E90Post
 


GTB Performance
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > LOW BOOST 15-16psi, No Meth FFTEC /VISHNU 62 SINGLE KIT 6mt



Reply
 
Thread Tools Search this Thread
      11-11-2012, 02:31 PM   #1
stg3MB335i
Enlisted Member
 
Drives: 2008 single T 62/62 6spd 335i
Join Date: Aug 2011
Location: ephrata, pa

Posts: 46
iTrader: (0)

LOW BOOST 15-16psi, No Meth FFTEC /VISHNU 62 SINGLE KIT 6mt

http://www.youtube.com/watch?v=QetCw...layer_embedded

Shitty video i know, But at least it's something for you guys to check out, i'll have some more up shortly NOT takin by a cell phone and with some more detail. Don't have the upgraded stage 3 spec clutch in yet because i had just replaced OEM under warrenty at 50k so im using it up, once i upgrade the clutch, i'll install the meth and 2-step, then it's time for some real fun. Amazing kit though, Installed myself in under 12 hours qouted install time. Great job FFTEC/VISHNU.


FFTEC/VISHNU single 62/62 VF700 kit
quad nozzle Vishnu meth kit "not installed yet" tapped for it though.
Quaife LSD, Full H&R race coils, M3 subframe bushings
upgraded FMIC
AA BOV/ charge pipe, and vishnu charge pipe, not sure which i'd like to use yet, as of now, AA is still in.
Procede REV 3 single turbo Software
SPEC stage 3 Clutch on the way.
AEM 3.5 BAR MAP sensor
44 external waste gate with dump tube to atmosphere, some people love it, some hate it, I LOVE it!
straight pipe exhaust turbo back, to two magnaflow mufflers.


More video's on the way, along with some dyno pulls, once clutch is installed.
Attached Images
         
stg3MB335i is offline  
0
Reply With Quote
      11-11-2012, 02:41 PM   #2
bigdnno98
Major
 
bigdnno98's Avatar
 
Drives: 09 e92 335i MT
Join Date: Jul 2011
Location: Clarksville, TN

Posts: 1,143
iTrader: (7)

Congrats. Beautiful kit. I'd love to see one tuned by someone else though for some direct comparisons.
__________________
New Project....... 2.4L Long Rod motor for my EVO
03 Evo 8 HTA3582r Blown Motor
09 e92 335i MT Sold 440hp/480tq
bigdnno98 is offline  
0
Reply With Quote
      11-11-2012, 02:58 PM   #3
JMARS
Not Baned
 
Drives: Single-T WTCC e90
Join Date: Aug 2008
Location: Boca Raton, FL

Posts: 1,148
iTrader: (5)

Cant wait to see my kit running already!!! Ahh!!! Congrats bro!
JMARS is online now   Brazil
0
Reply With Quote
      11-11-2012, 06:21 PM   #4
stg3MB335i
Enlisted Member
 
Drives: 2008 single T 62/62 6spd 335i
Join Date: Aug 2011
Location: ephrata, pa

Posts: 46
iTrader: (0)

Thanks guys, ahh man you're going to LOVE it, honestly feels like a mid range supra, but with all the luxury you could want, And yes it would be interesting to see one of these setups tuned by someone else, BUT it is very very tricky to do so, you must know your shit with how to tune a vechical such as the 335. And Shiv does very well know.
stg3MB335i is offline  
0
Reply With Quote
      11-11-2012, 06:24 PM   #5
stg3MB335i
Enlisted Member
 
Drives: 2008 single T 62/62 6spd 335i
Join Date: Aug 2011
Location: ephrata, pa

Posts: 46
iTrader: (0)

And wow just realized now how filthy my engine bay is, that will also be cleaned up within the next few weeks, haha.
stg3MB335i is offline  
0
Reply With Quote
      11-11-2012, 06:30 PM   #6
BigBoosting
Second Lieutenant
 
Drives: 09' M3 6MT
Join Date: Aug 2012
Location: Savannah

Posts: 294
iTrader: (2)

What is up with that turbine side? Is the cut and welded area for the wastegate? Seems as if that would really effect flow going into the turbine wheel.
BigBoosting is online now  
0
Reply With Quote
      11-11-2012, 06:30 PM   #7
cupertinosteve
Second Lieutenant
 
Drives: BMW 335i
Join Date: Nov 2011
Location: Cupertino, Duh?

