct is placed. http://www.spectreperformance.com/in...-diameter.html __________________ 19" VMR v710s//Rogue Ikon//AA Stage 2//335 brake retrofit//M3 cluster retrofit
	0

11-15-2012, 12:02 PM	#109
cuco First Lieutenant Drives: 2008 328i //Sport Package// Join Date: May 2012 Location: Cincinnati OH Posts: 319 iTrader: (1) Garage List 2008 BMW 328i [0.00]	Absolutely. I don't have the cone filter though. Not sure if it will make a big difference. __________________ 19" VMR v710s//Rogue Ikon//AA Stage 2//335 brake retrofit//M3 cluster retrofit
	0

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search