Posts: 213
iTrader: (0)

Under 12 hours? Nicely done. I can't imagine how much faster it would be the next time around.
__________________
Vishnu/FFTEC Single Turbo (58mm) 6AT ... 60-130 in 6.881 seconds
Vishnu Procede Rev.3, Vishnu PWM Meth Kit, AE Exhaust, Helix IC, Forge DVs, Wavetrac LSD
#### IT'S FOR SALE ###
cupertinosteve is offline   United_States
0
Reply With Quote
      11-11-2012, 10:05 PM   #8
stg3MB335i
Enlisted Member
 
Drives: 2008 single T 62/62 6spd 335i
Join Date: Aug 2011
Location: ephrata, pa

Posts: 46
iTrader: (0)

Quote:
Originally Posted by BigBoosting View Post
What is up with that turbine side? Is the cut and welded area for the wastegate? Seems as if that would really effect flow going into the turbine wheel.
yes, for wastegate, actually from what i've read about that, it's one of the best spots for boost release out of the turbine housing, apparently how a lot of boosted race,drift, cars run there turbos.
stg3MB335i is offline  
0
Reply With Quote
      11-11-2012, 10:07 PM   #9
stg3MB335i
Enlisted Member
 
Drives: 2008 single T 62/62 6spd 335i
Join Date: Aug 2011
Location: ephrata, pa

Posts: 46
iTrader: (0)

Quote:
Originally Posted by cupertinosteve View Post
Under 12 hours? Nicely done. I can't imagine how much faster it would be the next time around.
Haha yeah, basically just posted that so people knew it could be done and it's not difficult at all, as long as you have a basic understanding of how to install the kit.
stg3MB335i is offline  
0
Reply With Quote
      11-11-2012, 10:26 PM   #10
BigBoosting
Second Lieutenant
 
Drives: 09' M3 6MT
Join Date: Aug 2012
Location: Savannah

Posts: 294
iTrader: (2)

Quote:
Originally Posted by stg3MB335i View Post
yes, for wastegate, actually from what i've read about that, it's one of the best spots for boost release out of the turbine housing, apparently how a lot of boosted race,drift, cars run there turbos.
Interesting, I was just a little shocked as that is the first time I have seen that.
BigBoosting is online now  
0
Reply With Quote
      11-11-2012, 11:16 PM   #11
joec500
Brigadier General
 
Drives: it has 4 wheels
Join Date: Jul 2008
Location: San Francisco

Posts: 3,004
iTrader: (10)

Your stock clutch will slip right away, the clamping force is just not there for this kit. When I pulled out my stock clutch it looked great, but it was slipping with just the FlexFuel Kit.!
__________________
2007 E92 6MT SGM: MusicarNW Level 2, Procede Rev 2.5, FFTEC/Vishnu LPFP with Flexfuel Sensor and Flash, M3 Offset V701's, WaveTrac LSD, Michelin PSS, Downpipes, M3 Control Arms, TCKline D/A Suspension, LCI Tail lights, Lux AE's, ER Charge Pipe, DCI's, Mtech Front and Rear, M3 Sideskirts, HPF Stage 1 Clutch
joec500 is offline  
0
Reply With Quote
      11-11-2012, 11:38 PM   #12
jb's335
Big Boost Addict
 
Drives: AW e92 335
Join Date: Aug 2008
Location: Lima, OH

Posts: 683
iTrader: (12)

Why did you only wrap half of the exhaust manifold? The kit comes with plenty of wrap for the entire manifold...and thats the best place to utilize it to keep temps down underhood and your engine cover from melting.

Congrats on the kit. I too am running the VFF700 no meth at the moment. What PSI are you running right now?
jb's335 is offline   United_States
0
Reply With Quote
      11-12-2012, 12:06 AM   #13
trbolexis
Private
 
Drives: Lexus IS300
Join Date: Sep 2012
Location: CA

Posts: 73
iTrader: (0)

Cool

Quote:
Originally Posted by jb's335 View Post
Why did you only wrap half of the exhaust manifold? The kit comes with plenty of wrap for the entire manifold...and thats the best place to utilize it to keep temps down underhood and your engine cover from melting.
Im with this guy. You didn't seem to wrap where it would be most effective - the entire manifold The idea is to focus all of the heat/energy into the turbine, as well as keep underhood temps DOWN.

Take it easy on back to back pulls, that manifold will be glowing red ...

Anyways - Congrats on the install and getting the car going! I know its not an easy task!!
trbolexis is offline  
0
Reply With Quote
      11-12-2012, 12:08 AM   #14
BoostAddict
Captain
 
BoostAddict's Avatar
 
Drives: SGM 335i
Join Date: Jan 2010
Location: Boynton Beach, FL

Posts: 911
iTrader: (4)

I love the exhaust note of these single turbo cars.
__________________
I do Installs and flash tuning in South Florida
-2008 335i SGM on Terra 6mt
-1997 Jetta TDi 16v ABA Pt6266
-1997 M3 Pt6766
BoostAddict is offline   United_States
0
Reply With Quote
      11-12-2012, 02:51 AM   #15
mazspeed
Private First Class
 
Drives: 08' E92 M3, 13' S1000RR
Join Date: Apr 2012
Location: Lebanon, Pa

Posts: 128
iTrader: (0)

Whats up man! Get it tuned, wanna see it run the gtr! lol
__________________
[[08' e92 ///M3 AW 6mt::Work Vs-xx]] [[94' Turbo Miata] [[13' S1000RR,71' cl175 Scrambler,78' cb125s]]
mazspeed is offline   United_States
0
Reply With Quote
      11-12-2012, 03:11 AM   #16
Mahhvinn
EUROPROJEKTZ
 
Mahhvinn's Avatar
 
Drives: backwards
Join Date: Dec 2008
Location: San Jose, CA (Bay Area)

Posts: 7,894
iTrader: (15)

Garage List
2008 E90 335i  [3.50]
sounds good. can't wait to see more!
__________________
LTMW|SPEEDELEMENT|EUROPROJEKTZ

#TeamStretchNPoke
Mahhvinn is offline   United_States
0
Reply With Quote
      11-13-2012, 12:29 PM   #17
stg3MB335i
Enlisted Member
 
Drives: 2008 single T 62/62 6spd 335i
Join Date: Aug 2011
Location: ephrata, pa

Posts: 46
iTrader: (0)

Quote:
Originally Posted by mazspeed View Post
Whats up man! Get it tuned, wanna see it run the gtr! lol
hahaha what up man, ohhh it's good to go now man, i mean clutch might slip but that check engine problem is fixed. hit your boy up i wanna get some videos to post on here running a GTR.
stg3MB335i is offline  
0
Reply With Quote
      11-13-2012, 12:35 PM   #18
Airdanny
Private
 
Drives: 2008 e90 335i
Join Date: Mar 2012
Location: Puerto Rico

Posts: 55
iTrader: (0)

Sweet!!! Sexy ass kit, enjoy it.
__________________
Airdanny is offline  
0
Reply With Quote
      11-13-2012, 12:36 PM   #19
stg3MB335i
Enlisted Member
 
Drives: 2008 single T 62/62 6spd 335i
Join Date: Aug 2011
Location: ephrata, pa

Posts: 46
iTrader: (0)

Quote:
Originally Posted by trbolexis View Post
Im with this guy. You didn't seem to wrap where it would be most effective - the entire manifold The idea is to focus all of the heat/energy into the turbine, as well as keep underhood temps DOWN.

Take it easy on back to back pulls, that manifold will be glowing red ...

Anyways - Congrats on the install and getting the car going! I know its not an easy task!!
Yes, you guys are both correct, i'm not sure what i was thinking NOT wrapping the full manifold, i gues after 3 hours of sitting in a chair trying to do just that so it wouldnt look like shit was long enough, then i looked at the center area, and thought i have no idea how im going to wrap that and it not look like shit, BUT its right where the plastic valve cover meets the alum head, so yes before i get that thing red i will NEED to wrap it, ANYONE that has not yet installed kit, NOTE this, and wrap full manifold no matter what.
stg3MB335i is offline  
0
Reply With Quote
      11-13-2012, 12:39 PM   #20
stg3MB335i
Enlisted Member
 
Drives: 2008 single T 62/62 6spd 335i
Join Date: Aug 2011
Location: ephrata, pa

Posts: 46
iTrader: (0)

Quote:
Originally Posted by joec500 View Post
Your stock clutch will slip right away, the clamping force is just not there for this kit. When I pulled out my stock clutch it looked great, but it was slipping with just the FlexFuel Kit.!
Actually surprising enough, on low boost, no meth my clutch is not yet slipping, only had clutch installed around 10k ago under warrenty, so its very new, BUT yes i know what you mean, it just feels soo weak, and lose, it's hard to explain if you havent felt your self. But new one will be in shortly. stage 3 spec.
stg3MB335i is offline  
0
Reply With Quote
      11-13-2012, 12:47 PM   #21
joec500
Brigadier General
 
Drives: it has 4 wheels
Join Date: Jul 2008
Location: San Francisco

Posts: 3,004
iTrader: (10)

Quote:
Originally Posted by stg3MB335i View Post
Actually surprising enough, on low boost, no meth my clutch is not yet slipping, only had clutch installed around 10k ago under warrenty, so its very new, BUT yes i know what you mean, it just feels soo weak, and lose, it's hard to explain if you havent felt your self. But new one will be in shortly. stage 3 spec.
Wait till you romp on it in high RPMS in 3rd and 4th!!!
__________________
2007 E92 6MT SGM: MusicarNW Level 2, Procede Rev 2.5, FFTEC/Vishnu LPFP with Flexfuel Sensor and Flash, M3 Offset V701's, WaveTrac LSD, Michelin PSS, Downpipes, M3 Control Arms, TCKline D/A Suspension, LCI Tail lights, Lux AE's, ER Charge Pipe, DCI's, Mtech Front and Rear, M3 Sideskirts, HPF Stage 1 Clutch
joec500 is offline  
0
Reply With Quote
      11-13-2012, 01:09 PM   #22
MikeB@fftec
Private First Class
 
MikeB@fftec's Avatar
 
Drives: 03 Evo 8
Join Date: Jan 2012
Location: Bay Area, CA

Posts: 181
iTrader: (0)

Send a message via AIM to MikeB@fftec
Congrats! Wait until you get the meth kit and start making some serious power!
MikeB@fftec is offline   United_States
0
Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 09:32 AM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST